$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

철근 부식에 따른 철근콘크리트 휨 부재의 처짐 산정에 대한 실험적 연구
An Experimental Study on the Deflection Estimation of RC Flexural Member by Corrosion of Reinforcement 원문보기

Journal of the Korean Recycled Construction Resources Institute = 한국건설순환자원학회 논문집, v.9 no.2, 2021년, pp.143 - 151  

김지상 (서경대학교 토목건축공학과) ,  문형갑 ((주)한국종합기술)

초록
AI-Helper 아이콘AI-Helper

이 논문에서는 철근 부식을 촉진시킨 휨 부재의 4점 재하 재하실험을 통하여 철근 지름 및 부식률의 변화에 따른 처짐과 곡률 및 균열모멘트의 변화를 측정하는 실험을 수행하였다. 부식률은 중량비로 0%, 2%, 5% 및 10%로 변화하였으며, 철근의 지름은 각각 10mm, 13mm 및 19mm로 하였다. 실험 결과에 따르면 처짐에 대한 철근 지름의 영향은 크지 않았으며, 철근의 부식률이 2%를 초과하는 경우 부식되지 않은 철근을 가진 부재에 비하여 처짐이 증가하고 균열모멘트가 감소하는 경향을 확인하였다. 이는 부식된 철근에 대한 직접인발 시험과 동일한 경향을 보이는 것이며, 철근의 부식률이 크지 않은 경우 휨거동에 대한 부식의 영향이 크지 않음을 의미한다. 또한, 철근이 부식된 철근콘크리트 부재의 처짐량을 산정하기 위하여 부식률에 따른 균열모멘트의 변화를 반영하는 처짐 보정계수를 도출하고 실험결과를 통하여 그 적용성을 확인하였다.

Abstract AI-Helper 아이콘AI-Helper

Flexural test of reinforced concrete beam with corroded reinforcement were performed to measure the deflection, curvature and cracking moment for various bar diameter and amounts of corrosion. The amounts of corrosion are varied from 0% to 10% by weight and the bar diameters are chosen as 10mm, 13mm...

주제어

표/그림 (17)

참고문헌 (15)

  1. Ballim, Y., Reid, J.C. (2003). Reinforcement corrosion and the deflection of RC beams an experimental critique of current test methods, Cement & Concrete Composites, 25, 625-632. 

  2. Bhargava, K., Ghosh A.K., Mori, Y., Ramanujam, S. (2008). Suggested empirical models for corrosion-induced bond degradation in reinforced concrete, Journal of Structural Engineering, 134(2), 221-230. 

  3. CEB-FIP (1990). CEB-FIP Model Code 1990, Comite EuroInternational Du Beton, Paris, 247-251. 

  4. Choi, S.W., Yang, J.H., Kim, W. (2010). Influence of tension stiffening effect on deflection and crack width in RC members, Journal of the Korea Concrete Institute, 22(6), 761-768. 

  5. Eurocode 2 (2004). Design of Concrete Structures Part 1-1: general Rules and Rules for Buildings, European Committee for Standardisation, Brussels. 

  6. Jung, W.Y., Kwon, M.H., Ahn, M.K. (2011). Structural behavior of compressive and flexural members due to corroded reinforcing bars and different bonding interfaces, Journal of Disaster Management, 11(5), 33-39. 

  7. KCI. (2012). Concrete Structure Standards.Commentary. 

  8. KSA. (2016). KS F 2408 : 2016 Standard Test Method for Flexural Strength of Concrete. 

  9. KSA. (2017). KS F 2405 : 2010 Standard Test Method for Compressive Strength of Concrete 

  10. KSA. (2016). KS F 2423 : 2016 Standard Test Method for Tensile Splitting Strength of Concrete. 

  11. KSA. (2018). KS B 0802 : 2003 Method of Tensile Test for Metallic Materials. 

  12. Kim, W. (2014). Limite State Design of Concrete Structures, DongHwa Technology Publishing, Seoul. 

  13. Park, Y.J. (2004). Experimental Research on Bond Characteristics and Tensile Strength by Corrosion of Reinforcement Steels, Master's Thesis, Tong-Myong Univ. 

  14. Stanish, K., Hooton, R.D., Pantazopoulou, S.J. (1999). Corrosion effects on bond strength in reinforced concrete, ACI Structural Journal, 96(6), 915-921. 

  15. Yang, X., Zhu, H. (2012). Finite element investigation on load carrying capacity of corroded RC beam based on bond-slip, Jordan Journal of Civil Engineering, 6(1), 134-146. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로