최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.25 no.5, 2021년, pp.149 - 156
최소영 (강릉원주대학교 방재연구소) , 최명성 (단국대학교, 토목환경공학과) , 김일순 (강릉원주대학교 방재연구소) , 양은익 (강릉원주대학교, 토목공학과)
FRP has been proposed to replace the steel as a reinforcement in the concrete structures for addressing the corrosion issue. However, FRP-Rebar does not behave in the same manner as steel because the properties of FRP are different. For example, FRP-Rebar has a high tensile strength, low stiffness, ...
Hwang, C. S., Park, J. S., Park, K. T., and Kwon, J. S. (2017), Mechanical Performance Evaluation of RC Beams with FRP Hybrid Bars under Cyclic Loads, Journal of the Korea Institute for Structural Maintenance and Inspection, KSMI, 21(1), 9-14.
Nanni, A., Micelli, F., and La-Tegola, A. (2001), Durability of GFRP Bars Subjected to Aggressive Environment, Proceeding of 22nd International SAMPLE Europe Conference, Paris, 431-443.
Alkhrdaji, T., Nanni, A., Chen, G., and Barker, M. (1999), Upgrading the transportation Infrastructure: Solid RC Decks Strengthened with FRP, Concrete International, 21(10), 37-41.
Nanni, A., Nenninger, J., Ash, K., and Liu, J. (1997), Experimental Bond Behavior of Hybrid Rods for Concrete Reinforcement, Structural Engineering and Mechanics, ACI, 5(4), 339-354.
ACI Committee 440 (2006), Guide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI 440.1R-06), American Concrete Institute, Michigan.
CSA Group (2002), Design and Construction of Building Components with Fibre-Reinforced Polymers (CAN/CSA S806-02), Canadian Standard Association, Canada, 2002
JSCE Research Subcommittee on continuous Fiber Reinforcing Materials (1997), Recommendations for Design and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials, Japan Society of Civil Engineers, 1997.
KCI Committee 112 (2019), FRP reinforcement structural design guidelines (KCI PM112.1-19), Korea Concrete Institute, Seoul.
Orangun, C. O., Jirsa, J. O., and Breen, J. E. (1977), A Reevaluation of Test Data on Development Length and Splices, Journal Proceedings, ACI, 74(3), 114-122.
ACI Committee 318 (2008), Building Code Requirements for Structural Concrete and Commentary (ACI 318M-08), American Concrete Institute, Michigan, 465.
ACI Committee 408 (2003), Bond and development of straight reinforcing bars intension (ACI 408R-03), American Concrete Institute, Michigan, 6-9.
Tang, C.W., and Chen, C. K. (2020), Modeling Local Bond Stress-Slip Relationships of Reinforcing Bars Embedded in Concrete with Different Strengths, Materials, 13(17), 3701.
Lutz, L. A., and Gergely, P. (1967), Mechanics of Bond and Slip of Deformed Reinforcement, ACI Journal Proceedings 64(11), 711-721.
Lee, J. Y. (2011), Reinforced Concrete Structures, DongHwa Technology Publishing Co., Paju, 332-335.
ASTM (2015), Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens (A944-15R), ASTM International, PA.
RILEM (1973), Bond Test for Reinforcing Steel: 1-beam test (7-II-28D), Tentative Recommendations, RILEM Journal Materials and Structures, 6(32), 96-105.
British Standards Institution (BSI) (2005), Steel for the Reinforcement of Concrete-Weldable Reinforcing Steel-Bar, Coil and Decoiled Product-Specification (BS 4449), British Standards Institution, London, 16-22.
British Standards Institution (BSI) (2000), Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 1: Short term test (BS EN 12269-1), British Standards Institution, London, 1-9.
ACI Committee 440 (2007), Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures (ACI 440R-07), American Concrete Institute, Michigan, 19-21.
Rteil, A., Soudki, K. and Topper, T. (2011), Mechanics of bond under repeated loading, Construction and Building Materials. 25 (6), 2822-2827.
Noel, M. and Parvizi, M. (2020), Bond-Stress Distribution of GFRP-Reinforced Concrete Beams Containing Seawater, Journal of Composites for Construction, ASCE, 24(4), 04020035.
Mazin M. Sarhan, Muhammad N.S. Hadi, and Lip H. Teh (2018), Bond behaviour of steel plate reinforced concrete beams, Construction and Building Materials, 189, 751-756
Hamad, B.S., Ali, A.Y.H. and Harajli, M.H. (2005), Effect of fiber-reinforced polymer confinement on bond strength of reinforcement in beam anchorage specimens, Journal of Composites for Construction, ASCE, 9(1), 44-51.
Choi, D. U., Chun, S. C., and Ha, S.S.(2012), Bond strength of glass fibre-reinforced polymer bars in unconfined concrete, Engineering Structures, 34, 303-313.
Darwin, D., and Graham, E. K. (1993), Effect of Deformation Height and Spacing on Bond Strength of Reinforcing Bars, ACI Structural Journal, 90(6), 646-657.
Chun, S. C., Choi, D. U., Ha, S.S., and Oh, B. H.(2008), Prying Action of Spliced Reinforcements in Tension, Proceedings of the Korea Concrete Institute Conference, 20(1), KCI, 1085-1088.
Okelo, R. (2007), Realistic Bond Strength of FRP Rebars in NSC from Beam Specimens, Journal of Aerospace Engineering, ASCE, 20(3), 133-140.
Okelo, R., and Yuan, R. L. (2005), Bond Strength of Fiber Reinforced Polymer Rebars in Normal Strength Concrete, Journal of Composites for Construction, ASCE, 9(3), 203-213.
Oh, H. S, Sim, J. S., Kang, T. S., and Kwon, H. W. (2011), An Experimental Study on the Flexural Bonding Characteristic of a Concrete Beam Reinforced with a GFRP Rebar, KSCE Journal of Civil Engineering, KSCE, 15(7), 1245-1251.
Harajli1, M., and Abouniaj, M. (2010), Bond Performance of GFRP Bars in Tension: Experimental Evaluation and Assessment of ACI 440 Guidelines, Journal of Composites for Construction, ASCE, 14(6), 659-668.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.