최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국수소 및 신에너지학회 논문집 = Transactions of the Korean Hydrogen and New Energy Society, v.32 no.6, 2021년, pp.636 - 641
베르니케 페브리아나 사모서 (울산대학교 대학원 기계공학부) , 조원준 ((주)바이오프랜즈) , 임옥택 (울산대학교 대학원 기계공학부)
Using numerical analysis, various factors influencing the performance development of high-pressure pumps for Dimethyl Ether (DME) engines were identified and the impact of each factor was evaluated using Taguchi method. DME fuels are more compressive than diesel fuels and have the lower heat generat...
C. Arcoumanis, "The second european auto-oil program (AOLII)", A. F. f. Transportation, 2000.
A. van Doorn, M. van Walwijk, "Global assessment of Dimethyl-ether as an automotive fuel (second edition)", TNO wegtransportmiddelen, 1996.
C. Arcoumanis, C. Bae, R. Crookes, and E. Kinoshita, "The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines. Fuel, Vol. 87, No. 7, 2008, pp. 1014-1030, doi; https://doi.org/10.1016/j.fuel.2007.06.007.
J. Szybist, S. McLaughlin, and S. Iyer, "Emissions and performance benchmarking of a prototype dimethyl ether-fueled heavy-duty truck", ORNL, 2014. Retrieved from https://afdc.energy.gov/files/u/publication/ornl_dme_tm-2014-59.pdf.
"Mass flow rate", NASA. Retrieved from https://www.grc.nasa.gov/www/k-12/airplane/mflow.html.
Z. Y. Wu, H. W. Wu, and C. H. Hung, "Applying Taguchi method to combustion characteristics and optimal factors determination in diesel/biodiesel engines with port-injecting LPG", Fuel, Vol. 117, 2014, pp. 8-14, doi: https://doi.org/10.1016/j.fuel.2013.09.005.
Taguchi G, "Introduction to quality engineering: designing quality into products and processes", MacMillan, New York, 1986.
S. Yang and C. Lee, "Experimental research on the injection rate of DME and diesel fuel in common rail injection system by using bosch and zeuch methods", MDPI, Vol. 11, No. 2, pp. 273, doi: https://doi.org/10.3390/en11020273.
M. Glensvig, S. C. Sorenson, and D. L. Abata, "High pressure injection of dimethyl ether", Technical University of Denmark, 1997. Retrieved from https://www.osti.gov/etdeweb/servlets/purl/618171.
V. R. Joseph and C. F. Wu, "Performance measures in dynamic parameter design", Mathematics, 2002.
T. Ganapathy, K. Murugesan, and R. P. Gakkhar, "Performance optimization of Jatropha biodiesel engine model using taguchi approach", Apply Energy, Vol. 86, No.11, 2009, pp. 2476-2486, doi: http://dx.doi.org/10.1016/j.apenergy.2009.02.008.
R. G. Akay and A. B. Yurtcan, "Direct liquid fuel cells fundamentals, advances and Future", AP, 2020, pp. 177-189.
V. Mrzljak, B. Zarkovic, and I. Poljak, "Fuel mass flow variation in direct injection diesel engine - Influence on the change of the main engine operating parameters", Pomorstvo, Vol. 31, No. 2, 2017, pp. 119-127.
T. A. Semelsberger, R. L. Borup, and H. L. Greene, "Dimethyl ether (DME) as an alternative fuel", Journal of Power Sources, Vol. 156, No. 2, pp. 497-511, doi: https://doi.org/10.1016/j.jpowsour.2005.05.082.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.