참고문헌 (27)

1. https://www.chosun.com/economy/tech_it/2021/10/14/QSUV6NPMOFASLOOR4ILWZ46FA4/(retrieved on Oct. 18, 2021) 

2. H. Liu, H. Zhang, W. Han, H. Lin, R. Li, J. Zhu, and W. Huang, "3D Printing Flexible Strain Sensors: From Printing to Devices and Signals", Adv. Mater., Vol. 33. 8, pp. 2004782(1)-2004782(19), 2021. 

3. T. Blachowicz and A. Ehrmann, "3D Printed MEMS Technology-Recent Developments and Applications", Micromachines, Vol. 11, No. 4, pp. 434(1)-434(14), 2020. 

   상세보기

4. A. Mora, P. Verma, and S. Kumar, "Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling", Compos. B. Eng., Vol. 183. pp. 107600(1)-107600(28), 2020. 

5. S. J. Leigh, R. J. Bradley, C. P. Purssell, D. R. Billson, and D. A. Hutchins, "A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors", PLoS One, Vol. 7, No. 11, pp. e49365(1)-e49365(6), 2012. 

   상세보기

6. S. H. Oh, "3D printing of Ceramics: Introduction and the Feasibility in Dentistry", J. Korean Dent. Assoc., Vol. 58, No. 7, pp. 448-459, 2020. 

   

7. H. Guo, R. Lv, and S. Bai, "Recent advances on 3D printing graphene-based composites", Nano Mater. Sci., Vol. 1, No. 2, pp. 101-115, 2019. 

   상세보기

8. S. H. Ko and J. H, Kwon, "Printing for Micro/nano-fabrication", J. KSME, Vol. 59, No. 3, pp.22-43, 2019. 

9. G. Postiglione, G. Natale, G. Griffini, M. Levi, and S. Turri, "Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling", Compos. A, Vol. 76, pp. 110-114, 2015. 

   상세보기

10. K. Gnanasekaran, T. Heijimans, S. V. Bennekom, H. Woldhuis, S. Winjnia, G.D. With, and H. Friedrich, "3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling", Appl. Mater. Today, Vol. 9, pp. 21-28, 2017. 

    상세보기

11. I. P. Kang, M. J. Schulz, J. H. Kim, S. Shanov, and D. Shi, "A Carbon Nanotube Strain Sensor for Structural Health Monitoring", Smart Mater. Struct., Vol. 15, No. 3, pp. 737-748, 2006. 

    상세보기

12. I. P. Kang, "A Study on Sensing Characteristics of Carbon Nanotube Smart Composite Nano Sensors Based on Electrical Impedance Measurement", J. Korean Soc. Power System Engineering, Vol. 13, No. 1, pp. 65-71, 2009. 

13. S. Y. Kim and I. P. Kang, "A Study on the Development of a Novel Pressure Sensor based on Nano Carbon Piezoresistive Composite by Using 3D Printing", Trans. Korean Soc. Mech. Eng. - A, Vol. 41, No. 3, pp. 187-192, 2017. 

    원문보기 상세보기

14. K. Y. Joung, S. Y. Kim, I. P. Kang, and S. H. Cho, " 3D-Printed Load Cell Using Nanocarbon Composite Strain Sensor", Sens., Vol. 21, No. 11, 2021. 

15. J. F. Christ, N. Aliheidari, P. Potschke, and A. Ameli, "Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites", Polym., Vol. 11, No. 1, pp. 11(1)-11(16), 2019. 

    상세보기

16. W. Huang, K. Dai, Y. Zhai, H. Liu, P. Zhan, J. Gao, G. Zheng, C. Liu, and C. Shen, "Flexible and Lightweight Pressure Sensor Based on Carbon Nanotube/Thermoplastic Polyurethane-Aligned Conductive Foam with Superior Compressibility and Stability", ACS App. Mater. Interfaces, Vol. 9, No. 48, pp. 42266-42277, 2017. 

    상세보기

17. K. Li, H. Wei, and W. Liu, "3D printed stretchable capacitive sensors for highly sensitive tactile and electrochemical sensing", Nanotechnol., Vol. 29 No. 18, pp. 185501(1)-185501(8), 2018. 

    

18. X. Wan, F. Zhang, Y. Liu, and J. Leng, "CNT-based electro-responsive shape memory functionalized 3D printed nanocomposites for liquid sensors", Carbon, Vol. 155, pp. 77-87, 2019. 

    상세보기

19. T. D. Ngo, A. Kashan, G. Imbalzano, K. T. Q. Nguyen, and D. Hui, "Additive manufacturing (3D printing): A review of materials, methods, applications and challenges", Compos. B Eng., Vol. 143, pp. 172-196, 2018. 

    상세보기

20. T. Xiao, C. Qian, and R. Yin, "3D Printing of Flexible Strain Sensor Array Based on UV-Curable Multiwalled Carbon Nanotube/Elastomer Composite", Adv. Mater. Technol., Vol. 6, No. 1, pp. 2000745(1)-200745(10), 2020. 

21. A. Cortes, X. F. Sanchez-Romate, and A. Jimenez-Suarez "Mechanical and Strain-Sensing Capabilities of Carbon Nanotube Reinforced Composites by Digital Light Processing 3D Printing Technology", Polym., Vol. 12, No. 4, pp. 975(1)-975(15), 2020. 

    상세보기

22. G. Gonzalez, E. Fantino, and V. Bertana, "Development of 3D printable formulations containing CNT with enhanced electrical properties", Polym., Vol. 109, pp. 246-253, 2017. 

    상세보기

23. https://3dplife.tistory.com/100 (retrieved on Oct. 10, 2021) 

24. M. G. A. Mohamed, H. Kumer, and Z. Wang, "Rapid and Inexpensive Fabrication of Multi-Depth Microfluidic Device using High-Resolution LCD Stereolithographic 3D Printing", Manuf. Mater. Process., Vol. 3, No. 1, pp. 26(1)-26(11), 2019. 

25. I. P. Kang, K. Y. Joung, B. K. Choi, S. Y. Kim, G. W. Oh, B. T. Kim, and W. K. Baek, "A Study on Load Cell Development by means of Nano-Carbon Piezo-resistive Composite and 3D printing", J. Drive Control, Vol. 17, No. 4, pp. 97-102, 2020. 

    원문보기 상세보기

26. J. F. Christ, N. Aliheidari, A. Ameli, and P. Potschke, "3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nano composites", Mater. Des., Vol. 131, pp. 392-401, 2017. 

27. K. Y. Kim, J. H. Park, J. H. Suh, M .S. Kim, Y. R. Jeong, and I.K. Park, "3D printing of multiaxial force sensors using carbon nanotube (CNT)/thermoplastic polyurethane (TPU) filaments", Sens. Actuators A Phys., Vol. 263, pp. 493-500, 2017. 

    상세보기

저자의 다른 논문 :

김성용 (5) 최백규 (2) 강인필 (12)