최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기열처리공학회지 = Journal of the Korean society for heat treatment, v.34 no.2, 2021년, pp.66 - 74
조평석 (순천대학교 신소재공학과) , 윤창석 ((주) 디엠티) , 황효운 (순천대학교 신소재공학과) , 이동근 (순천대학교 신소재공학과)
Cladding material, which can selectively obtain excellent properties of different metals, is a composite material that combines two or more types of dissimilar metals into one plate. The titanium-copper cladding material between titanium which has excellent corrosion resistance and copper which has ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ho-Jeong Kim, A Study on Air Pollution and Greenhouse Gas Reduction by Construction of Industrial Complex Waste Heat Exchange Network, Doctoral dissertation, Suwon University, 2012.
Kuznicka, Erosion-corrosion of heat exchanger tubes, Institute of Materials Science and Applied Mechanics, Wroclaw University of Technology, 50-370 Wroclaw, Poland.
C. G. Munger and L. D. Vincent, Corrosion Prevention By Protective Coatings, 2nd ed., NACE, Houston, 1999.
R. J. Brodd and V. E. Leger, Encyclopedia of Electrochemistry of the Elements, A. J. Bard, Editor, Marcel Decker Inc., New York, 1976.
T. K. Ross and J. Lingard : Met. Finish., 40 (1983) 186.
Yang-Kyun Park, Mechanical & Chemical Properties of Ti-Cu Clad Sheet by Cladding Method, Paper of masters degree, Materials Metallurgical Engineering, Sunchon National University, Suncheon 57922, Republic of Korea, 2018.
B. Y. Kang, H. J. Kim : The Basic Theory and Characteristics of Explosive Welding, J. Welding and Joining, 11 (1993) 1.
Kyung-Man Moon, Yun-Hae Kim, Jong-Do Kim, Myung-Hoon Lee and Jin-Gyeong Kim, Electrochemical Evaluation of Corrosion Property of Welding Zone of 304 Stainless Steel, THe Korean Society of Ocean Engineers, Vol. 23, No. 4, pp58-63, Aug, 2009 (LSSN 1225-0767).
Dong-Geun Lee, Yong Tai Lee, High Efficiency Welding Technology of Titanium Alloy, The Korean Welding and Joining Society, Vol. 25, No. 5, Oct 2007.
In-Cheol Jung, Young-Jae Kim, Kyeong-Woon Lee, Deok-Nam Sim, The Comparison of Characteristic between Electron Beam Welding and Narrow-gap TIG welding with 316LN Stainless Steel, The Korean Welding and Joining Society, 44, 2005.6, 82-84(3 pages).
Yong-Gir Kim, Dong-Seok Chung, Cha-Hurn Bae, The Influence of Welding Conditions on Mechanical Properties and Microstructural Change of TIG Welded Joint in Stress Relief Heat Treated Mg-AZ31B Alloy, J. of the Korean Society for Heat Treatment, Vol. 17, No. 4, (2004) pp. 230-235.
YOSHIAKI IIJMA, KAZUTOMO HOSHINO and KEN-ICHI HIRANO, Diffusion of Titanium in Copper, Metall. Trans. A8A (1977) 997-1001.
Chang-Suk Youn, Dong-geun Lee, Effects of Post Heat Treatment on the Mechanical Properties of Cold-Rolled Ti/Cu Clad Sheet, Metals 2020, 10, 1672; doi:10.3390/met10121672
Woo-Hyun Song, Dong-Han Seo and Jang-Yong Yoo, Development Trend of Linepipe Steel and It's Weldability, Journal of KWJS, Vol. 27, No. 1, February, 2009.
Ki-Weon Kang, Byung-Jei Lee, Kyung-Young Jang, Jung-Kyu Kim, Failure analysis and evaluation of strength properties on brazed joints, The Korean Society of Mechanical Engineers, 2005, 94-99 (6pages).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.