$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

[국내논문] The use of river sand for fine aggregate in UHPC and the effect of its particle size

Advances in concrete construction, v.10 no.5, 2020년, pp.431 - 441  

Kang, Su-Tae (Department of Civil Engineering, Daegu University)

Abstract AI-Helper 아이콘AI-Helper

For the purpose of improving the properties of UHPC as well as the economic efficiency in production of the material, Availability of river sands as fine aggregate instead of micro silica sand were investigated. Four different sizes of river sands were considered. Using river sand instead of micro s...

주제어

참고문헌 (45)

  1. Abbas, S., Nehdi, M.L. and Saleem, M.A. (2016), "Ultra-high performance concrete: mechanical performance, durability, sustainability and implementation challenges", Int. J. Concrete Struct. Mater., 10, 271-295. https://doi.org/10.1007/s40069-016-0157-4. 

  2. Ahman, S., Hakeem, I. and Maslehuddin, M. (2014), "Development of UHPC mixtures utilizing natural and industrial waste materials as partial replacements of silica fume and sand", Sci. World J., 2014, 713531. https://doi.org/10.1155/2014/713531. 

  3. ASTM C1437-07 (2007), Standard Test Method for Flow of Hydraulic Cement Mortar. 

  4. Bentz, D.P., Ferraris, C.F. and Galler, M.A. (2012), "Influence of particle size distribution on yield stress and viscosity of cement-fly ash paste", Cement Concrete Res., 42(2), 404-409. https://doi.org/10.1016/j.cemconres.2011.11.006. 

  5. Bonneau, O., Lachemi, M. and Dallaire, E., Dugat, J. and Aitcin, P.C. (1997), "Mechanical properties and durability of two industrial reactive powder concretes", ACI Mater. J., 94(4), 286-290. https://doi.org/10.14359/310. 

  6. De Larrard, F. (1989), "Ultrafine particles for the making of very high-strength concretes", Cement Concrete Res., 19, 161-172. https://doi.org/10.1016/0008-8846(89)90079-3. 

  7. De Larrard, F. and Sedran, T. (1994), "Optimization of ultra-high-performance concrete by the use of a packing model", Cement Concrete Res., 24(6), 997-1009. https://doi.org/10.1016/0008-8846(94)90022-1. 

  8. De Larrard, F. and Sedran, T. (2002), "Mixture-proportioning of high-performance concrete", Cement Concrete Res., 32, 1699-1704. https://doi.org/10.1016/S0008-8846(02)00861-X. 

  9. De Larrard, F. and Tondat, P. (1993), "Sur la contribution de la topologie du squelette granulaire a la resistance en compression du beton", Mater. Struct., 26, 505-516. https://doi.org/10.1007/BF02472861. 

  10. Dils, J., Boel, V. and De Schutter, G. (2013), "Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC", Constr. Build. Mater., 41, 455-463. https://doi.org/10.1016/j.conbuildmat.2012.12.050. 

  11. Ferrara, L., di Prisco, M. and Lamperti, M.G.L. (2010), "Identification of the stress-crack opening behavior of HPFRCC: The role of flow-induced fiber orientation", Proceedings of FraMCoS-7, 3, Jeju, Korea. 

  12. Ferraris, C.F. and De Larrard, F. (1998), "Testing and modelling of fresh concrete technology", NISTIR 6094, National Institute of Standards and Technology. 

  13. Graybeal, B. and Davis, M. (2008), "Cylinder or cube: Strength testing of 80 to 200 MPa (116 to 29 ksi) ultra-high-performance-fiber-reinforced concrete", ACI Mater. J., 105, 603-609. https://doi.org/10.14359/20202. 

  14. Graybeal, B. and Tanesi, J. (2007), "Durability of an ultrahigh-performance concrete", J. Mater. Civil Eng., 19(10), 848-854. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:10(848). 

  15. Hoornahad, H. and Koenders, E.A.B. (2013), "Effect of the mix composition on rheological Behavior of a fresh granular-cement paste material", Proceedings of the 7th RILEM International Conference on Self-Compacting Concrete and of the 1st RILEM International Conference on Rheology and Processing of Construction Materials, Paris, France. 

  16. Huang, H., Gao, X., Li, L. and Wang, H. (2018), "Improvement effect of steel fiber orientation control on mechanical performance of UHPC", Constr. Build. Mater., 188, 709-721. https://doi.org/10.1016/j.conbuildmat.2018.08.146. 

  17. Justnes, H. and Vikan, H. (2005), "Viscosity of cement slurries as a function of solids content", Ann. Trans. Nordic Rheol. Soc., 13, 75-82. 

  18. Kang, S.T., Choi, J.I., Koh, K.T., Lee, K.S. and Lee, B.Y. (2016), "Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete", Compos. Struct., 145, 37-42. https://doi.org/10.1016/j.compstruct.2016.02.075. 

  19. Kang, S.T. and Kim, J.K. (2010), "The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)", Cement Concrete Res., 41, 1001-1014. https://doi.org/10.1016/j.cemconres.2011.05.009. 

  20. Kang, S.T., Lee, Y., Park, Y.D. and Kim, J.K. (2010), "Tensile fracture properties of an ultra high performance fiber reinforced concrete (UHPFRC) with steel fiber", Compos. Struct., 92(1), 61-71. https://doi.org/10.1016/j.compstruct.2009.06.012. 

  21. Kobayashi, K. (1981), Fiber Reinforced Concrete, Ohmsha, Tokyo, Japan. 

  22. Kriegar, I.M. and Dougherty, T.J. (1959), "A mechanism for non-Newtonian flow in suspensions of rigid spheres", J. Rheol., 3, 137-152. https://doi.org/10.1122/1.548848. 

  23. Lee, B.Y., Kim, J.K. and Kim, Y.Y. (2009), "Quantitative evaluation technique of polyvinyl alcohol (PVA) fiber dispersion in engineered cementitious composites", Cement Concrete Compos., 31(6), 408-417. https://doi.org/10.1016/j.cemconcomp.2009.04.002. 

  24. Li, Y., Tan, K.H. and Yang, E.H. (2018), "Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature", Constr. Build. Mater., 169, 629-637. https://doi.org/10.1016/j.conbuildmat.2018.01.105 

  25. Markovic, I. (2006), "High-performance hybrid-fiber concrete-development and utilization", Ph.D. Dissertation, Delft University of Technology, Netherland. 

  26. Mooney, M. (1951), "The viscosity of concentrated suspensions of spherical particles", J. Colloid Sci., 6(2), 162-170. https://doi.org/10.1016/0095-8522(51)90036-0. 

  27. Mosaberpanah, M.A. and Eren, O. (2017), "Effect of quartz powder, quartz sand and water curing regimes on mechanical properties on UHPC using response surface modelling", Adv. Concrete Constr., 5(5), 481-492. https://doi.org/10.12989/acc.2017.5.5.481. 

  28. Nuaklong, R., Chittaurak, J., Jongvivatsakul, P., Pansuk, W., Lenwari, A. and Likitlersuang, S. (2020), "Effect of hybrid polypropylene-steel fibres on strength characteristics of UHPFRC", Adv. Concrete Constr., 10(1), 1-11, https://doi.org/10.12989/acc.2020.10.1.001. 

  29. Qi, J., Wang, J. and Feng, Y. (2019), "Shear performance of an innovative UHPFRC deck of composite bridge with coarse aggregate", Adv. Concrete Constr., 7(4), 219-229. https://doi.org/10.12989/acc.2019.7.4.219. 

  30. Richard, P. and Cheyrezy, M. (1994), "Reactive powder concretes with high ductility and 200-800 Mpa compressive strength", ACI Mater. J., 144(3), 507-518. https://doi.org/10.14359/4536. 

  31. Richard, P. and Cheyrezy, M. (1995), "Composition of reactive powder concrete", Cement Concrete Res., 25(7), 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2. 

  32. Romualdi, J.P. and Mandel, J.A. (1964), "Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement", J. Am. Concrete Inst., 61, 657-672. https://doi.org/ 10.14359/7801. 

  33. Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8(1), 21-31. https://doi.org/10.12989/acc.2019.8.1.021. 

  34. Soroushian, P. and Lee, C.D. (1990), "Distribution and orientation of fibers in steel fiber reinforced concrete", ACI Mater. J., 87, 433-439. https://doi.org/10.14359/1803. 

  35. Stahli, P., Custer, R. and van Mier, J.G.M. (2008), "On flow properties, fibre distribution, fibre orientation and flexural behavior of FRC", Mater. Struct., 41, 189-196. https://doi.org/10.1617/s11527-007-9229-x. 

  36. Stovall, T., De Larrard, F. and Buil, M. (1986), "Linear packing density model of grain mixtures", Powder Technol., 48(1), 1-12. https://doi.org/10.1016/0032-5910(86)80058-4. 

  37. Struble, L. and Sun, G.K. (1995), "Viscosity of portland cement paste as a function of concentration", Adv. Cement Bas. Mater., 2, 62-69. https://doi.org/10.1016/1065-7355(95)90026-8. 

  38. Teng, J.G., Xiang, Y., Yu, T. and Fang, Z. (2019), "Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete", Adv. Struct. Eng., 22(4), 1-21. https://doi.org/10.1177/1369433219858291. 

  39. Vitek, J.L., Coufal, R. and Citek, D. (2013), "UHPC-Development and testing on structural elements", Procedia Eng., 65, 218-223. https://doi.org/10.1016/j.proeng.2013.09.033. 

  40. Walsh, S.D.C. and Saar, M.O. (2008), "Numerical models of stiffness and yield stress growth in crystal-melt suspensions", Earth Planet. Sci. Lett., 267, 32-44. https://doi.org/10.1016/j.epsl.2007.11.028. 

  41. Wang, D., Shi, C., Wu, Z., Xiao, J., Huang Z. and Fang, Z. (2015), "A review on ultra high performance concrete: Part II. hydration, microstructure and properties", Constr. Build. Mater., 96, 368-377. https://doi.org/10.1016/j.conbuildmat.2015.08.095. 

  42. Wille, K. and Parra-Montesinos, G.J. (2012), "Effect of beam size, casting method, and support conditions on flexural behavior of ultra-high-performance fiber-reinforced concrete", ACI Mater. J., 109, 379-388. https://doi.org/10.14359/51683829. 

  43. Wille, K., Tue, N.V. and Parra-Montesinos, G.J. (2014), "Fiber distribution and orientation in UHP-FRC beams and their effect on backward analysis", Mater. Struct., 47, 1825-1838. https://doi.org/10.1617/s11527-013-0153-y. 

  44. Yoo, D.Y. and Banthia, N. (2016), "Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review", Cement Concrete Compos., 73, 267-280. https://doi.org/10.1016/j.cemconcomp.2016.08.001. 

  45. Yoo, D.Y., Kang, S.T. and Yoon, Y.S. (2014), "Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC", Constr. Build. Mater., 64, 67-81. https://doi.org/10.1016/j.conbuildmat.2014.04.007. 

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로