참고문헌 (19)

1. Construction Economy Research Institute of Korea. (2010). Studies on quality improvement and stable supply and demand for aggregates, Ministry of Land, Infrastructure and Transport. 

2. Yu, M., Lee, J., & Chung, C. (2009). The property estimation of fine aggregate blended with natural, crushed, and recycled fine aggregate, Journal of the Architectural Institute of Korea Structure & Construction Section, 25(11), 113-120. 

3. So, S. (2004). A study on the thermal insulation property of concrete composites using light-weight aggregate. Journal of the Korea Institute of Building Construction, 4(3), 93-100. 

   원문보기 상세보기

4. Choi, J., Ha, J., Na, O., & Han, S. (2017). Construction application of lightweight aggregate concrete in japan, Magazine of Korean Recycled Construction Resource Institute, 12(3), 28-32. 

5. Neville, A. (2011). Properties of concrete(5th edition), Harlow, England, Pearson Education Limited. 

6. Cui, H., Lo, T., Memon, S., & Xu, W. (2012). Effect of lightweight aggregate on the mechanical properties and brittleness of lightweight aggregate concrete, Construction and Building Materials, 35, 149-158. 

   상세보기

7. Kwon, D., Kim, S., Jeon, H., Kim, S., & Seo, C. (2012). A study on the characteristic of lightweight aggregate concrete in before and after pressurization by the amount of contained water in lightweight aggregate, Journal of the Architectural Institute of Korea Structure & Construction Section, 28(8), 121-128. 

8. Chandra, S., & Berntsson, L. (2002). Lightweight aggregate concrete (science, technology, and applications), Noyes Publications, NY, USA. 

9. Kim, Y., & Jang, C. (2011). Production technology, property and application of artificial lightweight aggregates, Magazine of the Korea Concrete Institute, 23(5), 14-17. 

   원문보기 상세보기

10. Sim, J., & Yang, K. (2012). Influence of specimen geometries on the compressive strength of lightweight aggregate concrete, Journal of the Concrete Institute, 24(3), 333-340. 

11. KDS 41 10. (2016). Korean building code, Korea Construction Standard Center. 

12. KS F 2402, F 2405, F 2408, F 2409, F 2423, F 2441, F 2527, & L 5201. (2016). Concrete aggregate, Korean Industrial Standards, Chungcheongbuk-do, Korea. 

13. Jung, Y., Lee, S., & Yoon, Y. (2005). The influence of fineness modulus of fine aggregate and grain shape of coarse aggregate on the properties of high flowing concrete, Journal of the Korea Concrete Institute, 17(5), 785-792. 

14. Yang, K. (2013). Mix design of lightweight aggregate concrete and determination of targeted dry density of concrete, Journal of the Korea Institute of Building Construction, 13(5), 491-497. 

    원문보기 상세보기

15. Sim, J., & Yang, K. (2010). Air content, workability and bleeding characteristics of fresh lightweight aggregate concrete, Journal of the Korea Concrete Institute, 22(4), 559-566. 

    원문보기 상세보기

16. KSC 14 20 20. (2016). Lightweight aggregate concrete, Korea Construction Standard Center. 

17. Oh, Y. (2010). The influence of fineness modulus of fine aggregate on the quality characteristics of concrete according to mixing method, Master's thesis, Pusan National University. 

18. Sim, J., & Yang, K. (2011). Mechanical properties of lightweight aggregate concrete according to the substitution rate of natural sand and maximum aggregate size, Journal of the Korea Concrete Institute, 23(5), 551-558. 

    원문보기 상세보기

19. Kim, M. (2015). Prediction of bond stress-slip behavior for reinforced concrete members, Ph.D. dissertation, Kongju National University. 

저자의 다른 논문 :

양근혁 (142)