최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.25 no.6, 2021년, pp.209 - 217
왕기 (충남대학교 대학원 건축공학과) , 김동휘 (충남대학교 대학원 건축공학과) , 윤현도 (충남대학교 건축공학과) , 장석준 (국토안전관리원, 건축물관리센터) , 김선우 (충남대학교 건설공학교육과)
This paper investigates the effect of high strength hooked-end steel fiber content and aspect ratio on the compressive and flexural performance of concrete. A total of ten mixtures were prepared and tested. Concretes with specific compressive strength of 30 MPa were reinforced with three different a...
Rossi, P. (1992), Mechanical behaviour of metal-fibre reinforced concretes. Cement and Concrete Composites, 14(1), 3-16.
Yazici, S., Inan, G., and Tabak, V. (2007), Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC. Construction and Building Materials, 21(6), 1250-1253.
Jang, S. J., and Yun, H. D. (2018), Combined effects of steel fiber and coarse aggregate size on the compressive and flexural toughness of high-strength concrete. Composite Structures, 185, 203-211.
Abbass, W., Khan, M. I., and Mourad, S. (2018), Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete. Construction and Building Materials, 168, 556-569.
Chen, G., Gao, D., Zhu, H., Yuan, J. S., Xiao, X., and Wang, W. (2021), Effects of novel multiple hooked-end steel fibres on flexural tensile behaviour of notched concrete beams with various strength grades. Structures, 33, 3644-3654.
Nataraja, M. C., Dhang, N., and Gupta, A. P. (1999), Stress-strain curves for steel-fiber reinforced concrete under compression. Cement and Concrete Composites, 21(5-6), 383-390.
Tiberti, G., Trabucchi, I., AlHamaydeh, M., Minelli, F., and Plizzari, G. (2017), Crack control in concrete members reinforced by conventional rebars and steel fibers. In IOP Conference Series: Materials Science and Engineering, 246(1), 012008.
KS F 2403 (2014), Standard Test Method of Making and Curing Concrete Specimens, Korean Standards Association (in Korean).
European Committee for Standardization (2005), EN 14651 test method for metallic fibered concrete-Measuring the flexural tensile strength (limit of proportionality (LOP), residual), Brussels, Belgium.
RILEM Committee on Fracture Mechanics of Concrete-Test Methods (RILEM 50-FMC). 16 Determination of the fracture energy of mortar and concrete by means of three-point bend test 17 on notched beams.Mater Struct, 18, 285290, (1985).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.