최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.7, 2020년, pp.16 - 21
최계광 (공주대학교 금형설계공학과) , 조재웅 (공주대학교 기계자동차공학부)
The structural analyses were conducted with three models of pinion gears connected to the rack gear which is driven by the steering axle at an automobile. Three models 1, 2 and 3 are designed as the different pinion gears due to the vehicle type. The lower the value of maximum stress, the better the...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, J. Y., You, K. J., Gao, J. C. and Jung, Y. S., "A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017.
Jung, Y. S., Gao, J. C., Kim, J. Y. and You, G. J., "A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017.
Choo, S. W. and Jeong, S. H., "Structural and Dynamic Characteristic Analysis of a Feeder for an Automatic Assembly System of an LED Convergent Lighting Module," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 124-133, 2017.
Wang, J. H. and Kwon, Y. C., "Structural Analysis of Center Pillar according to Applied Load," Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018.
Wang, J. H. and Kwon, Y. C., "Structural Analysis according to Load of Height-adjustable Table," Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 3, pp. 273-278, 2018.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.