최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.15 no.2, 2021년, pp.36 - 41
전대선 (한국폴리텍대학 익산캠퍼스 컴퓨터응용기계과)
The 3 dimensional Pipe (Annular) Shaped Products was selected as a test sample, then a attribute of a molding shrinkage according to the parameters of a injection process was examined with PC, which is the typical engineering plastic. Both the inside and the outside diameter of the Pipe (Annular) sa...
M. Y. Lyu, J. H. Mo, W. J. Chung, "Shrinkage in Injection Molded Part for Operational Conditions and Resins", Elastomer, vol,38, No.4, pp. 295-302, 2003.
M. Y. Lyu, J. H. Mo, "Investigation of the Part Shrinkage in Injection Molding for Class Fiber Reinforced Thermoplastics", Journal of the Korean society for technology of plastics, v.13 no.6, pp. 515-521, 2004.
S. R. Han, J. H. Kin, S. G. Jeon, Y. D. Jeong, 2007 "A Study on the Mechanical Properties and Shrinkage of Thermoplastic Elastomer", Journal of the Korean society for technology of plastics v.16 no.1no.91, pp. 36-41, 2007.
H. I. Moon, C. W. Choi, K. S. Jeong, H. Y. Kim, "Thermal Viscoelastic Analysis of Plastic Part Considering Residual Stress", Journal of the Korean society for technology of plastics v.17 no.7no.105, pp. 496-500, 2008.
C. D. Choi, "Design of Gate Locations, Molding Conditions, and Part Structure to Reduce the Warpage of Short-Fiber Reinforced Injection Molded Part", Journal of the Korean society for technology of plastics v.17 no.6 no.104, pp. 443-448, 2008.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.