최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.31 no.3, 2021년, pp.161 - 169
헤인 탯 엉 (연세대학교 언더우드학부 융합과학공학부 에너지환경융합) , 라즈쿠마 파텔 (연세대학교 언더우드학부 융합과학공학부 에너지환경융합) , 김종학 (연세대학교 화공생명공학과)
As clean water continues to be a demand in this global water crisis, development of separation membrane technology for water purification becomes a necessity. The effectiveness of separation membranes is hindered in the water crisis due to fouling of membranes. To address this problem, the applicati...
L. D. Tijing, J. R. C. Dizon, I. Ibrahim, A. R. N. Nisay, H. K. Shon, R. C. Advincula, "3D printing for membrane separation, desalination and water treatment", Appl. Mater. Today, 18, 100486 (2020).
A. Ambrosi, R. R. S. Shi, R. D. Webster, "3D-printing for electrolytic processes and electrochemical flow systems", J. Mater. Chem. A, 8, 21902 (2020).
A. Akthakul, R. F. Salinaro, A. M. Mayes, "Antifouling polymer membranes with subnanometer size selectivity", Macromolecules, 37, 7663 (2004).
D. M. Yebra, S. Kiil, K. Dam-Johansen, "Antifouling technology - Past, present and future steps towards efficient and environmentally friendly antifouling coatings", Prog. Org. Coatings, 50, 75 (2004).
S. P. Nunes, "Can fouling in membranes be ever defeated?", Curr. Opin. Chem. Eng., 28, 90 (2020).
T. Y. Kim, J. W. Rhim, "Confirmation of The Fouling Phenomena in CDI Process and The Establishment of Its Removal Process Conditions", Membr. J., 29, 276 (2019).
Y. Ke, W. Yuan, F. Zhou, W. Guo, J. Li, Z. Zhuang, X. Su, B. Lu, Y. Zhao, Y. Tang, Y. Chen, J. Song, "A critical review on surface-pattern engineering of nafion membrane for fuel cell applications", Renew. Sustain. Energy Rev., 145, 110860 (2021).
H. Jang, J. Kim, "Effect of Inorganic Particles on Organic Fouling in Pressurized Membrane Filtration", Membr. J., 30, 131 (2020).
M. L. Carman, T. G. Estes, A. W. Feinberg, J. F. Schumacher, W. Wilkerson, L. H. Wilson, M. E. Callow, J. A. Callow, A. B. Brennan, "Engineered antifouling microtopographies - Correlating wettability with cell attachment", Biofouling, 22, 11 (2006).
K. H. Lin, J. C. Crocker, V. Prasad, A. Schofield, D. A. Weitz, T. C. Lubensky, A. G. Yodh, "Entropically driven colloidal crystallization on patterned surfaces", Phys. Rev. Lett., 85, 1770 (2000).
M. Elimelech, W. A. Phillip, "The future of seawater desalination: Energy, technology, and the environment", Science, 333, 712 (2011).
N. U. Barambu, M. R. Bilad, Y. Wibisono, J. Jaafar, T. M. I. Mahlia, A. L. Khan, "Membrane surface patterning as a fouling mitigation strategy in liquid filtration: A review", Polym. 11, 10 (2019).
N. Yanar, P. Kallem, M. Son, H. Park, S. Kang, H. Choi, "A New era of water treatment technologies: 3D printing for membranes", J. Ind. Eng. Chem., 91, 1 (2020).
Y. J. Won, J. Lee, D. C. Choi, H. R. Chae, I. Kim, C. H. Lee, I. C. Kim, "Preparation and application of patterned membranes for wastewater treatment", Environ. Sci. Technol., 46, 11021 (2012).
M. N. Issac, B. Kandasubramanian, "Review of manufacturing three-dimensional-printed membranes for water treatment", Environ. Sci. Pollut. Res., 27, 36091 (2020).
D. H. Nam, J. W. Rhim, "Separation Characteristics of Barium Ion in Water Using Capacitive Deionization (CDI) Process", Membr. J., 29, 355 (2019).
S. Aubert, M. Bezagu, A. C. Spivey, S. Arseniyadis, "Spatial and temporal control of chemical processes", Nat. Rev. Chem., 3, 706 (2019).
D. Rana, T. Matsuura, "Surface modifications for antifouling membranes", Chem. Rev., 110, 2448 (2010).
Y. Ding, S. Maruf, M. Aghajani, A. R. Greenberg, "Surface patterning of polymeric membranes and its effect on antifouling characteristics", Sep. Sci. Technol., 52, 240 (2017).
O. Heinz, M. Aghajani, A. R. Greenberg, Y. Ding, "Surface-patterning of polymeric membranes: fabrication and performance", Curr. Opin. Chem. Eng., 20, 1 (2018).
Y. Ding, J. Sun, H. W. Ro, Z. Wang, J. Zhou, N. J. Lin, M. T. Cicerone, C. L. Soles, L. G. Sheng, "Thermodynamic underpinnings of cell alignment on controlled topographies", Adv. Mater., 23, 421 (2011).
A. Al-Shimmery, S. Mazinani, J. Ji, Y. M. J. Chew, D. Mattia, "3D printed composite membranes with enhanced anti-fouling behaviour", J. Membr. Sci., 574, 76 (2019).
S. Mazinani, A. Al-Shimmery, Y. M. John Chew, D. Mattia, "3D Printed Fouling-Resistant Composite Membranes", ACS Appl. Mater. Interfaces, 11, 26373 (2019).
A. Asad, M. Rastgar, H. Nazaripoor, M. Sadrzadeh, D. Sameoto, "Durability and recoverability of soft lithographically patterned hydrogel molds for the formation of phase separation membranes", Micromachines, 11, 108 (2020).
A. Asad, M. Sadrzadeh, D. Sameoto, "Direct Micropatterning of Phase Separation Membranes Using Hydrogel Soft Lithography", Adv. Mater. Technol., 4, 1800384 (2019).
Q. Cao, "Anisotropic electrokinetic transport in channels modified with patterned polymer brushes", Soft Matter, 15, 4132 (2019).
Y. Ding, S. Maruf, M. Aghajani, A.R. Greenberg, "Surface patterning of polymeric membranes and its effect on antifouling characteristics", Sep. Sci. Technol., 52, 240 (2017).
I. M. A. Elsherbiny, A. S. G. Khalil, M. Ulbricht, "Influence of surface micro-patterning and hydrogel coating on colloidal silica fouling of polyamide thin-film composite membranes", Membranes, 9, 67 (2019).
X. He, T. Wang, Y. Li, J. Chen, J. Li, "Fabrication and characterization of micro-patterned PDMS composite membranes for enhanced ethanol recovery", J. Membr. Sci., 563, 447 (2018).
A. Ilyas, A. Yihdego Gebreyohannes, J. Qian, D. Reynaerts, S. Kuhn, I. F. J. Vankelecom, "Micropatterned membranes prepared via modified phase inversion: Effect of modified interface on water fluxes and organic fouling", J. Colloid Interface Sci., 585, 490 (2021).
S. Wang, Z. Y. Wang, J. Z. Xia, X. M. Wang, "Polyethylene-substrateed nanofiltration membrane with in situ formed surface patterns of millimeter size in resisting fouling", J. Membr. Sci., 620, 118830 (2021).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.