최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산업융합학회 논문집 = Journal of the Korean Society of Industry Convergence, v.23 no.5, 2020년, pp.835 - 842
오재원 (선박해양플랜트연구소 해양플랜트산업지원센터) , 민천홍 (선박해양플랜트연구소 해양플랜트산업지원센터) , 성기영 (선박해양플랜트연구소 해양플랜트산업지원센터) , 강관구 (선박해양플랜트연구소 해양플랜트산업지원센터) , 노현정 (선박해양플랜트연구소 해양플랜트산업지원센터) , 김태욱 (선박해양플랜트연구소 해양플랜트산업지원센터) , 조수길 (선박해양플랜트연구소 해양에너지연구본부)
This paper considers a method of reproducing abnormal and fault operation for smart monitoring of thrust bearing used in wave power generation system. In order to develop smart monitoring technology, abnormal and failure data of actual equipment are required. However, it is impossible to artificiall...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
I. H. Cho, "Latching Control Technology for Improvement of Extracted Power from Wave Energy Converter", Journal of the Korean Society for Marine Environment and Energy, vol. 18, no. 4, pp. 282-290, (2015).
B. Anela, H. Jan, and R. Finn, "Evaluation of damping estimates by automated Operational Modal Analysis for offshore wind turbine tower vibrations", Renewable Energy, vol. 116, pp. 153-163, (2018).
M. Kamarlouei, J. F. Gaspar, M. Calvario, T. S. Hallak, M. J. G. C. Mendes, F. Thieba ut, and C. Guedes Soares, " Experimental analysis of wave energy converters concentrically attached on a floating offshore platform", Renewable Energy, vol. 152, pp. 1171-1185, (2020).
C. Roh, K. H. K im, J. H. Kim, and K. Hong, "A Comparison of PWM methods for Power Converter of OWC Wave Power Generation System", Journal of the Korean Society for Marine Environment and Energy, vol. 22, no. 2, pp. 84-94, (2019).
K. Gurumoorthy, and A. Ghosh, "Failure investigation of a taper roller bearing: A case study", Case Studies in Engineering Failure Analysis, vol. 1, pp. 110-114, (2013).
M. Y. Toumi, S. Murer, F. Bogard, and F. Bolaers, "Numerical simulation and experimental comparison of flaw evolution on a bearing raceway: Case of thrust ball bearing", Journal of Computational Design and Engineering, vol. 5, pp. 427-434, (2018).
J. Zhang, H. Sun, L. Hu, and H. He, "Fault Diagnosis and Failure Prediction by Thrust Load Analysis for a Turbocharger Thrust Bearing", Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, Glasgow, UK, (2010).
J. Chebil, M. Hrairi, and N. Abushikhah, "Signal Analysis of Vibration Measurements for Condition Monitoring of Bearing", Australian Journal of Basic and Applied Sciences, vol. 5, no. 1, pp. 70-78, (2011).
A. Rezaei, "Fault Detection and Diagnosis on the Rolling Element Bearing", Garlenton University, (2007)
F. G. Guzman, M. Oezel, G. Jacobs, G. Burghardt, C. Broeckmann, and T. Janizky, "Reproduction of white etching cracks under rolling contact loading on thrust bearing and two-disck test rigs", Wear, vol. 390, pp. 23-32, (2017).
J. J. P. Loya, C. Johan, D. Abrahamsson, F. Evestedt, and U. Lundin, "Performance Tests of a Permanent Magnet Thrust Bearing for a Hydropower Synchronous Generator Test-Rig", ACES JOURNAL, vol. 32, no. 8, pp. 704-711, (2017).
K. Sandvik, A. Lehtovaara, E. Makkonen, M. Kallio, K. Kuvaja, V. T. Kuokkala, "Development of a Test Device for the Evaluation of Journal Bearings", Finnish Journal of Tribology, vol. 31, pp. 12-21. (2012).
J. M. Yoo, D. G. Ahn, and J. S. Jang, "Review of FMEA", Journal of the applied reliablility, vol. 19, no. 4, pp. 318-333, (2019)
S. J. Park, W. H. Son, K. C. Lee, and H. S. Mok, "Performance Improvement through the Remanufacturing Process Analysis of Industrial Hydraulic Pumps", Journal of the Korea Society of Industry Convergence, vol. 23, no. 2, pp. 181-189, (2020).
BARDEN PRECISION BEARINGS, "BEARING FAILURE: CAUSES AND CURES", USA
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.