[논문]The use of river sand for fine aggregate in UHPC and the effect of its particle size

Kang, Su-Tae

doi:10.12989/acc.2020.10.5.431

[국내논문] The use of river sand for fine aggregate in UHPC and the effect of its particle size

Advances in concrete construction, v.10 no.5, 2020년, pp.431 - 441

Kang, Su-Tae (Department of Civil Engineering, Daegu University)

Abstract ▼ AI-Helper

For the purpose of improving the properties of UHPC as well as the economic efficiency in production of the material, Availability of river sands as fine aggregate instead of micro silica sand were investigated. Four different sizes of river sands were considered. Using river sand instead of micro silica sand increased the flowability, and decreased the yield stress and plastic viscosity in rheological properties, and the effect was higher with larger particle size of river sand. It was demonstrated by analyses based on the packing density. In the results of compressive strength and elastic modulus, even though river sand was not as good as micro silica sand, it could provide high strength of over 170 MPa and elastic modulus greater than 40 GPa. The difference in compressive strength depending on the size of river sand was explained with the concept of maximum paste thickness based on the packing density of aggregate. The flexural performance with river sand also presented relatively lower resistance than micro silica sand, and the reduction was greater with larger particle size of river sand. The flexural performance was proven to be also influenced by the difference in the fiber orientation distribution due to the size of river sand.

Keyword

참고문헌 (45)

Abbas, S., Nehdi, M.L. and Saleem, M.A. (2016), "Ultra-high performance concrete: mechanical performance, durability, sustainability and implementation challenges", Int. J. Concrete Struct. Mater., 10, 271-295. https://doi.org/10.1007/s40069-016-0157-4.
Ahman, S., Hakeem, I. and Maslehuddin, M. (2014), "Development of UHPC mixtures utilizing natural and industrial waste materials as partial replacements of silica fume and sand", Sci. World J., 2014, 713531. https://doi.org/10.1155/2014/713531.
ASTM C1437-07 (2007), Standard Test Method for Flow of Hydraulic Cement Mortar.
Bentz, D.P., Ferraris, C.F. and Galler, M.A. (2012), "Influence of particle size distribution on yield stress and viscosity of cement-fly ash paste", Cement Concrete Res., 42(2), 404-409. https://doi.org/10.1016/j.cemconres.2011.11.006.

상세보기
Bonneau, O., Lachemi, M. and Dallaire, E., Dugat, J. and Aitcin, P.C. (1997), "Mechanical properties and durability of two industrial reactive powder concretes", ACI Mater. J., 94(4), 286-290. https://doi.org/10.14359/310.

상세보기
De Larrard, F. (1989), "Ultrafine particles for the making of very high-strength concretes", Cement Concrete Res., 19, 161-172. https://doi.org/10.1016/0008-8846(89)90079-3.
De Larrard, F. and Sedran, T. (1994), "Optimization of ultra-high-performance concrete by the use of a packing model", Cement Concrete Res., 24(6), 997-1009. https://doi.org/10.1016/0008-8846(94)90022-1.

상세보기
De Larrard, F. and Sedran, T. (2002), "Mixture-proportioning of high-performance concrete", Cement Concrete Res., 32, 1699-1704. https://doi.org/10.1016/S0008-8846(02)00861-X.
De Larrard, F. and Tondat, P. (1993), "Sur la contribution de la topologie du squelette granulaire a la resistance en compression du beton", Mater. Struct., 26, 505-516. https://doi.org/10.1007/BF02472861.
Dils, J., Boel, V. and De Schutter, G. (2013), "Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC", Constr. Build. Mater., 41, 455-463. https://doi.org/10.1016/j.conbuildmat.2012.12.050.

상세보기
Ferrara, L., di Prisco, M. and Lamperti, M.G.L. (2010), "Identification of the stress-crack opening behavior of HPFRCC: The role of flow-induced fiber orientation", Proceedings of FraMCoS-7, 3, Jeju, Korea.
Ferraris, C.F. and De Larrard, F. (1998), "Testing and modelling of fresh concrete technology", NISTIR 6094, National Institute of Standards and Technology.
Graybeal, B. and Davis, M. (2008), "Cylinder or cube: Strength testing of 80 to 200 MPa (116 to 29 ksi) ultra-high-performance-fiber-reinforced concrete", ACI Mater. J., 105, 603-609. https://doi.org/10.14359/20202.

상세보기
Graybeal, B. and Tanesi, J. (2007), "Durability of an ultrahigh-performance concrete", J. Mater. Civil Eng., 19(10), 848-854. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:10(848).

상세보기
Hoornahad, H. and Koenders, E.A.B. (2013), "Effect of the mix composition on rheological Behavior of a fresh granular-cement paste material", Proceedings of the 7th RILEM International Conference on Self-Compacting Concrete and of the 1st RILEM International Conference on Rheology and Processing of Construction Materials, Paris, France.
Huang, H., Gao, X., Li, L. and Wang, H. (2018), "Improvement effect of steel fiber orientation control on mechanical performance of UHPC", Constr. Build. Mater., 188, 709-721. https://doi.org/10.1016/j.conbuildmat.2018.08.146.

상세보기
Justnes, H. and Vikan, H. (2005), "Viscosity of cement slurries as a function of solids content", Ann. Trans. Nordic Rheol. Soc., 13, 75-82.
Kang, S.T., Choi, J.I., Koh, K.T., Lee, K.S. and Lee, B.Y. (2016), "Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete", Compos. Struct., 145, 37-42. https://doi.org/10.1016/j.compstruct.2016.02.075.

상세보기
Kang, S.T. and Kim, J.K. (2010), "The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)", Cement Concrete Res., 41, 1001-1014. https://doi.org/10.1016/j.cemconres.2011.05.009.
Kang, S.T., Lee, Y., Park, Y.D. and Kim, J.K. (2010), "Tensile fracture properties of an ultra high performance fiber reinforced concrete (UHPFRC) with steel fiber", Compos. Struct., 92(1), 61-71. https://doi.org/10.1016/j.compstruct.2009.06.012.

상세보기
Kobayashi, K. (1981), Fiber Reinforced Concrete, Ohmsha, Tokyo, Japan.
Kriegar, I.M. and Dougherty, T.J. (1959), "A mechanism for non-Newtonian flow in suspensions of rigid spheres", J. Rheol., 3, 137-152. https://doi.org/10.1122/1.548848.
Lee, B.Y., Kim, J.K. and Kim, Y.Y. (2009), "Quantitative evaluation technique of polyvinyl alcohol (PVA) fiber dispersion in engineered cementitious composites", Cement Concrete Compos., 31(6), 408-417. https://doi.org/10.1016/j.cemconcomp.2009.04.002.

상세보기
Li, Y., Tan, K.H. and Yang, E.H. (2018), "Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature", Constr. Build. Mater., 169, 629-637. https://doi.org/10.1016/j.conbuildmat.2018.01.105

상세보기
Markovic, I. (2006), "High-performance hybrid-fiber concrete-development and utilization", Ph.D. Dissertation, Delft University of Technology, Netherland.
Mooney, M. (1951), "The viscosity of concentrated suspensions of spherical particles", J. Colloid Sci., 6(2), 162-170. https://doi.org/10.1016/0095-8522(51)90036-0.

상세보기
Mosaberpanah, M.A. and Eren, O. (2017), "Effect of quartz powder, quartz sand and water curing regimes on mechanical properties on UHPC using response surface modelling", Adv. Concrete Constr., 5(5), 481-492. https://doi.org/10.12989/acc.2017.5.5.481.

상세보기
Nuaklong, R., Chittaurak, J., Jongvivatsakul, P., Pansuk, W., Lenwari, A. and Likitlersuang, S. (2020), "Effect of hybrid polypropylene-steel fibres on strength characteristics of UHPFRC", Adv. Concrete Constr., 10(1), 1-11, https://doi.org/10.12989/acc.2020.10.1.001.

상세보기
Qi, J., Wang, J. and Feng, Y. (2019), "Shear performance of an innovative UHPFRC deck of composite bridge with coarse aggregate", Adv. Concrete Constr., 7(4), 219-229. https://doi.org/10.12989/acc.2019.7.4.219.

상세보기
Richard, P. and Cheyrezy, M. (1994), "Reactive powder concretes with high ductility and 200-800 Mpa compressive strength", ACI Mater. J., 144(3), 507-518. https://doi.org/10.14359/4536.
Richard, P. and Cheyrezy, M. (1995), "Composition of reactive powder concrete", Cement Concrete Res., 25(7), 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2.

상세보기
Romualdi, J.P. and Mandel, J.A. (1964), "Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement", J. Am. Concrete Inst., 61, 657-672. https://doi.org/ 10.14359/7801.
Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8(1), 21-31. https://doi.org/10.12989/acc.2019.8.1.021.

상세보기
Soroushian, P. and Lee, C.D. (1990), "Distribution and orientation of fibers in steel fiber reinforced concrete", ACI Mater. J., 87, 433-439. https://doi.org/10.14359/1803.
Stahli, P., Custer, R. and van Mier, J.G.M. (2008), "On flow properties, fibre distribution, fibre orientation and flexural behavior of FRC", Mater. Struct., 41, 189-196. https://doi.org/10.1617/s11527-007-9229-x.
Stovall, T., De Larrard, F. and Buil, M. (1986), "Linear packing density model of grain mixtures", Powder Technol., 48(1), 1-12. https://doi.org/10.1016/0032-5910(86)80058-4.

상세보기
Struble, L. and Sun, G.K. (1995), "Viscosity of portland cement paste as a function of concentration", Adv. Cement Bas. Mater., 2, 62-69. https://doi.org/10.1016/1065-7355(95)90026-8.
Teng, J.G., Xiang, Y., Yu, T. and Fang, Z. (2019), "Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete", Adv. Struct. Eng., 22(4), 1-21. https://doi.org/10.1177/1369433219858291.
Vitek, J.L., Coufal, R. and Citek, D. (2013), "UHPC-Development and testing on structural elements", Procedia Eng., 65, 218-223. https://doi.org/10.1016/j.proeng.2013.09.033.
Walsh, S.D.C. and Saar, M.O. (2008), "Numerical models of stiffness and yield stress growth in crystal-melt suspensions", Earth Planet. Sci. Lett., 267, 32-44. https://doi.org/10.1016/j.epsl.2007.11.028.

상세보기
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang Z. and Fang, Z. (2015), "A review on ultra high performance concrete: Part II. hydration, microstructure and properties", Constr. Build. Mater., 96, 368-377. https://doi.org/10.1016/j.conbuildmat.2015.08.095.

상세보기
Wille, K. and Parra-Montesinos, G.J. (2012), "Effect of beam size, casting method, and support conditions on flexural behavior of ultra-high-performance fiber-reinforced concrete", ACI Mater. J., 109, 379-388. https://doi.org/10.14359/51683829.

상세보기
Wille, K., Tue, N.V. and Parra-Montesinos, G.J. (2014), "Fiber distribution and orientation in UHP-FRC beams and their effect on backward analysis", Mater. Struct., 47, 1825-1838. https://doi.org/10.1617/s11527-013-0153-y.
Yoo, D.Y. and Banthia, N. (2016), "Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review", Cement Concrete Compos., 73, 267-280. https://doi.org/10.1016/j.cemconcomp.2016.08.001.
Yoo, D.Y., Kang, S.T. and Yoon, Y.S. (2014), "Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC", Constr. Build. Mater., 64, 67-81. https://doi.org/10.1016/j.conbuildmat.2014.04.007.

상세보기

활용도 분석정보

상세보기

다운로드

내보내기

활용도 Top5 논문

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증