최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Resources recycling = 자원리싸이클링, v.30 no.1, 2021년, pp.60 - 65
채지광 (전북대학교 신소재공학부) , 유수환 (전북대학교 신소재공학부) , 오정민 (전북대학교 신소재공학부) , 임재원 (전북대학교 신소재공학부)
The recycling of titanium turning scraps requires the removal of cutting oil and other contaminants remaining on the surface. In this study, an experiment was conducted in which titanium scraps were cleaned by a combination of ultrasonic immersion-steam cleaning and subsequent drying at high tempera...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
G. Lutjering, J.C. Williams, 2007 : Traditional and Emerging Applications, Titanium (Engineering Materials and Processes), pp.8-11, 2nd Edition, Springer, Berlin.
J. Lu, Y. Zhang, W. Huo, et al., 2018 : Electrochemical corrosion characteristics and biocompatibility of nano-structured titanium for implants, Appl. Surf. Sci., 434, pp.63-72
H. Asgar, K.M. Deen, Z.U. Rahman, et al., 2019 : Functionalized graphene oxide coating on Ti6Al4V alloy for improved biocompatibility and corrosion resistance, Mater. Sci. Eng., C 94, pp.920-928
Korea Customs Service, Trade Statistics, https://unipass.customs.go.kr
T.E. Norgate, S. Jahanshahi, W.J. Rankin, 2007 : Assessing the environmental impack of metal production processes, J. Clean. Prod., 15, pp.838-848
J. Reitz, C. Lochbichler, B. Friedrich, 2011 : Recycling of gamma titanium aluminide scrap from investment casting operations, Intermetallics, 19, pp.762-768
K. Topolski, W. Bochniak, M. Lagoda, et al., 2017 : Structure and properties of titanium produced by a new method of chip recycling, J. Mater. Process. Technol., 248, pp.80-91
J.M. Oh, K.H. Heo, W.B. Kim, et al., 2013 : Sintering properties of Ti-6Al-4V alloys prepared using Ti/TiH 2 powders, Mater. Trans., 54, pp.119-121
Osamu Takeda, Toru H. Okabe, 2019 : Current Status of Titanium Recycling and Related Technologies, JOM, 71, pp.1981-1990.
Kurdyukov, V. A., A. A. Sergeev, and A. A. Reznyakov., 1997 : Efficient methods of processing metal chips, Metallurgist, 41, pp.331-335.
S. C. Lim, D. H. Kim, E. P. Yoon, et al., 1997 : Decomposition kinetics of machining oil and oxidation of A356.2 aluminium alloy in aluminium recycling process, Mater. Sci. Technol., 13, pp.859-864
Jirang Cui, Anne Kvithyld, Hans Jorgen Roven, 2010 : Degreasing of aluminum turnings and implications for solid state recycling [C], In: TMS Annual Meeting, Seattle. pp. 675-678.
S. Y. Park, J. H. Song, 2018, KR, 10-1850967.
J. Chae, J. M. Oh, J. W. Lim, et al., 2019 : Eco-Friendly Pretreatment of Titanium Turning Scraps and Subsequent Preparation of Ferro-Titanium Ingots. Korean J. Met. Mater., 57(9), pp.569-574.
A.F. Stalder, G. Kulik, D. Sage, et al., 2006 : A Snake-Based Approach to Accurate Determination of Both Contact Points and Contact angles, Colloids Surf. A Physicochem. Eng. Asp., 286(1-3), pp.92-103
Carlos Drummond, Jacob Israelachvili, 2002 : Surface forces and wettability, J. Pet. Sci. Eng., 33, pp.123-133
Jean C. Childers, 2006 : The Chemistry of Metalworking Fluids, Metalworking Fluids, 2nd Edition, Jerry P. Byers, pp.133, Taylor & Francis, New York.
Milton J. Rosen, 2004 : Surfactants and Interfacial Phenomena, pp.53, 3rd Edition, Wiley, New Jersey.
ASTM B977/B977M-19, Standard Specification for Titanium and Titanium Alloy Ingots.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.