최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국트라이볼로지학회지 = Tribology and lubricants, v.36 no.5, 2020년, pp.267 - 273
홍성호 (동국대학교 창의융합공학부 기계시스템공학전공) , 우흥식 (동국대학교 창의융합공학부 안전공학전공)
This study experimentally investigates hydrophobic surfaces fabricated via additive manufacturing. Additive manufacturing, commonly known as 3D printing, is the process of joining materials to fabricate parts from 3D model data, usually in a layer-upon-layer manner. Digital light processing is used ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
적층 제조조의 장점은? | 그 외에도 적층하여 만드는 적층 제조(AM, additive manufacturing) 기법들을 활용하여 소수성 표면을 제작할 수 있다. 적층 제조 방법을 이용하면 기존의 마이크로 구조물을 제작 하는 방법에서는 구현하기 힘든 곡면과 같은 복잡한 형상을 가진 구조물을 가공할 수 있다. 적층 제조 방법에는 Fig. | |
꽃잎효과는 어떤 특성을 가지고 있는가? | 마지막으로 꽃잎 효과(petal effect)는 표면의 거칠기(roughness)으로 인해 소수성뿐만 아니라 물과의 강한 점착력(adhesion force)을 나타난다. 꽃잎효과는 큰 접촉각을 유지하면서도 강한 점착력으로 작은 물방울이 미끄러지지 않게 하는 특성을 가지고 있다. 그래서 이 꽃잎 효과는 물을 기름으로부터 용이하게 분리시키는 유수분리기에 많이 활용된다[1-2]. | |
vat photo-polymerization이란 어떤 방법인가? | 이 중에서 소수성 표면에 적합한 방법은 vat photo-polymerization이다. 이 방법은 광경화성 레진을 이용하여 UV 같은 광원을 통해 원하는 형상으로 경화시키는 적층 제조 방법으로 DLP(Digital Light Processing)와 SLA(Stereolithography Apparatus)가 있다. DLP와 SLA은 Fig. |
Yang, Y., Li, X., Chen, Z., Zhou, Q., Chen, Y., "3D-printed biomimetic super-hydrophobic structure for microdroplet manipulation and oil/water separation", Advanced Materials, Vol.30, 1704912, 2018, http://dx.doi.org/10.1002/adma.201704912
Kim, T. W., "A study on the anisotropic flow characteristics of droplets on rice leaf surface", J. Korean Soc. Tribol. Lubr. Eng., Vol.33, No.6, pp.251-255, 2017, https://doi.org/10.9725/kstle.33.6.251
Cho, I. H., Lee, J. H., Noh, J., Lee, S. W., "A study on surface fabrication of super hydrophobic using pico second laser", Journal of Korean Society for Precision Engineering, Vol.29, No.2, pp.161-169, 2012.
Darband, G. B., Aliofkhazraei, M., Khorsand, S., Sokhanvar, S., Kaboli, A., "Science and engineering of superhydrophobic surfaces: review of corrosion resistance, chemical and mechanical stability", Arabian Journal of Chemistry, Vol.13, No.1, pp.1763-1802, 2020.
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., Hui, D., "Additive manufacturing (3D printing): A review of materials, method, applications and challenges", Composites: Part B, Vol.143, pp.172-196, 2018.
Wang, J., Goyanes, A., Gaisford, S., Basit, A. W., "Stereoliyhographic (SLA) 3D printing of oral modified-release dosage forms", International Journal of Pharmaceutics, Vol.503, pp.207-212, 2016.
Varghese, G., Moral, M., et al., "Fabrication and characterization of ceramics via low-cost DLP 3D printing", Ceramic y Vidrio, Vol.57, pp.9-18, 2018.
Mu, Q., Wang, L., et al., "Digital light processing 3D Printing of conductive complex structures", Additive Manufacturing, Vol.18, pp.74-83, 2017.
Bhushan, B., Caspers, M., "An overview of additive manufacturing (3D printing) for microfabrication", Microsyst. Technol., Vol.23, No.4, pp.1117-1124, 2017.
Mao, M., He, J., Li, X., Zhang, B., Lei, Q., Liu, Y., Li, D., "The emerging Frontiers and applications of high-resolution 3D printing", Micromachines, Vol.8, No.4, pp.113, 2017.
Changhai, R., Jun, L., Shaorong, X., Yu, S., "A review of non-contact micro- and nano- printing technologies", J. Micromech. Microeng., Vol.24, No.5,053001, 2014.
Wang, X., Jiang, M., Zhou, Z., Gou, J., Hui, D., "3D printing of polymer matrix composites: a review and prospective", Compos. B Eng., Vol.110, pp.442-458, 2017.
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert-Demut, I., Schlier, L., Schlordt, T., Greil, P., "Additive manufacturing of ceramic-based materials", Adv. Eng. Mater., Vol.16, No.6, pp.729-754, 2014.
Vaezi, M., Seitz, H., Yang, S., "A review on 3D micro-additive manufacturing technologies", Int. J. Adv. Manuf. Technol., Vol.67, No.5, pp.1721-1754, 2013.
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., Schaedler, T. A., "Additive manufacturing of polymer-derived ceramics", Science, Vol.351, No.6268, pp. 58-62, 2016.
Manapt, J. Z., Chen, Q., Te, P., Advincula, R. C., "3D printing of polymer nanocomposites via stereolithography", Macromol. Mater. Eng., Vol.302, No.9, 1600553,2017.
Banks, J., "Adding value in additive manufacturing: researchers in the United Kingdom and Europe look to 3D printing for customization", IEEE pulse, Vol.4, No.6, pp.22-26, 2013.
Lee, H., Lim C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., Kim, Y-J., "Lasers in additive manufacturing a review", Int. J. Precis. Eng. Manuf-Green Technol., Vol.4, No.3, pp.307-322, 2017.
Mohamed, O. A., Masood, S. H., Bhowmik, J. L., "Optimization of fused deposition modeling process parameters: a review of current research and future prospects", Adv. Manuf., Vol.3, No.1, pp. 42-53, 2015.
Hong, S. H., "Literature review of fabrication of hydrophobic surfaces with 3D printer", Proc. Spring Conf. Korean Tribol. Soc., Pusan, Korea, April 2018.
Park, J. H., Park, J. S., Jin, H. J., Hong, S. H., "Fabrication of hydrophobic surfaces with stereolithography", Proc. Spring Conf. Korean Tribol. Soc., Pusan,Korea, April 2018.
Park, J. S., Park, J. H., Jin, H. J., Hong, S. H., "Fabrication of hydrophobic surfaces with variation of photocurable resins", Proc. Spring Conf. Korean Tribol. Soc., Pusan, Korea, April 2018.
Hong, S. H., "Fabrication of hydrophobic surfaces with stereolithography", Tribol. Lubr., submitted, 2020.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.