$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

액체로켓엔진 재순환 유로에서의 수격현상에 관한 실험적 연구
Experimental Investigation on Water Hammer Phenomenon in the Recirculation Line of a Liquid Rocket Engine 원문보기

한국추진공학회지 = Journal of the Korean Society of Propulsion Engineers, v.25 no.2, 2021년, pp.110 - 118  

김보겸 (Aerospace System Engineering, University of Science and Technology) ,  홍문근 (Aerospace System Engineering, University of Science and Technology) ,  이지성 (Launcher Propulsion Control Team, Korea Aerospace Research Institute) ,  김정한 (Launcher Propulsion Control Team, Korea Aerospace Research Institute)

초록
AI-Helper 아이콘AI-Helper

액체로켓엔진의 구성품인 연소기 산화제 개폐밸브는 연소기에 공급되는 산화제를 제어한다. 밸브가 닫힐 때 산화제는 연소기 대신 재순환 유로로 공급되며, 이때 발생한 수격현상에 의해 설계 기준보다 큰 압력이 발생할 수 있다. 본 연구에서는 액체질소를 운용 유체로 사용하여 재순환 유로의 초기 조건에 따른 수격 시험을 수행하였으며, 그 결과 발생하는 압력파를 분석하였다. 초기 조건에 따라 재순환유로 내부 압력파의 경향이 달랐으며, 특히 재순환 유로 끝단에서는 응축에 의한 수격이 발생할 때 압력이 최대로 커질 수 있음을 확인하였다.

Abstract AI-Helper 아이콘AI-Helper

In a liquid rocket engine system, the flow of oxidizer into the combustion chamber is controlled by the main oxidizer shut-off valve. When the valve is closed, the oxidizer flows via the recirculation line, not into the combustion chamber. In this situation, the measured pressure could be much highe...

주제어

참고문헌 (9)

  1. Zaruba, J., Water hammer in pipe-line systems, Elsevier, 1993 

  2. Kwon, K.C., Lee, E.S., Park, S.M., Kang, S.J. and Rho, B.J., "An Experimental Study on Water-Hammer Effect for Spacecraft Propulsion System," Proceedings of the KSME Conference, pp. 288-293, 2001. 

  3. Lecourt, R. and Steelant, J., "Experimental investigation of waterhammer in simplified feed lines of satellite propulsion systems," Journal of Propulsion and Power, Vol. 23, No. 6, pp. 1214-1224, 2007. 

  4. Porca, P., Lema, M., Rambaud, P. and Steelant, J., "Experimental and numerical multiphase-front fluid hammer," Journal of Propulsion and Power, Vol. 30, No. 2, pp. 368-376, 2014. 

  5. Gouriet, J.B., Huertas-Martinez, A., Buchlin, J.M., Vetrano, M.R. and Steelant, J., "Multiphase fluid hammer with cryogenic fluids," Proceedings of Space Propulsion, 2016. 

  6. Shon, Y.U., and Chun, M. H. "A parametric study of condensation-induced water hammer in nuclear power plants," M.S. Thesis, KAIST, 1990. 

  7. Kim, D., Hong, M., Park, J. and Lee, S.Y., "Study for the Development of a Main Oxidizer Shut-off Valve for Liquid Rocket Engines," Journal of the Korean Society of Propulsion Engineers, Vol. 17, No. 6, pp. 113-119, 2013 

  8. Hong, M., "Opening Characteristics of a Main Oxidizer Shut-off Valve," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 45, No. 11, pp. 989-997, 2017. 

  9. Dirndorfer, S., Steam condensation induced water hammer in a vertical up-fill configuration within an integral test facility: experiments and computational simulations, Doctoral dissertation, Universitatsbibliothek der Universitat der Bundeswehr Munchen, 2017. 

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로