최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전자통신학회 논문지 = The Journal of the Korea Institute of Electronic Communication Sciences, v.16 no.6, 2021년, pp.1295 - 1302
조해준 (남서울대학교 전자공학과) , 김강호 (남서울대학교 전자공학과) , 장현수 (남서울대학교 전자공학과) , 전종환 (남서울대학교 전자공학과) , 이승대 (남서울대학교 전자공학과)
As the market size of 3D printers increases, the precision of the printout and the speed of operation by the motor are very important issues. In this parer, G-code of each output was generated using a CURA program to compare whether the output of the PLC equipment is the same as that of the Arduino ...
H. Park, "Overview of 3D Printing Technology Status and Applications," J. of the The Korean Society of Mechanical Engineers, vol. 54, no. 4, Apr. 2014, pp. 32-35.
Y. Kim, "3D Printing Market and Technology Trends," S&T Market Report, Nov. 2020.
B. Kim, S. Ro, and J. Park, "Development of an NC System with a G-code Interpreter," Korean Society for Precision Engineering, vol. 2008, no. 6, June 2008, pp. 81-82.
S. Lee and E. Choi "STL-G Code Conversion Method for Medical 3D Printer," In Proc. of the Korea Institute of communications and Information Sciences, Jeju, Korea, June 2017, pp. 158-159.
K. Yoo, Y. Kang, I. Choi, J. Lee, and B. Kim, "Development of open PLC robot monitoring system based on EtherCAT," In Proc. of The International Korean Society of Manufacturing Technology Engineers, Pyeongchang, Korea, July 2020, pp. 133-133.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.