최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.30 no.3, 2021년, pp.142 - 148
전효원 (대구기계부품연구원 연구개발본부 뿌리기술연구팀) , 서창희 (대구기계부품연구원 연구개발본부 뿌리기술연구팀) , 오상균 (대구기계부품연구원 연구개발본부 뿌리기술연구팀) , 권태하 (대구기계부품연구원 연구개발본부 뿌리기술연구팀) , 강경필 (솔루션랩 기술연구소) , 육형섭 (DAS 연구기획팀)
In hot forging analysis, the interfacial heat transfer coefficient (IHTC) is a very important factor defining the heat flow between the die and the material. In particular, in the hot forging analysis of aluminum 6xxx series alloy, which are used in automobile parts, differences in load and microstr...
J. Sengupta, B.G. Thomas, M.A. Wells, 2005, The use of water cooling during the continuous casting of steel and aluminum alloys, Metall. Mater. Trans. A, Vol. 36A, pp 187~204. https://doi.org/10.1007/s11661-005-0151-y
O. Vladivoj, S. Peter, 2011, The effect of surface recrystallized layers on properties of extrusions and forgings from high strength aluminium alloys, Metal 2011, pp 1~7
S. Elizabeth, C. Sally, D. Natalia, Z. Xinquan, 2004, Effects of extrusion parameters on coarse grain surface layer in 6xxx series extrusion, aluminum extruders council and the aluminum association., pp 115~126
G. Chen, L. Chen, G. Zhao, W. Cui, 2017, Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization, J. Alloy. Compound., Vol. 710, pp 80~91. https://doi.org/10.1016/j.jallcom.2017.03.240
W. Wilson, S. Schmid, J. Liu, 2004, Advanced simulations for hot forging_heat transfer model for use with the finite element method, J. Mater. Process. Technol., Vol.155-156, pp 1912~1917. https://doi.org/10.1016/j.jmatprotec.2004.04.399
V. K. Jain, 1990, Determination of heat transfer coefficient for forging applications, J. Mater. Shaping. Technol., Vol. 8, No. 3, pp. 193~202. https://doi.org/10.1007/bf02833814
W. Xiao, B. Wang, K. Zheng, J. Zhou, J. Lin, 2018, A study of interfacial heat transfer and its effect on quenching when hot stamping AA7075, Arch. Civ. Mech. Eng., Vol. 18, pp 723~730. https://doi.org/10.1016/j.acme.2017.12.001
K. Ji, O. Fakir, H. Gao, L. Wang, 2015, Determination of heat transfer coefficient for hot stamping process, Mater. Today:. Proc, pp 434~439. https://doi.org/10.1016/j.matpr.2015.05.059
X. Liu, K. Ji, O. Fakir, H. Fang, M. Gharbi, L. Wang, 2017, Determination of the interfacial heat transfer coefficient for a hot aluminium stamping process, J. Mater. Process. Technol., Vol. 247, pp 158~170. https://doi.org/10.1016/j.jmatprotec.2017.04.005
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.