최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korea Water Resources Association = 한국수자원학회논문집, v.53 no.8, 2020년, pp.617 - 626
정대진 (한국농어촌공사 대단위간척처) , 장창래 (한국교통대학교 토목공학과) , 정관수 (충남대학교 토목공학과)
This study investigates changes of bifurcation discharge ratio, flow velocity distributions and characteristics of separation zone due to variation of bifurcation angle by using TELEMAC-2D model. When the bifurcation angle is reduced from 90° to 45° without changing the boundary condit...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
하천은 일반적으로 어떤 것들이 연속적으로 연결되어 있는가? | 하천은 일반적으로 직선구간(straight), 사행구간(meander), 그리고 합류(confluence)와 분류(bifurcation)가 연속적으로 연결되어 있다. 하천에서 분류부는 충적 선상지, 망상하천, 하천 저수로, 델타에서 흔히 볼 수 있다. | |
De Heer and Mosselman (2004)의 30°개수로 분류부 실내실험 결과에서 와(eddy)의 크기가 주수로에서는 크고 분류수로에서는 작게 모의되었는데, 그 주요 원인은 무엇인가? | 하지만 De Heer and Mosselman (2004)은 30°개수로 분류부 실내실험 결과에 대해 정렬격자를 사용한 수치 모의에서 실험결과보다 와(eddy)의 크기가 주수로에서는 크고 분류수로에서는 작게 모의되었다. 이것은 정렬격자를 이용한 수치모의를 위해 분류수로 시점부 상류 부분을 곡선형으로 격자를 구성한 것과 정렬격자망에서 분류각이 작아질수록 격자의 직교성과 grid smoothness로 인한 편차로 이산화공식에서 절단오차의 증가가 주요 원인으로 분석되었다. | |
TELEMAC-2D는 난류 계산을 위해 어떤 것들을 적용할 수 있는가? | TELEMAC-2D는 난류 계산을 위해 Constant Viscosity, Elder Model, Smagorinski Model, k-Ɛ Model을 적용할 수 있다. Constant viscosity는 난류점성을 전체 해석영역에 대해 일정한 값을 부여하고, Elder Model은 주흐름의 종·횡방향 난류점성을 각각 일정한 값을 부여함에 따라 재순환 영역의 형태와 정도에 영향을 미친다. |
Afrouz, A., Heidarnejad, M., Aghamajidi, M., and Jalilian, H. (2015). "Effect study of water intaking angle through flow regime at straight canal." Larhyss Journal, Vol. 23, pp. 203-211.
American Institute of Aeronautics and Astronautics (AIAA) (1998). Guide for the verification and validation of computational fluid dynamics simulations. AIAA Report, G-077-1998, VA, U.S., pp. 1-19.
Alomari, N.K., and Khaleel, M.S. (2012). "Laboratory study of the effect of the branching angle and the branching channel slope on flow." Al-Rafadain Engineering Journal, Vol. 20, No. 5, pp. 33-41.
Bulle, H. (1926). Untersuchungen uber die Geschiebeableitung bei der Spaltung von Wasserlaufen. VDI Verlag, Berlin (in German).
De Heer, A., and Mosselman, E. (2004). "Flow structure and bedload distribution at alluvial diversions." River Flow 2004, Second International Conference on Fluvial Hydraulics, Napoli, Italy, pp. 801-806.
Hardy, R.J., Lane, S.N., Ferguson, R.I., and Parsons, D.R. (2003). "Assessing the credibility of a series of computational fluid dynamic simulations of open channel flow." Hydrological Processes, Vol. 17, No. 8, pp.1539-1560.
Hsu, C.C., Tang, C.J., Lee, W.J. and Shieh, M.Y. (2002). "Subcritical $90^{\circ}$ equal-width open-channel dividing flow." Journal of Hydraulic Engineering, ASCE, Vol. 128, No. 7, pp. 716-720.
EDF-R&D (2014). "TELEMAC-2D software user manual release 7.0."
El Kadi Abderrezzak, K., and Paquier, A. (2009). "Discussion of "Numerical and experimental study of dividing open-channel flows" by AS ramamurthy, junying qu, and diep vo." Journal of Hydraulic Engineering, ASCE, Vol. 135, No. 12, pp. 1111-1112.
Ghostine, R., Vazquez, J., Terfous, A., Riviere, N., Ghenaim, A., and Mose, R. (2013). "A comparative study of 1D and 2D approaches for simulating flows at right angled dividing junctions." Applied Mathematics and Computation, Vol. 219, No. 10, pp. 5070-5082.
Jung, D.J., Jang, C.L., and Jung, K.S. (2019). "Numerical analysis of flow characteristics at the bifurcation channel by changing of discharge ratio using TELEMAC-2D." Journal of Korea Water Resources Association, Vol. 52, No. 1, pp. 1-10.
Kasthuri, B. and Pundarikanthan, N.V. (1987). "Discussion on Separation Zone at Open Channel Junction." Journal of Hydraulic Engineering, ASCE, Vol. 113, No. 4, pp. 543-548.
Keshavarzi, A., and Habibi, L. (2005). "Optimizing water intake angle by flow separation analysis." Irrigation and Drainage, Vol. 54, No. 5, pp. 543-552.
Kleinhans, M.G., Ferguson, R.I., Lane, S.N., and Hardy, R.J. (2013). "Splitting rivers at their seams: bifurcations and avulsion." Earth Surface Processes and Landforms, Vol. 38, No. 1, pp. 47-61.
Lai, Y.G. (2010). "Two-dimensional depth-averaged flow modeling with an unstructured hybrid mesh." Journal of Hydraulic Engineering, ASCE, Vol. 136, No. 1, pp. 12-23.
Lai, Y.G. and Wu, K. (2019). "A three-dimensional flow and sediment transport model for free-surface open channel flows on unstructured flexible meshes." Fluids, Vol. 4, No. 1, p. 18.
Law, S.W. and Reynolds, A.J. (1966). "Dividing Flow in Open Channel." Journal of Hydraulic Division, Vol. 92, No. 2, pp. 207-231.
Lila, H. and AliReza, K. (2006). "Bed scouring and fish habitats at dam-less river water intake." Journal of Fisheries and Aquatic Sciences, Vol. 1, No. 1, pp. 32-53.
Ministry of Land, Infrastructure and Transport (MOLIT) (2016). Third modification plan of water vision 2020. No. 11-1613000-001716-13, pp. 59-96.
Neary, V.S. and Odgaard, A. (1993). "Three-dimensional flow structure at open-channel diversions." Journal of Hydraulic Engineering, ASCE, Vol. 119, No. 11, pp. 1223-1230.
Pirestani, M.R., Vosoghifar, H.R., and Jazayeri, P. (2011). "Evaluation of optimum performance of lateral intakes." World Academy of Science, Engineering and Technology, Vol. 5, No. 8, pp. 301-305.
Ramamurthy, A., Qu, J., and Vo, D. (2007). "Numerical and experimental study of dividing open-channel flows." Journal of Hydraulic Engineering, ASCE, Vol. 133, No. 10, pp. 1135-1144.
Rao, N.L. and Sridharan, K. (1967). "Division of flow in open channels." Water and Energy International, Vol. 24, No. 4, pp. 393-407.
Schielen, R.M.J., Havinga, H., and Lemans, M. (2008). "Dynamic control of the discharge distributions of the Rhine river in the Netherlands." Proceedings of River flow 2008: Forth International Conference on Fluvial Hydraulics, Izmir, Turkey, pp. 395-404.
Shettar, A.S., and Murthy, K.K. (1996). "A numerical study of division of flow in open channels." Journal of Hydraulic Research, Vol. 34, No. 5, pp. 651-675.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.