최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the Korean Recycled Construction Resources Institute = 한국건설순환자원학회 논문집, v.9 no.1, 2021년, pp.41 - 49
오상우 (중앙대학교 토목공학과) , 홍근태 (중앙대학교 토목공학과) , 최성철 (중앙대학교 건설환경플랜트공학과)
3D printing techniques have been recently adopted in the construction industry. It mainly utilizes additive manufacturing which is the fabrication process depositing successive layers of materials without any formworks. Conventional cementitious materials may not be directly applicable to 3D printin...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Banfill, P.F.G. (1990). Rheology of Fresh Cement and Concrete: Proceedings of an International Conference, Liverpool, 1990. CRC Press.
Barnes, H.A. (2000). A Handbook of Elementary Rheology.
Barnes, H.A., Hutton, J.F., Walters, K. (1989). An Introduction to Rheology, 3, Elsevier.
Beaupre, D. (1994). Rheology of High Performance Shotcrete, Ph.d Thesis, University of British Columbia.
Buswell, R.A., De Silva, W.L., Jones, S.Z., Dirrenberger, J. (2018). 3D printing using concrete extrusion: a roadmap for research, Cement and Concrete Research, 112, 37-49.
Chen, M., Yang, L., Zheng, Y., Huang, Y., Li, L., Zhao, P., Wang, S., Lu, L., Cheng, X. (2020). Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up, Construction and Building Materials, 252, 119090.
Chidiac, S.E., Habibbeigi, F. (2005). Modelling the rheological behaviour of fresh concrete: an elasto-viscoplastic finite element approach, Computers and Concrete, 2(2), 97-110.
Cho, S., Kruger, P.J., Zeranka, S., van Zijl, G.P.A.G. (2018). 3D printalbe concrete technology and mechanics. In Proceedings of the 19th Annual International RAPDASA Conference, 7-9.
Chua, C.K., Leong, K.F. (2014). 3D Printing and Additive Manufacturing: Principles and Applications(with Companion Media Pack) of Rapid Prototyping Fourth Edition, World Scientific Publishing Company.
De Larrard, F., Ferraris, C.F., Sedran, T. (1998). Fresh concrete: a herschel-bulkley material, Materials and structures, 31(7), 494-498.
Dolz, M., Hernandez, M.J., Pellicer, J., Delegido, J. (1995). Shear stress synergism index and relative thixotropic area, Journal of pharmaceutical sciences, 84(6), 728-732.
Dressler, I., Freund, N., Lowke, D. (2020). The effect Of accelerator dosage on fresh concrete properties and on interlayer strength in shotcrete 3D printing, Materials, 13(2), 374.
Fares, G., Khan, M.I. (2019). Rheology and Its relation to strain-hardening properties of strain-hardening cement-based composites, ACI Materials Journal, 116(5).
Ferraris, C.F. (1999). Measurement of the rheological properties of high performance concrete: state of the art report, Journal of Research of the National Institute of Standards and Technology, 104(5), 461.
Feys, D., Verhoeven, R., De Schutter, G. (2008). Fresh self compacting concrete, a shear thickening material, Cement and Concrete Research, 38(7), 920-929.
Feys, D., Verhoeven, R., De Schutter, G. (2009). Why is fresh self-compacting concrete shear thickening?, Cement and concrete Research, 39(6), 510-523.
Jo, J.H., Jo, B.W., Cho, W., Kim, J.H. (2020). Development of a 3D printer for concrete structures: laboratory testing of cementitious materials, International Journal of Concrete Structures and Materials, 14(1), 1-11.
Jolin, M., Burns, D., Bissonnette, B., Gagnon, F., Bolduc, L.S. (2009). Understanding the Pumpability of Concrete.
Kazemian, A., Yuan, X., Cochran, E., Khoshnevis, B. (2017). Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture, Construction and Building Materials, 145, 639-647.
Khalil, N., Aouad, G., El Cheikh, K., Remond, S. (2017). Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars, Construction and Building Materials, 157, 382-391.
Khayat, K.H., Saric-Coric, M., Liotta, F. (2002). Influence of thixotropy on stability characteristics of cement grout and concrete, Materials Journal, 99(3), 234-241.
Koehler, E.P., Fowler, D.W. (2004). Development of a Portable Rheometer for Fresh Portland Cement Concrete.
Kruger, J., Zeranka, S., van Zijl, G. (2019). 3D concrete printing: a lower bound analytical model for buildability performance quantification, Automation in Construction, 106, 102904.
Le, T.T., Austin, S.A., Lim, S., Buswell, R.A., Gibb, A.G., Thorpe, T. (2012). Mix design and fresh properties for high-performance printing concrete, Materials and Structures, 45(8), 1221-1232.
Li, Z., Hojati, M., Wu, Z., Piasente, J., Ashrafi, N., Duarte, J.P., ... Radlinska, A. (2020). Fresh and hardened properties of extrusion-based 3D-printed cementitious materials: a review, Sustainability, 12(14), 5628.
Lootens, D., Jousset, P., Martinie, L., Roussel, N., Flatt, R.J. (2009). Yield stress during setting of cement pastes from penetration tests, Cement and Concrete Research, 39(5), 401-408.
Ma, G., Li, Z., Wang, L. (2018). Printable properties of cementitious material containing copper tailings for extrusion based 3D printing, Construction and building materials, 162, 613-627.
Malaeb, Z., AlSakka, F., Hamzeh, F. (2019). 3D concrete printing: machine design, mix proportioning, and mix comparison between different machine setups, 3D Concrete Printing Technology, 115-136.
Moller, P.C., Mewis, J., Bonn, D. (2006). Yield stress and thixotropy: on the difficulty of measuring yield stresses in practice, Soft Matter, 2(4), 274-283.
Nair, S.A., Alghamdi, H., Arora, A., Mehdipour, I., Sant, G., Neithalath, N. (2019). Linking fresh paste microstructure, rheology and extrusion characteristics of cementitious binders for 3D printing, Journal of the American Ceramic Society, 102(7), 3951-3964.
Nerella, V.N., Mechtcherine, V. (2019). Studying the printability of fresh concrete for formwork-free concrete onsite 3D printing technology(CONPrint3D), 3D Concrete Printing Technology, 333-347.
Panda, B., Noor Mohamed, N.A., Paul, S.C., Bhagath Singh, G.V.P., Tan, M.J.,Savija, B. (2019). The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete, Materials, 12(13), 2149.
Panda, B., Paul, S.C., Mohamed, N.A.N., Tay, Y.W.D., Tan, M.J. (2018). Measurement of tensile bond strength of 3D printed geopolymer mortar, Measurement, 113, 108-116.
Panda, B., Unluer, C., Tan, M.J. (2018). Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing, Cement and Concrete Composites, 94, 307-314.
Paul, S.C., Tay, Y.W.D., Panda, B., Tan, M.J. (2018). Fresh and hardened properties of 3D printable cementitious materials for building and construction, Archives of Civil and Mechanical Engineering, 18, 311-319.
Paul, S.C., van Zijl, G.P., Tan, M.J., Gibson, I. (2018). A review of 3D concrete printing systems and materials properties: current status and future research prospects, Rapid Prototyping Journal.
Perrot, A., Rangeard, D., Pierre, A. (2016). Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Materials and Structures, 49(4), 1213-1220.
Roussel, N. (2006). A thixotropy model for fresh fluid concretes: theory, validation and applications, Cement and concrete research, 36(10), 1797-1806.
Roussel, N., Ovarlez, G., Garrault, S., Brumaud, C. (2012). The origins of thixotropy of fresh cement pastes. Cement and Concrete Research, 42(1), 148-157.
Rubio, M., Sonebi, M., Amziane, S. (2017). 3D printing of fibre cement-based materials: fresh and rheological performances, Academic Journal of Civil Engineering, 35(2), 480-488.
Rushing, T.S., Stynoski, P.B., Barna, L.A., Al-Chaar, G.K., Burroughs, J.F., Shannon, J.D., ... Case, M.P. (2019). Investigation of concrete mixtures for additive construction, 3D Concrete Printing Technology, 137-160.
Schwartzentruber, L.A., Le Roy, R., Cordin, J. (2006). Rheological behaviour of fresh cement pastes formulated from a self compacting concrete(SCC), Cement and Concrete Research, 36(7), 1203-1213.
Soltan, D.G., Li, V.C. (2018). A self-reinforced cementitious composite for building-scale 3D printing, Cement and Concrete Composites, 90, 1-13.
Standard, A.S.T.M. (2013). F2792-12a: standard terminology for additive manufacturing technologies (ASTM International, West Conshohocken, PA, 2012).
P. Jain, AM Kuthe, Feasibility Study of Manufacturing Using Rapid Prototyping: FDM Approach, Procedia Eng, 63, 4-11.
Tattersall, G.H. (1991). Workability and Quality Control of Concrete, CRC Press.
Ukraincik, V. (1980). Study of fresh concrete flow curves, Cement and Concrete Research, 10(2), 203-212.
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., ... Flatt, R. (2016). Digital concrete: opportunities and challenges. RILEM Technical Letters, 1, 67-75.
Yim, H.J., Kim, J.H. (2014). Physical characterization of cementitious materials on casting and placing process, Materials, 7(4), 3049-3064.
Young, J.F., Mindess, S., Darwin, D. (2002). Concrete, Prentice Hall.
Zareiyan, B., Khoshnevis, B. (2018). Effects of mixture ingredients on extrudability of concrete in Contour Crafting, Rapid Prototyping Journal.
Zhang, Y., Zhang, Y., Liu, G., Yang, Y., Wu, M., Pang, B. (2018). Fresh properties of a novel 3D printing concrete ink, Construction and Building Materials, 174, 263-271.
Zhang, Y., Zhang, Y., She, W., Yang, L., Liu, G., Yang, Y. (2019). Rheological and harden properties of the high-thixotropy 3D printing concrete, Construction and Building Materials, 201, 278-285.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.