최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.9, 2020년, pp.1 - 8
박종천 (금오공과대학교 기계공학과) , 유만준 (금오공과대학교 대학원 기계공학과)
In this study, the optimal design of the multi-cavity mold layout and packing pressure for the automobile TCU connector cover is determined based on the injection molding analysis and the desirability function method for multi-characteristic optimization. The design characteristics to be optimized a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Yao, D., "Direct Search-Based Automatic Minimization of Warpage And Weldlines in Injection Molded Parts," A Thesis for a Master, University of Massachusetts, pp. 1-135, 1998.
Liao, S. J., Chang, D. Y., Chen, H. J., Tsou, L. S., Ho, J. R., Yau, H. T. and Hsieh, W. H., “Optimal process conditions of shrinkage and warpage of thin-wall parts,” Polymer Engineering and Science, Vol. 44, No. 5, pp. 917-928, 2004.
Erzurumlu, T. and Ozcelik, B., "Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method," Materials and Design, Vol. 27, pp. 853-861, 2006.
Zhou, J. and Turng, L.S., “Adaptive Multiobjective Optimization of Process Conditions for Injection Molding Using a Gaussian Process Approach,” Advances in Polymer Technology, Vol. 26, No. 2, pp. 71-85, 2007.
Mehat, N. M. and Kamaruddin, S., “Multi- Response Optimization of Injection Moulding Processing Parameters Using the Taguchi Method,” Polymer-Plastics Technology and Engineering, Vol. 50, No. 15, pp. 1519-1526, 2011.
Azaman, M. D., Wang, X., Zhao, G. and Wang, G., "Research on the Reduction of Sink Mark and Warpage of the Molded Part in Rapid Heat Cycle Molding Process," Materials and Design, Vol. 47, pp. 779-792, 2013.
Derringer, G. and Suich, R., “Simultaneous Optimization of Several Response Variables,” Journal of Quality Technology, Vol. 12, No. 4, pp. 214-219, 1980.
Derringer, G., “A Balancing Act: Optimizing a Product's Properties,” Quality Progress, Vol. 27, No. 6, pp. 51-58, 1994.
Del Castillo, E., Montgomery, D. C., and McCarville, D. R., "Modified Desirability Function for Multiple Response Optimization," Journal of Quality Technology, Vol. 28, No. 3, pp. 337-336, 1996.
Malloy, R. A., Plastic Part Design for Injection Molding, Hanser/Gardner Publishers Inc., Cincinnati, pp. 75-84, 1994.
Shin, N. H., Oh, H. S. and Kang, S. G., The Optimization of Injection Molding Process by CAE, Daekwangseorim, Seoul, pp. 327-422, 2010.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.