최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국섬유공학회지 = Textile science and engineering, v.58 no.1, 2021년, pp.17 - 24
하진수 (전남대학교 고분자융합소재공학부) , 송예은 (전남대학교 고분자융합소재공학부) , 주양율 (전남대학교 고분자융합소재공학부) , 황정민 (단국대학교 파이버시스템공학과) , 윤지선 (한국세라믹기술원 에너지저장소재센터) , 이두진 (전남대학교 고분자융합소재공학부)
The dispersibility of nanoparticles in polymer nanocomposites significantly affects the mechanical, thermal, and electrical properties of the final products. The objective of this study is to quantify the dispersibility of nanoparticles in polymer nanocomposites. Various amounts of graphene nanopart...
H. Chang and H. Wu, "Graphene-based Nanocomposites: Preparation, Functionalization, and Energy and Environmental Applications", Energy Environ. Sci., 2013, 6, 3483-3507.
J. Jordan, K. I. Jacob, R. Tannenbaum, M. A. Sharaf, and I. Jasiuk, "Experimental Trends in Polymer Nanocomposites-a Review", Mater. Sci. Eng.: A, 2005, 393, 1-11.
J. Gu, N. Li, L. Tian, Z. Lv, and Q. Zhang, "High Thermal Conductivity Graphite Nanoplatelet/UHMWPE Nanocomposites", Rsc Adv., 2015, 5, 36334-36339.
Y. Ju, J. Ha, Y. Song, J. S. Yun, and D. Lee, "Optimizing the Printability and Dispersibility of Functionalized Zirconium Oxide/acrylate Composites with Various Nano-to Microparticle Ratios", Ceram. Int., 2020, 46, 26903-26910.
S. Y. Fu, Z. K. Chen, S. Hong, and C. C. Han, "The Reduction of Carbon Nanotube (CNT) Length during the Manufacture of CNT/polymer Composites and a Method to Simultaneously Determine the Resulting CNT and Interfacial Strengths", Carbon, 2009, 47, 3192-3200.
Q. Zhang, F. Fang, X. Zhao, Y. Li, M. Zhu, and D. Chen, "Use of Dynamic Rheological Behavior to Estimate the Dispersion of Carbon Nanotubes in Carbon Nanotube/polymer Composites", The J. Phys. Chem. B, 2008, 112, 12606-12611.
M. Kim, H. Y. Song, W. J. Choi, and K. Hyun, "Evaluation of the Degree of Dispersion of Polymer Nanocomposites (PNCs) Using Nonlinear Rheological Properties by FT-rheology", Macromolecules, 2019, 52, 8604-8616.
Y. Y. Kim, B. Y. Lee, J. S. Kim, and J. K. Kim, "Quantitative Evaluation of Fiber Dispersion of the Fiber-reinforced Cement Composites Using an Image Processing Technique", J. Korean Soc. Nondestruct. Test., 2007, 27, 148-156.
Z. Li, Y. Gao, K. S. Moon, Y. Yao, A. Tannenbaum, and C. P. Wong, "Automatic Quantification of Filler Dispersion in Polymer Composites", Polymer, 2012, 53, 1571-1580.
J. Cho, H. Lee, K. H. Nam, H. Yeo, C. M. Yang, D. G. Seong, D. Lee, and S. Y. Kim, "Enhanced Electrical Conductivity of Polymer Nanocomposite Based on Edge-selectively Functionalized Graphene Nanoplatelets", Compos. Sci. Technol., 2020, 189, 108001.
J. H. Kim, D. J. Kwon, P. S. Shin, Y. M. Baek, H. S. Park, K. L. DeVries, and J. M. Park, "New Evaluation of Interfacial Properties and Damage Sensing in CFRC by VARTM Using 3D ER Mapping", Compos. Part B: Eng., 2018, 155, 178-186.
S. Lee, M. Kim, H. Y. Song, and K. Hyun, "Characterization of the Effect of Clay on Morphological Evaluations of PLA/Biodegradable Polymer Blends by FT-Rheology", Macromolecules, 2019, 52, 7904-7919.
H. Y. Song and K. Hyun, "Decomposition of Q0 from FT-rheology into Elastic and Viscous Parts: Intrinsic-nonlinear Master Curves for Polymer Solutions", J. Rheol., 2018, 62, 919-939.
M. El Achaby, F. E. Arrakhiz, S. Vaudreuil, A. el Kacem Qaiss, M. Bousmina, and O. Fassi-Fehri, "Mechanical, Thermal, and Rheological Properties of Graphenebased Polypropylene Nanocomposites Prepared by Melt Mixing", Polym. Compos., 2012, 33, 733-744.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.