최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.33 no.3, 2020년, pp.161 - 168
은종현 (Department of Fiber System Engineering, Yeungnam University) , 곽재원 (Department of Fiber System Engineering, Yeungnam University) , 김기정 (Department of Fiber System Engineering, Yeungnam University) , 김민성 (Department of Fiber System Engineering, Yeungnam University) , 성선민 (Department of Fiber System Engineering, Yeungnam University) , 최보경 (Department of Fiber System Engineering, Yeungnam University) , 김동현 (Department of Fiber System Engineering, Yeungnam University) , 이준석 (Department of Fiber System Engineering, Yeungnam University)
In this paper, we have studied the mechanical properties of thermoplastic carbon fiber fabric composites with spread technology and compression molding temperature were investigated. Carbon fiber reinforcement composites were fabricated using commercial carbon fiber fabrics and spread carbon fiber f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
탄소섬유 강화복합재료란 무엇인가? | 탄소섬유 강화복합재료는 우수한 비강도 및 비강성, 경량성, 내피로성 및 내약품성을 가진 전도 유망한 소재이다 [1]. 그 중 열가소성 수지를 사용한 탄소섬유 강화복합재료 (Carbon fiber Reinforced Thermoplastic Plastics)는 열경화성 탄소섬유 강화복합재료(Carbon fiber Reinforced Thermoset Plastics)에 비해 생산 비용이 적고, 유지 및 보수가 용이한 장점이 있다. | |
열가소성 수지를 사용한 탄소섬유 강화복합재료의 특징은 무엇인가? | 탄소섬유 강화복합재료는 우수한 비강도 및 비강성, 경량성, 내피로성 및 내약품성을 가진 전도 유망한 소재이다 [1]. 그 중 열가소성 수지를 사용한 탄소섬유 강화복합재료 (Carbon fiber Reinforced Thermoplastic Plastics)는 열경화성 탄소섬유 강화복합재료(Carbon fiber Reinforced Thermoset Plastics)에 비해 생산 비용이 적고, 유지 및 보수가 용이한 장점이 있다. 이러한 특징으로 인해 건축, 토목, 선박, 스포츠 용품, 자동차 및 의료기기 등 경량화가 요구되는 산업에 널리 사용되고 있다[2-5]. | |
열가소성 수지의 섬유 함침에 대한 문제점을 해결하기 위한 방법은 어떤 것이 있는가? | 하지만 열가소성 수지의 높은 점도로 인해 수지의 흐름 성이 낮아 고온에서 복합재료를 제조해야 하며 섬유 함침이 제한적이다. 이러한 문제점을 해결하기 위해 수지와 섬유의 거리를 좁히거나, 섬유 형태의 수지와 강화재인 섬유를 합사하는 코밍글법(Comingled)을 통해 수지의 함침 거리를 최소화하는 방법이 있고, 비교적 점도가 낮은 모노머 상태의 열가소성 수지를 사용하여 성형 도중 모노머를 폴리머로 중합하는 방법, 용매를 사용하여 수지를 용해시키는 방법 등이 있다[6]. Bernet 등은 방사된 Polyamide 12와 탄소섬유를 합사하여 열가소성 탄소섬유 복합재료를 제조하여 기계적 특성, 형상 인자와 고화 속도의 관계에 대해 연구하였다[7]. |
Morgan, P., Carbon Fibers and Their Composites, Boca Raton: Taylor and Francis, New York, U.S, pp. 121-184, 2005.
Chang, I.Y., and Lees, J.K., "Recent Development in Thermoplastic Composites: A Review of Matrix Systems and Processing Methods," Journal of Thermoplastic Composite Materials, Vol. 1, Iss. 3, 1988, pp. 277-296.
Lee, S.M., Thermoplastic Matrix Composites, International Encyclopaedia of Composites, VCH Pub., New York, USA, 1991, pp. 10-34.
Shin, S.W., Kim, R.Y., Kawabe, K., and Tsai, S., "Experimental Studies of Thin-ply Laminated Composites," Composites Science and Technology, Vol. 67, 2007, pp. 996-1008.
Gibson, A.G., and Manson, J.A., "Impregnation Technology for Thermoplastic Matrix Composites," Composites Manufacturing, Vol. 3, Iss. 4, 1992, pp. 223-233.
Bernet, N., Michaud, V., Bourban, P.E., and Manson, J.A.E., "An Impregnation Model for the Consolidation of Thermoplastic Composites Made from Commingled Yarns," Journal of Composite Materials, Vol. 33, Iss. 8, 1999, pp. 751-772.
El-Dessouky, H.M., and Lawrence, C.A., "Ultra-lightweight Carbon Fibre/Thermoplastic Composite Material Using Spread Tow Technology," Composites Part B: Engineering, Vol. 50, 2013, pp. 91-97.
Kawabe, K., Sasayama, H., and Tomoda, S., "New Carbon Fiber Tow-Spread Technology and Applications to Advanced Composite Material," Sampe Journal, Vol. 45, No. 2, 2009, pp. 6-17.
Kim, R.Y., and Soni, S.R., "Experimental and Analytical Studies On the Onset of Delamination in Laminated Composites," Journal of Composite Materials, Vol. 18, No. 1, 1984, pp. 70-80.
Rodini, B.T., and Eisenmann, J.R., An Analytical and Experimental Investigation of Edge Delamination in Composites Laminates, Fibrous Composites in Structural Design, Plenum Press, NY, 1980, pp. 441-457.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.