최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.37 no.3, 2021년, pp.5 - 17
전병곤 ((주)태림기술) , 김지성 (전주비전대학교 지적토목학과) , 강기천 (경상국립대학교 공과대학 토목공학과)
This study aims to investigate the causes and countermeasures for the occurrence of tension cracks in the slope of the rock mass of heavy equipment for road construction. Electric resistivity survey was performed to investigate the expandable tensile crack range. As a result of examining the distrib...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Barton, N. R. (1971), A Model Study of the Behaviour of Excavated Slopes, Ph.D. Thesis, University of London, Imperial College of Science and Technology, p.520.
Duncan C. Wyllie and Christoper W. Mah. (2005), Rock Slope Engineering, Spon Press, p.131.
Hoek, E. and Bray, J. D. (1974), Rock Slope Engineering, CRC Press, p.368.
Kim, Y. J., Lee, Y. H., Kim, S. K., and Kim, J. H. (2006), "Case Study on Failure of Rock Slope Caused by Filling Material of Caly", Journal of Korea Society for Rock Mechanics, Vol.16, No.5, pp.368-376.
Korea Expressway Corporation (2017), Design Reports the Daegu Outer Ring Expressway.
Lee, H. J., Kim, C. H., Hawang, W. K., and Kim, T. H. (2019), "Characteristic Analysis of Shear Strength of Rock Slope Discontinuity in Yangsan Fault System", J. Korea Geosynthetics Society, Vol.18, No.3, pp.11-22.
Lee, S. H. and Kim, S. J. (2004), "Weathering Characteristics of Sedimentary Rocks Affected by Periodical Submerging", Journal of Mineralogical Societ of Korea, Vol.17, No.1, pp.23-35.
Ministry of Land, Infrastructure and Transport (2016), Criteria for embankment and cutting design, Korea design standard (KDS 11 70 05).
Park, H. D. (2002), "Engineering Geological Properties of Mudstone and Shale", Proc. of the seminar and field workshop for mudstone and shale, organized by the Korean Geotechnical Society for Rock Mechanics Commission, pp.18-30.
Prist, S. D. (1992), Discontinuity Analysis Rock Engineering, Chapman & Hall, London, Vol.228, No.13, pp.39-49.
Shin, H. (2020), "Numerical Verification for Plane Failure of Rock Slopes Using Implicit Joint-Continuum Model", Journal of the Korean Geotechnical Society, Vol.36, No.12, pp.125-132.
Son, M., Kim , I. S., Lee, D. H., Lee, J. D., Kim , J. S., and Park, I. S. (2000), "Geological Characteristics in the Eastern Part of the Ulsan Fault Area, Korea : Structural Geology and Anisotropy of Magnetic Susceptibility (AMS) in the Tertiary Miocene Waup Basin", Journal of the Geological Society of Korea, Vol.36, No.3, pp. 195-216.
You, B. O. (2002), "Assumption of Shear Strength on Failed Discontinuities Due to Back Analysis", Proc. of fall conference of the Korean Geotechnical Society, pp.213-22.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.