최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기터널과 지하공간: 한국암반공학회지 = Tunnel and underground space, v.31 no.6, 2021년, pp.623 - 646
김병렬 (한국석회석신소재연구소) , 이현우 (강원대학교 신산업개발T-EMS융합전공) , 김영진 (한국석회석신소재연구소) , 조계홍 (한국석회석신소재연구소) , 최성웅 (강원대학교 에너지.자원공학전공 및 신산업개발T-EMS융합전공)
As the demand for electric power increases with acceleration of electrification at home and abroad, the needs for coal-fired electrical power plant are accordingly increased. However, these coal-fired electrical power plants induce also many environmental problems such as increase of air pollutants,...
ACI, 2005, Controlled Low-Strength Materials, ACI Committee 229, 1-15.
ASTM, 2017, Standard Test Method for Flow Consistency of Controlled Low Strength Material(CLSM), ASTM D6103/D6103M ASTM International, West Conshohocken, PA.
Bang, K.M. and Chon, H.T., 2004, A Study on the Ground Reinforcement against Land Subsidence in Abandoned Coal Mine Areas, Journal of the Korean Society of Mineral and Energy Resources Engineers, 41, 4, 319-326.
Barton, N. and Choubey, V., 1977, The Shear Strength of Rock Joints in Theory and Practice, Rock Mechanics, 10, 1-54.
Cho, B.D., Kim, S.H. and Jeon, S.J., 2014, Assessment of Bond Characteristics between New and Old Concrete in Various Mixtures and Joint Conditions, J. of Korea Concrete Insitute, 26, 4, 507-515.
Dawei, H., Oriol, P. and Albert A., 2020, Bond Strength Tests under Pure Shear and Tension between Masonry and Sprayed Mortar, MDPI, Materials, 13, 2183, 1-19.
Gratchev, I. and Kim, D.H., 2016, On the Reliability of The Strength Retention Ratio for Estimating the Strength of Weathered Rocks, Engineering Geology, 201, 1-5.
Helinski, M., 2007, Mechanics of Mine Backfill, PhD Thesis, Western Australia University.
Helinski, M., Fahey, M. and Fourie, A., 2010, Behavior of Cemented Paste Backfill in Two Mine Stopes: Measurements and Modeling, J. of Geotechnical and Geoenvironmental Engineering, 137, 2, 171-182.
Itasca Consulting Group Inc., 2012, FLAC3D Manual, Version 5.0, Minneapolis, MN, USA.
Jang, H.S., Kang, S.S. and Jang, B.A., 2014, Determination of Joint Roughness Coefficients Using Roughness Parameters, Rock Mechanics and Rock Engineering, 47, 6, 2061-2073.
Kim, H.S., 2001, Experimental study on bond strength of interface between old concrete and new concrete, Daelim technical review, 12, 4-8.
KSA, 2010, Standard Test Method for Compressive Strength of Concrete, KS F 2405, Seoul, Korea.
KSA, 2017, Practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency, KS L 5109, Seoul, Korea.
Kwon, M.H., Choi, S.O. and Kim, C.O, 2016, A Study on Stability Analysis of Large Underground Limestone Openings considering Excavation Damaged Zone, Tunnel and Underground Space, 26, 2, 131-142.
Lee, S.D. and Jeon, S.W., 2017, A Study on the Roughness Measurement for Joints in Rock Mass Using LiDAR, Tunnel and Underground Space, 27, 1, 58-68.
Liu, G., Li, L., Yang, X. and Guo, L., 2016, Numerical Analysis of Stress Distribution in Backfilled Stopes Considering Interfaces between the Backfill and Rock Walls, International Journal of Geomechanics, 17, 2, 1-9.
Masniyom, M., 2009, Systematic Selection and Application of Backfill in Underground Mines, PhD Thesis, Technischen University Bergakademie Freiberg.
Ministry of trade, industry and energy, 2015, 7th Basic Plan on Electricity Demand and Supply, Sejong, Korea.
Mishra, M. and Karanam, U., 2006, Grotechnical Characterization of Fly Ash Composites for Backfilling Mine Voids, Geotech. Geol. Eng., 24, 6, 1749-1765.
Moon, H.Y. and Yu, J.H., 2000, A Study on the Fundamental Properties of Mortar with Pig-iron Steel Slag Fine Aggregate, KSCE Journal of Civil Engineering, 1, 403-409.
Muralha, J., Grasselli, G., Tatone, B., Blumel, M., Chryssanthakis, P. & Jiang, Y., 2014, ISRM Suggested Method for Laboratory Determination of the Shear Strength of Rock Joints: Revised Version, Rock Mechanics and Rock Engineering, 47, 291-302.
Myers, N., 1962, Characterization of Surface Roughness, Wear, 5, 3, 182-189.
Park, B.Y. and Kwon, S.K., 2000, Current Status of the Characterization of the Rock Joint Surface, Tunnel and Underground Space, 10, 4, 566-579.
Sheshpari, M., 2015, A Review of Underground Mine Backfilling Methods with Emphasis on Cemented Paste Backfill, Electronic Journal of Geotechnical Engineering, 20, 13, 5183-5208.
Sivakugan, N., Veenstra, R. and Nahuleswaran, N., 2015, Underground Mine Backfilling in Australia Using Paste Fills and Hydraulic Fills, Int. J. of Geosynth. and Ground Eng., 1, 18, 1-7.
Tesarik, D., Seymour, J. and Yanske, T., 2009, Long-term Stability of a Backfilled Room-and-Pillar Test Section at the Buick Mine, Missouri, USA, International Journal of Rock Mechanics & Mining Sciences, 46, 1182-1196.
Walske, M., 2014, An Experimental Study of Cementing Paste Backfill, PhD Thesis, Western Australia University.
Yoo, J.C., Ji, S.W., Ahn, J.W., Kim, C.S. and Shin, H.Y., 2017, A Case Study of Mine Environmental Restoration using Coal Ash, J. of Korean Inst. of Resources Recycling, 26, 2, 80-88.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.