최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국압력기기공학회 논문집 = Transactions of the Korean Society of Pressure Vessels and Piping, v.16 no.1, 2020년, pp.92 - 99
High-temperature mechanical behaviors of Type 316L stainless steel (SS), which is considered as one of the major structural materials of Generation-IV nuclear reactors, were investigated through the tension and creep tests at elevated temperatures. The tension tests were performed under the strain r...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Type 316 SS은 무엇인가? | Type 316 SS (stainless steel, UNS S31600)는 크롬(Cr)- 니켈(Ni)-몰리(Mo) 합금으로 18(Cr)-8(Ni) grade의 Type 304 SS1에다 Mo 함량을 새로이 첨가시켜 부식 저항성과 고온특성을 높게 한 것이다. 이러한 Type 316 SS에다 탄소 함유량을 최대 0. | |
L-grade의 Type 316L SS (UNS S31603)2는 Type 316 SS에다 탄소 함유량을 얼마나 저감시킨 것인가? | Type 316 SS (stainless steel, UNS S31600)는 크롬(Cr)- 니켈(Ni)-몰리(Mo) 합금으로 18(Cr)-8(Ni) grade의 Type 304 SS1에다 Mo 함량을 새로이 첨가시켜 부식 저항성과 고온특성을 높게 한 것이다. 이러한 Type 316 SS에다 탄소 함유량을 최대 0.03% 이하로 저감시킨 “L-grade”의 Type 316L SS (UNS S31603)2는 입계부식 저항성과 크리프 특성, 제작성과 용접 성이 우수하여 제4세대 원자로 (Generation–IV nuclear reactor) 의 고온 배관, 압력용기나 노내구조물 (reactor internals) 등의 주요 구조재료로 유망하다. Type 316L 강을 제4세대 원자로에 적용하기 위해서는 설계 시 필요한다양한 고온 물성자료들이 구축되어야 하지만 매우 부족하다. | |
크리프 시험 물성 자료에 다양한 온도범위까지 확장시키기 위해 필요한 온도의 자료는? | 그러나 고온 설계에 필요한 재료물성 시험 자료는 아직 상당부분 불충분하므로 새롭게 구축되어야 한다. 특히 크리프 물성 자료의 경우 RCC-MRx에서는 550℃, 575℃ 및 600 ℃의 3가지 온도에 대한 크리프 강도 자료만 제시되어 있을 뿐 이외의 온도인 500℃, 650℃ 및 700℃ 등에 대한 크리프 강도 자료는 없다. 따라서 크리프 시험 물성 자료를 설계목적에 충분할 정도로 마련하기 위하여 다양한 온도범위까지 확장시키는 것이 필요하다. |
www.aksteel.com, 2007, "304/304L Stainless Steel Data Sheet," 7100-0096 7/07, AK Steel Corporation, OH USA.
www.outokumpu.com, 2014, "Outokumpu High Performance Stainless," 1087EN, Bannockburn USA.
Afcen RCC-MRx Code, 2015, Section III-Tome 1-Subsection Z: Technical Appendics, France.
Afcen RCC-MRx Code, 2018, Section III-Tome 2: Materials, France.
ASTM E8M-17, 2017, "Standard test method for Tension Testing of Metallic Materials," ASTM Standard.
Kim, J.M., Kim, W.G. and Kim, M.C., 2019, "Evaluation of Creep Behaviors of Alloy 690 Steam Generator Tubing Material," Trans. of KPVP, Vol. 14, No.1, pp. 64-70. doi: http://dx.doi.org/10.20466/ KPVP.2019.15.2.064.
ASTM E139-17, 2017, "Standard Test Method for Conducting Creep, Creep-Rupture And Stress Rupture Tests of Metallic Materials," ASTM Standard.
Kim, W.G. Park, J.Y. Ekaputra, I.M.W., Kim, S.J., Kim, M.H. and Kim, Y.W., 2015, "Creep Deformation and Rupture Behavior of Alloy 617," Eng. Fail. Anal., Vol. 58, pp. 441-451.
Monkman, F.C. and Grant, N.J., 1956, "An Empirical Relationship Between Rupture Life and Minimum Creep Rate in Creep Rupture Tests," ASTM Proc., Vol. 56, pp. 593-620.
Guguloth, K. and Roy, N., 2017, "Creep Deformation Behavior of 9CrMoVNb (ASME Grade 91) Steel," Mater. Sci. Eng. A., Vol. 680, pp. 386-404.
Choudhary, B.K., 2013, "Tertiary Creep Behaviour of 9Cr-1Mo Ferritic Steel," Mater. Sci. Eng. A., Vol. 585, pp. 1-9.
B.K. Choudhary, E. Issac Samual, 2011, "Creep Behavior of Modified 9Cr-1Mo Ferritic Steel," J. Nucl. Mater, 412, pp. 82-89.
Benz, J.K. Carroll, L.J., Wright, J.K., Wright, R.N. and Lillo, T.M., 2014, "Threshold Stress Creep Behavior of Alloy 617 at Intermediate Temperature," Metall. Mater. Trans. A, Vol. 45A, pp. 3010-3022.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.