최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국결정성장학회지 = Journal of the Korean crystal growth and crystal technology, v.30 no.4, 2020년, pp.131 - 135
최현민 ((주)한미보석감정원) , 김영출 ((주)한미보석감정원) , 석정원 (동신대학교 신소재에너지전공)
Single crystal phased CaZrO3 : Eu3+ phosphor have been synthesized by skull melting method. The crystal structure, morphology and optical properties of synthesized phosphor were investigated XRD (X-ray diffraction), SEM (scanning electron microscopy), UV (ultraviolet) fluorescence reaction and PL (p...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
CaZrO3를호스트로 하는 형광체는 주로 고상반응법 및 졸-겔법에 의한 합성연구가 진행되는데, 각각은 어떻게 합성하는가? | CaZrO3를호스트로 하는 형광체는 주로 고상반응법 및 졸-겔법에 의한 합성연구가 진행되고 있다. 고상반응법의 경우 일반적으로 CaCO3와 ZrO2를 혼합하여 1300~1400o C에서 합성하며[9,10], 졸-겔법의 경우 Ca(NO3)2∙4H2O)과 ZrO(NO3)2∙ XH2O 또는 ZrN2O7 등을 졸-겔 반응을 시켜 합성이 가능하다[11,12]. 이 밖에도 형광체 합성을 위해 호스트에 사용하는 화합물은 (Ca, Ba, Mg)Al2O4 및 (Cd, Ca, Sr, Ba, Mg)SiO3 등이 있으며, Mn, Cu, Nd, Eu, Tb 및 Dy 등을 첨가하여 적색, 청색 또는 녹색 형광체를 합성하는 연구가 꾸준히 진행되고 있다[13]. | |
CaZrO3는 무엇으로 사용되는가? | 또 다른 산화물계 형광체로는 페로브스카이트 구조를 가지는 CaZrO3이다. CaZrO3는 형광체 호스트재료 뿐만 아니라 다층 세라믹 캐퍼시터, 고체전해질 및 촉매제 등 광범위하게 사용되고 있다[7,8]. CaZrO3를호스트로 하는 형광체는 주로 고상반응법 및 졸-겔법에 의한 합성연구가 진행되고 있다. | |
Skull melting법으로 형광체를 합성 시 장점은 무엇인가? | Skull melting 법은 대표적으로 YSZ(yttria-stabilized cubic zirconia) 단결정 합성 및 금속의 합금 등에 응용된다[14,15]. Skull melting법으로 형광체를 합성 시 기존의 합성방법에 비해 비교적 원료 준비가 간단하며, 원료의 용융시간이 비교적 짧고, 원료의 회수율이 높은 장점이 있어 산화물 용용 및 합성연구에 그 활용 가치가 매우 크다고 할 수 있다[16]. |
S. Gultekin, S. Yildirim, O. Yilmaz, I.C. Keskin, M.I. Kati and E. Celik, "Structural and optical properties of $SrAl_2O_4$ : $Eu^{2+}/Dy^{3+}$ phosphors synthesized by flame spray pyrolysis technique", J. Lumin. 206 (2019) 59.
I. Aydin, K. Ertekin, S. Demirci, S. Gultekin and E. Celik, "Sol-gel synthesized $Sr_4Al_{14}O_{25}$ : $Eu^{2+}/Dy^{3+}$ blue-green phosphorous as oxygen sensing materials", Opt. Mater. 62 (2016) 285.
W. Jia, H. Yuan, L. Lu, H. Liu and W.M. Yen, "Crystal growth and characterization of $Eu^{2+}$ , $Dy^{3+}$ : $SrAl_2O_4$ and $Eu^{2+}$ , $Nd^{3+}$ : $CaAl_2O_4$ by the LHPG method", J. Cryst. Growth 200 (1999) 179.
X. Liu, Z. Song, S. Wang and Q. Liu, "The red persistent luminescence of (Sr, Ca) $AlSiN_3$ : $Eu^{2+}$ and mechanism different to $SrAl_2O_4$ : $Eu^{2+}$ , $Dy^{3+}$ ", J. Lumin. 208 (2019) 313.
R.E. Rojas-Hernandez, F. Rubio-Marcos, A. Serrano, I. Hussainova and J.F. Fernandez, "Boosting phosphorescence efficiency by crystal anisotropy in $SrAl_2O_4$ : Eu,Dy textured ceramic layers", J. Eur. Ceram. Soc. 40 (2020) 1677.
Z. Yanan, P. Zengyuan, W. Jian, G. Mingqiao, S. Sijin, H. Zehua, Z. Jiahe, G. Jiaxin and J. Fusheng, "Effect of light conversion agent on luminous properties of a new down-converting material $SrAl_2O_4$ : $Eu^{2+}$ , $Dy^{3+}$ /light conversion agent", J. of Rare Earths 34 (2016) 483.
R. Ianos and P. Barvinschi, "Solution combustion synthesis of calcium zirconate, $CaZrO_3$ , powders", J. Solid State Chem. 183 (2010) 491.
H. Zhang, X. Fu, S. Niu and Q. Xin, "Blue luminescence of nanocrystalline $CaZrO_3$ : Tm phosphors synthesized by a modified Pechini sol-gel method", J. Lumin. 128 (2008) 1348.
Z. Liu, Y. Liu, J. Zhang, J. Rong, L. Huang and D. Yuan, "Long afterglow in $Pr^{3+}$ and $Li^+$ co-doped $CaZrO_3$ ", Opt. Commun. 251 (2005) 389.
I.P. Sahu, D.P. Bisen, R.K. Tamrakar, K.V.R. Murthy and M. Mohapatra, "Studies on the luminescence properties of $CaZrO_3$ : $Eu^{3+}$ phosphors prepared by the solid state reaction method", J. Science 2 (2017) 70.
B. Evangeline, P. Abdul Azeem, R. Prasada Rao, G. Swati and D. Haranath, "Structural and luminescent features of cerium doped $CaZrO_3$ blue nanophosphors", J. Alloy. Compd. 705 (2017) 618.
Sheetal V.B. Taxak, S. Shingh and Mandeep S.P. Khatkar, "Synthesis and optical properties of red emitting Eu doped $CaZrO_3$ phosphor", Opt. 125 (2014) 6340.
R.E. Rojas-Hernandez, F. Rubio-Marcos, M.A. Rodriguez and J.F. Fernandez, "Long lasting phosphors: $SrAl_2O_4$ : Eu, Dy as the most studied material", Renew. Sustain Energy Rev 81 (2018) 2760.
X. Jiayue, L. Xiuyun, J. Xin, H. Qingbo, F. Yongzheng, Z. Daobiao and H. Xuemei, "Industrial growth of yttria-stabilized cubic zirconia crystals by skull melting process", J. Rare Earths 27 (2009) 971.
G. Sugilal, J. Jha, Shaskikumar, M.H. Rao, K. Banerjee and G.K. Dey, "Indigenous development of induction skull melting technology for electromagnetic processing of refractory and reactive metals and alloys", Mater. Today 3 (2016) 2942.
R. Chen, Y. Yang, H. Fang, Y. Yang, Q. Wang, J. Guo, H. Ding, Y. Su and H. Fu, "Glass melting inside electromagnetic cold crucible using induction skull melting technology", App. Therm. Eng. 121 (2017) 146.
J. Huang, L. Zhou, Y. Lan, F. Gong, Q. Li and J. Sun, "Synthesis and luminescence properties of the red phosphor $CaZrO_3$ : $Eu^{3+}$ for white light-emitting diode application", Cent. Eur. J. Phys. 9 (2011) 977.
Y. Shimokawa, S. Sakaida, S. Iwata, K. Inoue, S. Honda and Yuji Iwamoto, "Synthesis and characterization of $Eu^{3+}$ doped $CaZrO^{3-}$ based perovskite type phosphors. part II: PL properties related to the two different dominant $Eu^{3+}$ substitution sites", J. Lumin. 157 (2015) 114.
Z. He, X.Y. Sun and X. Gu, "Enhancements of luminescent properties of $CaZrO_3$ : $Eu^{3+}$ by $A^+$ (A Li, Na, K)", Chem. Phys. 513 (2018) 94.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.