최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.30 no.1, 2021년, pp.5 - 15
황유진 (인하대학교 신소재공학과) , 김관영 (안동대학교 재료공학과) , 김규식 (인하대학교 신소재공학과) , 김세광 (한국생산기술연구원) , 윤영옥 (한국생산기술연구원) , 이기안 (인하대학교 신소재공학과)
The effects of heat treatments (T6 and T73) on the microstructure, mechanical properties, and high cycle fatigue behavior of modified AA7075 alloys were investigated. A modified 7075 alloy was manufactured using modified-Mg (Mg-Al2Ca) instead of the conventional element Mg. Based on the microstructu...
J. S. Park, S. Y. Sung, B. S. Han, C. Y. Jung, K. A. Lee, 2009, High temperature fatigue deformation behavior of automotive heat resistant aluminum alloys. Kor. J Met. Mater., Vol. 48, pp. 28-38. http://doi.org/10.3365/KJMM.2010.48.01.028
W. S. Miller, L. Zhuang, J. Bottema, A. J. Wittebrood, P. D. Smet, A. Hazler, A. Vieregge, 2000, Recent development in aluminium alloys for the automotive industry, Mater. Sci. Res. Eng. Vol. 280, pp. 37-49. https://doi.org/10.1016/S0921-5093(99)00653-X
S. H. Kim, K. S. Kim, S. K. Kim, Y. O. Yoon, K. S. Cho, K. A. Lee, 2013, Microstructure and mechanical properties of Eco2024-T3 aluminum alloy. Adv Mater, Vol. 602-604, pp. 623-626. https://doi.org/10.4028/www.scientific.net/AMR.602-604.623
G. Y. Kim, K. S. Kim, J. C. Park, S. K. Kim, Y. O. Yoon and K. A. Lee, High cycle fatigue and fatigue crack propagation behaviors of modified A7075-T73 alloy, 2013, Korea J. Met. Mater. Vol. 52, No. 4, pp. 283-291. http://doi.org/10.3365/KJMM.2014.52.4.283
D. L. DuQuesnay, P. R. Underhill, H. J. Britt, 2003, Fatigue crack growth from corrosion damage in 7075-T6511 aluminium alloy under aircraft loading. Int. J. Fatigue, Vol. 25, No. 5, pp. 371-377. https://doi.org/10.1016/S0142-1123(02)00168-8
T. Zhao, Y. Jiang, 2008, Fatigue of 7075-T651 aluminum alloy. Int. J. Fatigue, Vol. 30, No. 5, pp. 834-849. https://doi.org/10.1016/j.ijfatigue.2007.07.005
Y. Xue, H. E. Kadiri, M. F. Horstemeyer, J. B. Jordon, H. Weiland, 2007, Micromechanisms of multistage fatigue crack growth in a high-strength aluminum alloy. Acta Mater., Vol. 55, pp. 1975-1984. https://doi.org/10.1016/j.actamat.2006.11.009
K. S. Al-Rubaie, M. A. Del Grand, D. N. Travessa, K. R. Cardoso, 2007, Effect of pre-strain on the fatigue life of 7050-T7451 aluminium alloy, Mater. Sci. Eng. A, Vol. 464, pp. 141-150. https://doi.org/10.1016/j.msea.2007.02.024
S. Lavenstein, Y. Gu, D. Madisetti, J. A. El-Awady, 2020, The heterogeneity of persistent slip band nucleation and evolution in metals at the micrometer scale, Science, Vol. 370, No. 6513, pp. eabb2690. http://doi.org/10.1126/science.abb2690
P. K. Domalavage, J. N. Grant, Y. Gefen, 2007, Structure and properties of rapidly solidified 7075 P/M aluminum alloy modified with nickel and zirconium, Metall Trans A, Vol. 14, pp. 1599-1606. https://doi.org/10.1007/BF02654387
P. Das, R. Jayaganhan, T. Chowdhury, I. V. Singh, 2011, Fatigue behavior and crack growth rate of cryorolled Al 7075 alloy, Mater. Sci. Eng. A, Vol. 528, pp. 7124-7132. https://doi.org/10.1016/j.msea.2011.05.021
C. E. Campbell, L. A. Bendersky, W. J. Boettinger, R. Ivester, 2006, Microstructureal characterization of Al7075-T6 chips and work pieces probused by high-speed machining, Mater. Sci. Eng. A, Vol. 430, pp. 15-26. https://doi.org/10.1016/j.msea.2006.04.122
T. J. Harrison, B. R. Crawford, M. Janardhana, G. Clark, 2011, Differing microstructural properties of 7075-T6 sheet and 7075-T651 extruded aluminium alloy, Procedia Eng. Vol. 10, pp. 3117-3121. https://doi.org/10.1016/j.proeng.2011.04.516
H. W. Park, D. H. Kim, S. Y. Shim, H. K. Kim, B. H. Seong, C. O. Choi, S. G. Lim, 2011, The effect of Ca adiition on the grain growth inhibition during reheating process of Al-Zn-Mg Al alloys for thixe-xtrustion. Korea Foundry Soc., Vol. 31, pp. 347-353. https://doi.org/10.7777/jkfs.2011.31.6.347
A. D. Isadare, B. Aremo, M. O. Adeoye, O. J. Olawale, M. D. Shittu, 2013, Effect of heat treatment on some mechanical properties of 7075 aluminium alloy, Mater. Res., Vol. 16, No. 1, pp. 190-194. http://doi.org/ 10.1590/S1516-14392012005000167
H. G. Jian, F. Jiang, K. Wen, L. Jiang, H. F. Huang, L. L. WEI, 2009, Fatigue fracture of high-strength Al-Zn-Cu alloy, Trans. Nonferrous Met. Soc., Vol. 19, pp. 1031-1036. https://doi.org/10.1016/S1003-6326(08)60402-1
J. F. Li, Z. W. Peng, C. X. Li, Z. Q. Jia, W. J. Chen, Z. Q. Zheng, 2008, Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments, Trans. Nonferrous Met. Soc. China, Vol. 18, No. 4, pp. 755-762. https://doi.org/10.1016/S1003-6326(08)60130-2
G. L. Huang, D. K. Matlock, G. Krauss, 1989, Martensite formation, strain rate sensitivity, and deformation behavior of type 304 stainless steel sheet. Metall. Trans. A, Vol. 20, No. 7, pp. 1239-1246. https://doi.org/10.1007/BF02647406
R.H. Oskouei, R.N. Ibrahim, 2011, Restoring the tensile properties of PVD-TiN coated Al 7075-T6 using a post heat treatment, Surf. Coat. Tech., Vol. 15, No. 25, pp. 3967-3973. https://doi.org/10.1016/j.surfcoat.2011.02.041
K. Mohan, J. A. Suresh, Palaniappan Ramu and R. Jayaganthan, 2016, Microstructure and Mechanical Behavior of Al 7075-T6 Subjected to Shallow Cryogenic Treatment, J. Mater. Eng. Perf., Vol. 25, pp. 2185-2194. https://doi.org/10.1007/s11665-016-2052-1
P. S. Prevey, J. T. Cammett, 2004, The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T6, Int. J. Fatigue, Vol. 26, No. 9, pp. 975-982. https://doi.org/10.1016/j.ijfatigue.2004.01.010
L.R. Krishna, Y. Madhavi, T. Sahithi, D.S. Rao, V.S. Ijeri, O. Prakash, S.P. Gaydos, 2019, Enhancing the high cycle fatigue life of high strength aluminum alloys for aerospace applications, Fatigue Fract. Eng. Mater. Struct. Vol. 42, No. 3, pp. 698-709. https://doi.org/10.1111/ffe.12944
Y. Yang, D.H. Li, H.G. Zheng, X.M. Li, F. Jiang, 2009, Self-organization behaviors of shear bands in 7075 T73 and annealed aluminum alloy, Mater. Sci. Eng. A, Vol. 527, No. 1-2, pp. 344-354. https://doi.org/10.1016/j.msea.2009.08.032
B. P. Rairand, B. A. Wilcox, W. J. Gallagher, D. N. Williams, 1972, Laser shock-induced microstructural and mechanical property changes in 7075 aluminum, J. Appl. Phys., Vol. 43, No. 9, pp. 3893-3895. https://doi.org/10.1063/1.1661837
T. S. Shih, T. H. Lee, Y. J. Jhou, 2014, The effects of anodization treatment on the microstructure and fatigue behavior of 7075-T76 aluminum alloy, Mater. Trans., Vol. 55, pp. 1280-1285. http://doi.org/10.2320/matertrans.M2014121
T. Gao, Z. Sun, H. Xue, D. Retraint, 2020, Effect of surface mechanical attrition treatment on high cycle and very high cycle fatigue of a 7075-T6 aluminium alloy, Int. J. Fatigue, 139 105798-105811. https://doi.org/10.1016/j.ijfatigue.2020.105798
R. H. Oskouei, R. N. Ibrahim, 2011, The effect of a heat treatment on improving the fatigue properties of aluminium alloy 7075-T6 coated with TiN by PVD, Proced. Eng., Vol. 10, pp. 1936-1942. http://doi.org/10.1016/j.proeng.2011.04.321
T. P. Savas, J. C. Earthman, 2014, Fatigue crack nucleation studies on sulfuric acid anodized 7075-T73 aluminum, J. Mater. Eng. Perform., Vol. 23, No. 6, pp. 2131-2138. https://doi.org/10.1007/s11665-014-1000-1
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.