$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

[국내논문] 속채움 콘크리트 및 길이방향 철근으로 보강된 PHC 파일의 휨성능
Flexural Performance of PHC Piles with Infilled concrete and Longitudinal Reinforcing Bars 원문보기

한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.25 no.3, 2021년, pp.77 - 84  

한선진 (서울시립대학교 건축학부) ,  이정민 (토론토 대학교 토목공학과) ,  김민석 (서울시립대학교 건축공학과) ,  김재현 (서울시립대학교 건축공학과) ,  김강수 (서울시립대학교 건축공학과 스마트시티융합전공) ,  오영훈 (건양대학교 의료공간디자인학과)

초록
AI-Helper 아이콘AI-Helper

이 연구에서는 속채움 콘크리트와 길이방향 철근으로 보강된 PHC 파일에 대한 휨실험을 수행하였으며, 실험의 주요 변수는 길이 방향 철근비와 PHC 파일 중공 내부 표면에 형성된 슬러지 유무로 설정하였다. 총 6개의 PHC 파일 실험체를 제작하였으며, 실험체들의 파괴모드, 균열패턴, 단면내 길이방향 변형률 분포, PHC 파일과 속채움 콘크리트 사이에 발생된 단부 슬립을 상세히 계측하고 분석하였다. 실험결과, 길이방향 철근비가 증가할수록 휨 강성 및 강도가 증가하는 것으로 나타났으며, PHC 파일 내부 표면에 형성된 슬러지는 실험체의 휨성능에 큰 영향을 미치지 않는 것으로 나타났다. 실험적 연구와 더불어 이 연구에서는 변형률 적합조건, PHC 파일과 속채움 콘크리트 단면내 변형률 및 응력 분포를 고려한 비선형 휨해석 모델을 제안하였으며, 해석결과를 실험결과와 비교하여 제안모델의 합리성을 검증하였다. 그 결과, 제안모델은 속채움 콘크리트와 길이방향 철근으로 보강된 PHC 파일의 휨거동을 매우 우수한 정확도로 평가하는 것으로 나타났다.

Abstract AI-Helper 아이콘AI-Helper

In this study, flexural tests of prestressed high strength spun concrete (PHC) piles reinforced with infilled concrete and longitudinal rebars were conducted, where the longitudinal rebar ratio and the presence of sludge formed on the inner surface of PHC pile were set as key test variables. A total...

주제어

표/그림 (11)

참고문헌 (14)

  1. Lei, M., Liu, L., Lin, Y., and Li, J. (2019), Study on Flexural Bearing Capacity Calculation Method of Enclosure Pile with Partial Excision in Deep Foundation Pit, Advances in Civil Engineering, 4812857. 

  2. Yang, Z., Li, G., Wang, W., and Lv, Y. (2018), Study on the Flexural Performance of Prestressed High Strength Concrete Pile, KSCE Journal of Civil Engineering, 22, 4073-4082. 

  3. Kim, H. J., and Mission, J. L. C. (2011), Improved evaluation of Equivalent Top-Down Load-Displacement Curve from a Bottom-up Pile Load Test, Journal of Geotechnical and Geoenvironmental Engineering, 137(6), 568-578. 

  4. Chung, H. J., and Paik, K. H. (2018), Analysis on Flexural Behavior of Hollow Prestressed Concrete Filled Steel Tube Piles, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(2), 133-140. 

  5. Bang, J. W., Park, C. K., Yang, S.Y., and Kim, Y. Y. (2016), Flexural Behavior of Large-Diameter Composite PHC pile Using In-Filled Concrete and Reinforcement, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(5), 109-115. 

  6. Bang, J. W., Hyun, J. H., Ahn, K. C., and Kim, Y. Y. (2017), Development and Evaluation of Hollow-head Precast Reinforced Concrete Pile, Journal of the Korea Institute for Structural Maintenance and Inspection, 21(2), 130-137. 

  7. Hyun, J. H., Bang, J. W., Lee, S. S., and Kim, Y. Y. (2012), Shear Strength Enhancement of Hollow PHC Pile Reinforced with Infilled Concrete and Shear Reinforcement, Journal of Korea Concrete Institute, 24(1), 71-78. 

  8. Kim, M. S. (2021), Flexural and Shear Strength of PHC Piles Reinforced with Infilled Concrete, Master Thesis, University of Seoul, Seoul, South Korea. 

  9. Korean Industrial Standards. (2014), KSF 4306, Pretensioned spun high strength concrete piles, Korean Industrial Standards, Seoul, South Korea. 

  10. Han, S. J., Jeong, J. H., Joo, H. E., Choi, S. H., Choi, S., and Kim, K. S. (2019), Flexural and Shear Performance of Prestressed Composite Slabs with Inverted Multi-Ribs, Applied Sciences, 9(22), 4946. 

  11. Popovics, S. A. (1973), Numerical Approach to the Complete Stress-Strain Curve of Concrete, Cement and Concrete Research, 3(5), 583-599. 

  12. Ramberg, W., and Osgood, W. R. (1943), Description of stress- strain curves bythree parameters, National Advisory Committee For Aeronautics,Technical Note No. 902, Washington DC, USA. 

  13. Han, S. J., Lee, D. H., Oh, J. Y., Choi, S. H., and Kim, K. S. (2018), Flexural Responses of Prestressed Hybrid Wide Flange Composite Girders, International Hournal of Concrete Structures and Materials, 12, 53. 

  14. Korea Concrete Institute (2017), Korea Model Code 2017 (KCI 2017), Korea Concrete Institute, Seoul, Republic of Korea. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로