$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

나노셀룰로스 필러의 구조적 차이 및 함량에 따른 PLA의 결정화 거동 고찰
Effect of Different Morphology of Nucleating Agents on the Crystallization Behavior of Poly Lactic Acid/Nanocellulose Composites

한국섬유공학회지 = Textile science and engineering, v.58 no.6, 2021년, pp.322 - 327  

박상현 (건국대학교 공과대학 유기나노시스템공학과) ,  김형섭 (건국대학교 공과대학 유기나노시스템공학과) ,  김태호 (건국대학교 공과대학 유기나노시스템공학과) ,  박세원 (건국대학교 공과대학 유기나노시스템공학과) ,  김민형 (건국대학교 공과대학 유기나노시스템공학과) ,  안정빈 (건국대학교 공과대학 유기나노시스템공학과)

Abstract AI-Helper 아이콘AI-Helper

In this study, two types of nanocellulose were introduced in poly lactic acid (PLA) as nucleation agents, and the crystallization behavior of the composite was studied. Owing to the different aspect ratio, the effect of cellulose nanocrystal (CNC) and cellulose nanofiber (CNF) on the PLA behavior wa...

주제어

참고문헌 (30)

  1. R. Dris, H. Imhof, W. Sanchez, J. Gasperi, F. Galgani, B. Tassin, and C. Laforsch, "Beyond the Ocean: Contamination of Freshwater Ecosystems with (micro-)plastic Particles", Environ. Chem., 2015, 12, 539-550. 

  2. W. C. Li, H. F. Tse, and L. Fok, "Plastic Waste in the Marine Environment: A Review of Sources, Occurrence and Effects", Sci. Total. Environ., 2016, 566-567, 333-349. 

  3. F. Gironi and V. Piemonte, "Bioplastics and Petroleum-based Plastics: Strengths and Weaknesses", Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2011, 33, 1949-1959. 

  4. R. L. Reddy, V. S. Reddy, and G. A. Gupta, "Study of Bioplastics as Green and Sustainable Alternative to Plastics", Int. J. Emerg. Technol. Adv. Eng., 2013, 3, 76-81. 

  5. C. R. Alvarez-Chavez, S. Edwards, R. Moure-Eraso, and K. Geiser, "Sustainability of Bio-based Plastics: General Comparative Analysis and Recommendations for Improvement", J. Clean. Prod., 2012, 23, 47-56. 

  6. J. Dikgang, A. Leiman, and M. Visser, "Analysis of the Plasticbag Levy in South Africa, Resources, Conservation and Recycling", Resour. Conserv. Recy., 2012, 66, 59-65. 

  7. P. K. Bajpai, I. Singh, and J. Madaan, "Development and Characterization of PLA-based Green Composites: A Review", J. Thermoplast. Compos. Mater., 2014, 27, 52-81. 

  8. Q. Chen, J. D. Mangadlao, J. Wallat, A. De Leon, J. K. Pokorski, and R. C. Advincula, "3D Printing Biocompatible Polyurethane/poly(lactic acid)/graphene Oxide Nanocomposites: Anisotropic Properties", ACS Appl. Mater. Interfaces, 2017, 9, 4015-4023. 

  9. J. Lunt, "Large-scale Production, Properties and Commercial Applications of Polylactic Acid Polymers", Polym. Degrad. Stabil., 1998, 59, 145-152. 

  10. M. P. Arrieta, M. D. Samper, M. Aldas, and J. Lopez, "On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications", Materials, 2017, 10, 1008-1033. 

  11. C. Zengwen, H. Pan, J. Bian, L. Han, H. Zhang, L. Dong, and Y. Yang, "Transform Poly(lactic acid) Packaging Film from Brittleness to Toughness Using Traditional Industrial Equipments", Polymer, 2019, 180, 121728-121734. 

  12. M. Razavi and S. Q. Wang, "Why is Crystalline Poly(lactic acid) Brittle at Room Temperature?", Macromolecules, 2019, 52, 5429-5441. 

  13. Y. Yu, P. Xu, S. Jia, H. Pan, H. Zhang, D. Wang, and L. Dong, "Exploring Polylactide/poly(butylene adipate-co-terephthalate)/rare Earth Complexes Biodegradable Light Conversion Agricultural Films", Int. J. Biol. Macromol., 2019, 127, 210-221. 

  14. X. Li, X. Ai, H. Pan, J. Yang, G. Gao, H. Zhang, H. Yang, and L. Dong, "The Morphological, Mechanical, Rheological, and Thermal Properties of PLA/PBAT Blown Films with Chain Extender", Polym. Adv. Technol., 2018, 29, 1706-1717. 

  15. N. Ning, S. Fu, W. Zhang, F. Chen, K. Wang, H. Deng, Q. Zhang, and Q. Fu, "Realizing the Enhancement of Interfacial Interaction in Semicrystalline Polymer/filler Composites via Interfacial Crystallization", Prog. Polym. Sci., 2021, 37, 1425-1455. 

  16. L. Bokobza, M. Rahmani, C. Belin, J. L. Bruneel, and N. E. El Bounia, "Blends of Carbon Blacks and Multiwall Carbon Nanotubes as Reinforcing Fillers for Hydrocarbon Rubbers", J. Polym. Sci. Part B: Polym. Phys., 2008, 46, 1939-1951. 

  17. G. Mittal, V. Dhand, K. Y. Rhee, S.-J. Park, and W. R. Lee, "A Review on Carbon Nanotubes and Graphene as Fillers in Reinforced Polymer Nanocomposites", J. Ind. Eng. Chem., 2015, 21, 11-25. 

  18. Y. Liu, Y. Zhao, B. Sun, and C. Chen, "Understanding the Toxicity of Carbon Nanotubes", Acc. Chem. Res., 2013, 46, 702-713. 

  19. Y. Habibi, L. A. Lucia, and O. J. Rojas, "Cellulose Nanocrystals: Chemistry, Self-Assembly, and Applications", Chem. Rev., 2010, 110, 3479-3500. 

  20. Q. Wang, C. Ji, J. Sun, Q. Zhu, and J. Liu, "Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils", Molecules, 2020, 25, 3306. 

  21. M. N. F. Norrahim, N. A. M. Kasim, V. F. Knight, N. A. Halim, N. A. A. Shah, S. A. M. Noor, S. H. Jamal, K. K. Ong, W. M. Z. W. Yunus, M. A. A. Farid, M. A. Jenol, and I. R. Ahmad, "Performance Evaluation of Cellulose Nanofiber Reinforced Polymer Composites", Funct. Compos. Struct., 2021, 149, 543-547. 

  22. T. Kim, E. Ko, J. Ahn, S. Park, S. Pak, M. Kim, and H. Kim, "Rheological Behavior of Polylactic Acid Solution and Physical Properties of Resulting Film Using Cellulose Nanocrystals", Text. Sci. Eng., 2020, 57, 1-7. 

  23. Y. Shimizu, K. Sakakibara, S. Akimoto, and Y. Tsujii, "Effective Reinforcement of Poly(methyl methacrylate) Composites with a Well-Defined Bactrial Cellulose Nanofiber Network", ACS Sustain. Chem. Eng., 2019, 7, 13351-13358. 

  24. Y. Liu, H. H. Winter, and S. L. Perry, "Linear Viscoelasticity of Complex Coacervates", Adv. Colloid. Interface. Sci., 2017, 239, 46-60. 

  25. R. Salehiyan and K. Kim, "Effect of Organoclay on Non-linear Rheological Properties of Poly(lactic acid)/poly(caprolactone) Blends", Korean J. Chem. Eng., 2013, 30, 1013-1022. 

  26. V. S. G. Silverajah, N. A. Ibrahim, W. M. Z. W. Yunus, H. A. Hassan, and C. B. Woei, "A Comparative Study on the Mechanical, Thermal and Morphological Characterization of Poly(lactic acid)/epoxidized Palm Oil Blend", Int. J. Mol. Sci., 2012, 13, 5878-5898. 

  27. M. E. K. Sofla, R. J. Brown, T. Tsuzuki, and T. J. Rainey, "A Comparison of Cellulose Nanocrystals and Cellulose Nanofibers Extracted from Bagasse Using Acid and Ball Milling Methods", Adv. Nat. Sci: Nanotechnol., 2016, 7, 1-9. 

  28. Y. T. Hsieh, S. Nozaki, M. Kido, K. Kamitani, K. Kojio, and A. Takahara, "Crystal Polymorphism of Polylactide and Its Composites by X-ray Diffraction Study", Polym. J., 2020, 52, 755-763. 

  29. F. Akti, "Catalytic Degradation of Polylactic Acid over Al 2 O 3 @SiO 2 Core-Shell Catalysts", J. Polym. Environ., 2021, 29, 2236-2247. 

  30. K. Kanomata, N. Tatebayashi, X. Habaki, and T. Kitaoka, "Cooperative Catalysis of Cellulose Nanofiber and Organocatalyst in Direct Aldo Reactions", Sci. Rep., 2018, 8, 4098-4103. 

저자의 다른 논문 :

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로