$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

분무 건조 알루미늄 실리케이트 과립 분말 제조를 위한 슬러리 최적화 연구
Optimization of slurry for manufacturing spray-dried aluminum silicate granular powder 원문보기

한국결정성장학회지 = Journal of the Korean crystal growth and crystal technology, v.31 no.6, 2021년, pp.264 - 269  

김현진 (부산대학교 재료공학과) ,  선우경 (부산대학교 재료공학과) ,  조혜수 (부산대학교 재료공학과) ,  윤석영 (부산대학교 재료공학과)

초록
AI-Helper 아이콘AI-Helper

본 연구는 공침법을 통하여 비정질 알루미늄 실리케이트 분말을 제조하였으며, 슬러리의 알루미늄 실리케이트 분말 함량 및 분산제 첨가량을 조절하여, 슬러리의 특성에 따른 분무 건조 알루미늄 실리케이트 과립 분말 제조의 영향 분석 및 최적화 연구를 진행하였다. 연구 결과, 알루미늄 실리케이트 슬러리의 분말 함량 27.5 wt% 이하, 슬러리의 분산제 첨가량 0.8 wt% 이상, pH 6~9의 중성 분위기의 슬러리에서 안정적으로 과립 분말이 제조되었으며, 슬러리의 분말 함량 20, 22.5 wt%에서 과립 분말의 평균 입도는 약 14 ㎛, 슬러리의 분말 함량 25, 27.5 wt%에서 과립 분말의 평균 입도가 약 19 ㎛인 것을 확인하였다. 분무 건조 과립 분말의 형상은 슬러리의 분산안정성 및 점도 영향을 받으며, 분말 함량이 높을수록 평균 입자 사이즈가 증가하는 것을 확인하였다.

Abstract AI-Helper 아이콘AI-Helper

In this study, amorphous aluminum silicate powder was prepared using co-precipitation method, and the influence of spray-dried aluminum silicate granular powder was analyzed and optimized by controlling the amount of aluminum silicate powder and dispersant added to the slurry. As a result, granular ...

주제어

표/그림 (8)

참고문헌 (16)

  1. A.K. Meena, G.K. Mishra, P.K. Pai, C. Rajgopal and P.N. Nagar, "Removal of heavy metal ions from aqueous solutions using carbon aerogel as an adsorbent", J. Hazard. Mater. 1 (2005) 161. 

  2. M. Arshadi, A.R. Faraji and M. Maryam, "Dye removal from aqueous solution by cobalt-nano particles decorated aluminum silicate: Kinetic, thermodynamic and mechanism studies", J. Colloid Interface Sci. (2015) 91. 

  3. C. Wong, J.P. Barford, G. Chen and G. Mckay, "Kinetics and equilibrium studies for the removal of cadmium ions by ion exchange resin", J. Environ. Chem. Eng. 1 (2014) 698. 

  4. A. Hussain, S. Madan and R. Madan, "Removal of heavy metals from wastewater by adsorption", Heavy Metals - Their Environmental Impacts and Mitigation, M. Nazal, Ed. (IntechOpen, London, 2021). 

  5. M.A. Treto-Suarez, J.O. Prieto-Garcia, A. Mollineda-Trujillo, E. Lamazares, Y. Hidalgo-Rosa and K. MenaUlecia, "Kinetic study of removal heavy metal from aqueous solution using the synthetic aluminum silicate", Scientific Reports 1 (2020) 10836. 

  6. M. Ince and O. Kaplan Ince, "An overview of adsorption technique for heavy metal removal from water/wastewater: A critical review", Int. J. Pure Appl. Sci. 2 (2017) 10. 

  7. L. Belchinskaya, L. Novikova, V. Khokhlov, J.L. Tkhi, "Contribution of ion-exchange and non-ion-exchange reactions to sorption of ammonium ions by natural and activated aluminosilicate sorbent", J. Appl. Chem. (2013) 9. 

  8. A. Krysztafkiewicz, L. Karolina, L. F. Ciesielczyk and T. Jesionowski, "Amorphous magnesium silicate - synthesis, physicochemical properties and surface morphology", Adv. Powder Technol. 5 (2004) 549. 

  9. W. Li, H. Wei, Y. Liu, S. Li, T. Guo and H. Han, "An in situ reactive spray-drying strategy for facile preparation of starch-chitosan based hydrogel microspheres for water treatment application", Chem. Eng. Processing - Process Intensification (2021) 108548. 

  10. K. Cal and K. Sollohub, "Spray drying technique. i: hardware and process parameters", J. Pharm. Sci. 2 (2010) 575. 

  11. S.J. Risch and G.A. Reineccius, "Spray-dried orange oil-effect of emulsion size on flavor retention and shelf stability", Am. Chem. Soc. (1988) 66. 

  12. C. Tokoro, S. Suzuki, D. Haraguchi and S. Izawa, "Silicate removal in aluminum hydroxide Co-precipitation process", Materials 2 (2014) 1084. 

  13. S. Vallar, D. Houiwet, J. El Fallah, D. Kervadec and J.-M. Haussonne, "Oxide slurries stability and powders dispersion: optimization with zeta potential and rheological measurements", J. Eur. Ceram. Soc. 6 (1999) 1017. 

  14. E.J.W. Verwey, "Theory of the Stability of Lyophobic Colloid" (Elsevier, Amsterdam, 1948) 205. 

  15. T. Missana and A. Adell, "On the applicability of DLVO theory to the prediction of clay colloids stability", J. Colloid Interface Sci. 1 (2000) 150. 

  16. Z. Yugang, C. Zhao, J. He and Y. Zhou, "Collective effects on thermophoresis of colloids: a microfluidic study within the framework of DLVO theory", Soft Matter. 9 (2013) 7726. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로