최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기디지털융복합연구 = Journal of digital convergence, v.18 no.10, 2020년, pp.219 - 224
김종길 (청운대학교 토목환경공학과) , 이용주 (주식회사 준건설)
The purpose of this study is to develop a device to replace the pre-boring method, which is generally constructed, to prevent pile damage caused by tension cracks that reason from tension waves generated during PHC pile construction on soft ground. Tension cracks are caused by tension waves from the...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
연약지반에서 PHC 파일이 시공 시 인장균열 및 손상이 발생하는 이유는? | 일반적으로 연약지반에서 PHC(Pretensioned Spun High Strengthed Concrete) 파일은 시공시 햄머 항타에 의해 발생하는 응력이 연약층 통과시 파일 선단에서 압축파가 인장파로 변환되면서 인장균열 및 손상이 발생한다. 따라서 파일 손상을 방지하기 위하여 선굴착 후 말뚝을 시공하는 매입공법을 대부분 적용하고 있다. | |
연약 지반상에서 PHC 파일 시공을 위한 대형 항타 장비는 어디에 의존하는가? | 연약 지반상에서 PHC 파일 시공을 위하여 선굴착 후 매입공법 시공 장비는 굴착 오거 및 대형 해머를 장착하므로 대형 항타 장비를 이용한다. 대형 항타 장비의 경우 대부분 해외에서 수입한 장비를 사용하고 있다. 항타 장비의 항타력을 증대시킬 경우 장비를 소형화할 수 있어 국산화가 가능하다[2, 3]. | |
PHC 파일 손상을 방지하기 위해 어떤 공법을 적용하는가? | 일반적으로 연약지반에서 PHC(Pretensioned Spun High Strengthed Concrete) 파일은 시공시 햄머 항타에 의해 발생하는 응력이 연약층 통과시 파일 선단에서 압축파가 인장파로 변환되면서 인장균열 및 손상이 발생한다. 따라서 파일 손상을 방지하기 위하여 선굴착 후 말뚝을 시공하는 매입공법을 대부분 적용하고 있다. 국내의 경우, 대부분 유압햄머(5~10Ton)로 항타장비가 제한적이나, 해외설계 및 시공사례를 보면 항타장비조합의 다양화로 대심도 연약지반에서도 항타에 의한 시공이 가능한 것으로 조사되었다[1]. |
N. H. Kim. (2014). Analysis of drivability and constructability for Spun Pile into special ground conditions. Youshin Technology Newsletter, 80-89.
G. S. Woo, (2016). Evaluation of Allowable Bearing Capacity of 600mm Diameter Preboring PHC Piles Using Dynamic Load Test. Journal of The Korea Geotechnical Society Vol32,No11, 61-72
K. J. Cho. (2010). Evaluation of the tip resistance of prebored PHC pile on weathered rock. KSCE 2010. 990-993
D. G. Kim. (2017). High strength and ultra high strength PHC pile test case with high design load. KSCE 2017. 55-56
E. A. Hwang. (2017). Suggestion of New Pre-drilling Method for Soft Soils using Multiple Auger Boring Machine Equipped with Wire Ropes. KSCE Vol65No09. 41-45
S. S. Jeong. (2015) Analysis of Load Sharing Ratio for PHC Piled-raft Foundation. KSCE 81-82
H. K. Choi. (2015). A study on the Installation of the Point Foundation as the Substitution method of the soft ground. KSCE 45-46
C. H. Cho. (2004). PHC PILE cracking related technology cases in soft ground. Samsung E&C Technical Information, 15-17.
J. Y. Ko. (2015). Proposed Bearing Capacity for Open-Ended Piles with Soil Plugging. KSCE 47-48
W. P. Hong. (1987). Deep foundation of soft ground. KSCE Vol35.No6. 11-14
K. W. Lee. (1996). Problems and countermeasures in design and construction of ready-made concrete pile foundation. Construction technology Ssangyong.
W. J Lee. (2015). The proposal to Design PHC Piles Properly when used for Civil Engineering Structures. KSCE 163(11), 52-60
J. M. Goo. (2008) Micropiling: Case History and the Improvement of Design Method. KSCE 865-868
Y. H. Lee, (2007). Example of construction method for applying PHC file in soft ground. Geotechnical Engineering 23(7), 9-21
B. K. Kim. (2016) Preliminary study on the Underwater Noise Mitigation Device under Offshore Pile Driving. KSCE. 78-79
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.