최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.6, 2021년, pp.114 - 120
박용우 (경상대학교 대학원 융합기계공학과) , 문성민 (경상대학교 기계항공공학부) , 류성기 (경상대학교 기계항공공학부)
This study is focused on the root mean square and peak-to-valley based on the injection conditions of the f-theta lens, one of the main components of laser printers and laser scanning systems. The f-theta lens of an aspherical plastic lens requires ultra-preaction. Injection molding is typically use...
Noh, M. J., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "System Design for Laser Scanning Unit using A3", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 71-72, 2011.
Yoo, K. S., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "Injection Molding of a Laser Scanning Unit Optical System", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 102-103, 2011.
Robert, E., Hopkins and D. Stephenson, Optical Scanning(Marcel Dekker), pp. 27~82, 1991.
Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 1 1, pp.163~170, 2004.
Jeong, I. S., Ban, M. S, Son,, K. E., and Lee, B. B, "Development of Ftheta Lens for Laser Scanning Unit", Technology and Innovation, Vol. 1, No. 1, pp. 13~19, 2013.
Rim, C. S., "The effect analysis of birefringence of plastic f-theta lens on the beam diameter", Korean Journal of the Optics and Photonics, Vol 10, No. 1, pp. 15-20, 1999.
Bringans, R. D., "Application of Blue Diode Lasers to Printing," Mrs online Proceedings Library(OPL), Vol. 482, pp. 1203, 1997.
Sakuma, N., "Aspherical Surface in the Laser Writing Optics," Optical Design, No. 17, pp. 9-15, 1999.
Carmina, L., William, T. P. and Peter, P. C., "Athermalization of a Single-Component Lens with Diffractive Optics," Applied Optics, Vol. 32, No. 13, pp. 2295-2302, 1993.
Minoura, K., "Historical Review and Future Trends of Scanning Optical Systems for Laser Beam Printers," International Society for Optics and Photonics, Vol. 1987, pp. 264-273, 1993.
Park, K., and Han, C. Y. "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device," Journal of the Korean Society of Precision Engineering, Vol. 21, pp. 163-170, 2004.
Klepek, G. "Manufacturing optical lens by injection compression molding," Kunststoffe, Vol. 77, pp. 13, 1987.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.