참고문헌 (12)

1. K. H. Kang, "Design Guideline with the Structural Analysis of the Press Die for Stamping an Auto-part with Ultra High Strength Steel of 1.5GPa UTS-grade", M. S. Thesis, Graduate School, Daegu University, Gyeongbuk, Korea, 2015. 

2. Kwon Ku Kwan, "Prediction of springback through the coupled analysis of forming process and tool deformation", Kangwon National University, 2019. 

3. O. S. Seo, E. G. Lee, S. M. Hong, S. C. Choi, S.Y. Ryu, M. G. Lee, Heon Young Kim., "Prediction of Springback for Al alloy sheet using Yoshida-Uemori model", The Korean Society For Technology of Plasticity, Vol. 2012 No. 5 pp. 219-222, 2012. 

4. Kwak, Jung-Hwan, Jung, Chul-Young, Kim, Se-Ho, Song, Jung-Han. Springback tendency with the variable blank holding force in the drawing process of the UHSS, 12(3), pp. 60-65, 2018. 

5. N. Kardes, Y. Demiralp, G. Sukumaran, C. Choi, H. Kim, J. Gonzalez-Mendez, N. Agarwal, M. Deshpande, and T. Al tan, "Control of Springback and Di mensional Tolerances in Forming of Advanced High Strength Steel (AHSS) Parts, Part I: Load-Unload Tensile Test and V-Die Bending", Report CPF/1.4/10/01, Center for Precision Forming, The Ohio State University, 2010. 

6. YANG, Xi, et al. Prediction of springback in air-bending of Advanced High Strength steel (DP780) considering Young s modulus variation and with a piecewise hardening function. International Journal of Mechanical Sciences, 105: pp. 266-272, 2016. 

   상세보기

7. LEE, Dong-Hwan; HAN, Seong-Ryeol; LEE, Chun-Kyu. Analytical evaluation and study on the springback according to the cross sectional form of 1.2 GPa ultra high strength steel plate. Journal of the Korea Society of Die & Mold Engineering, 13.4: pp. 17-22, 2019. 

8. K. Yilamu, R. Hino, H. Hamasaki, F. Yoshida, "Bauschinger Effect on Springback of Clad Sheet Metals in Draw Bending", MATERIALS TRANSACTIONS, Volume 51, Issue 7, pp. 1364-1366, 2010. 

   상세보기

9. Hutte, H.:"Untersuchungen zum Ruckfederungsverhalten hochfester Stahlblechwerkstoffe beim Tiefziehen", Dissertation Universitat Hannover, 2001. 

10. S. J. Moon, M. G. Lee, Y. T. Keum, "Experimental Drawbead Dies for Measuring Drawbead Forces", Transactions of Materials Processing, 17(7), pp. 511-516, 2008. 

11. S-H Kim, "Press Die Design Engineering", Daekwang Surim, 2013. 

12. Y. S. Kwon, H. W. Bae, B. W. Kang, J. H. Kwak, S. H. Kim, J. W. Park, Y. S. Kim, J. K. Park, "Effects of the Friction and Draw-bead Shape on the Springback Amount in the U-draw Bending Process", The Korean Society For Technology of Plasticity, Vol. 2016 No.10 pp. 209-209, 2016. 

저자의 다른 논문 :

윤재웅 (5) 최계광 (84)