본 연구에서는 NBR 고무의 물성을 향상시키기 위해서 충진재의 함량 조절 및 복합화를 통한 가황고무의 기계적 특성에 대해 실험하였다. 충진재는 내열성이 우수하다고 알려진 아라미드 섬유와 유리 섬유를 사용하였고, 상호보완 효과를 기대하여 세라믹을 적용하였으며, 적용된 세라믹 재료는 형상에 따라 침상구조의 세라믹과 판상구조의 세라믹을 적용하였다. 각 충진재의 기초 물성 조사를 위해 각 충진재는 5.0, 10.0, 15.0, 20.0 phr의 양으로 사용되었으며, 증량에 따른 물리적 특성을 비교 및 분석하였다. 세라믹 적용을 통한 상호 보완 효과를 확인하기 위해 각 10.0 phr 섬유와 세라믹을 1 : 1 복합 충진하여 기계적 물성 특성에 관한 평가를 하였다. 그 결과, 충진재 단독적용의 경우 아라미드 섬유, 침상 세라믹, 유리 섬유, 판상 세라믹 순으로 열 노화 후 인장강도 감소율이 작은 것으로 확인되었다. 또한 섬유와 세라믹 기반의 복합 충진재가 적용된 가황고무의 기계적 특성을 평가하였으며, 복합 충진재가 열 노화에 대한 상호보완 효과를 가지는 것을 확인하였다.
본 연구에서는 NBR 고무의 물성을 향상시키기 위해서 충진재의 함량 조절 및 복합화를 통한 가황고무의 기계적 특성에 대해 실험하였다. 충진재는 내열성이 우수하다고 알려진 아라미드 섬유와 유리 섬유를 사용하였고, 상호보완 효과를 기대하여 세라믹을 적용하였으며, 적용된 세라믹 재료는 형상에 따라 침상구조의 세라믹과 판상구조의 세라믹을 적용하였다. 각 충진재의 기초 물성 조사를 위해 각 충진재는 5.0, 10.0, 15.0, 20.0 phr의 양으로 사용되었으며, 증량에 따른 물리적 특성을 비교 및 분석하였다. 세라믹 적용을 통한 상호 보완 효과를 확인하기 위해 각 10.0 phr 섬유와 세라믹을 1 : 1 복합 충진하여 기계적 물성 특성에 관한 평가를 하였다. 그 결과, 충진재 단독적용의 경우 아라미드 섬유, 침상 세라믹, 유리 섬유, 판상 세라믹 순으로 열 노화 후 인장강도 감소율이 작은 것으로 확인되었다. 또한 섬유와 세라믹 기반의 복합 충진재가 적용된 가황고무의 기계적 특성을 평가하였으며, 복합 충진재가 열 노화에 대한 상호보완 효과를 가지는 것을 확인하였다.
In this study, the mechanical properties of vulcanized rubber were evaluated through compounding by controlling filler content to improve the mechanical properties of NBR rubber. Aramid and glass fibers with excellent heat resistance were used as fillers, and ceramics were additionally used in antic...
In this study, the mechanical properties of vulcanized rubber were evaluated through compounding by controlling filler content to improve the mechanical properties of NBR rubber. Aramid and glass fibers with excellent heat resistance were used as fillers, and ceramics were additionally used in anticipation of a complementary effect, and as for the ceramic materials, needle-shaped and plate-shaped ceramics were used. Each filler was used in an amount of 5.0, 10.0, 15.0, and 20.0 phr in order to investigate the basic properties according to the amount of filler. To confirm the complementary effect through ceramic application, each 10.0 phr fiber and ceramic were mixed with 1:1 ratio to evaluate mechanical properties. As a result, it was confirmed that the decreasing ratio of tensile strength after heat aging was small in the order of aramid fiber, acicular ceramic, glass fiber, and plate ceramic in the case of applying the filler alone. In addition, the mechanical characteristics of vulcanized rubber using composite filler based on fibers and ceramics were evaluated, and it was confirmed that the composite filler had a complementary effect on thermal aging.
In this study, the mechanical properties of vulcanized rubber were evaluated through compounding by controlling filler content to improve the mechanical properties of NBR rubber. Aramid and glass fibers with excellent heat resistance were used as fillers, and ceramics were additionally used in anticipation of a complementary effect, and as for the ceramic materials, needle-shaped and plate-shaped ceramics were used. Each filler was used in an amount of 5.0, 10.0, 15.0, and 20.0 phr in order to investigate the basic properties according to the amount of filler. To confirm the complementary effect through ceramic application, each 10.0 phr fiber and ceramic were mixed with 1:1 ratio to evaluate mechanical properties. As a result, it was confirmed that the decreasing ratio of tensile strength after heat aging was small in the order of aramid fiber, acicular ceramic, glass fiber, and plate ceramic in the case of applying the filler alone. In addition, the mechanical characteristics of vulcanized rubber using composite filler based on fibers and ceramics were evaluated, and it was confirmed that the composite filler had a complementary effect on thermal aging.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.