[논문]페로니켈슬래그 순환자원을 활용한 점토기와의 성능평가

김순호

doi:10.5345/jkibc.2021.21.4.281

페로니켈슬래그 순환자원을 활용한 점토기와의 성능평가
Study of Characteristics of Clay Roof Tiles Using Ferro Nickle Slag Recycled Resources 원문보기

한국건축시공학회지 = Journal of the Korea Institute of Building Construction, v.21 no.4, 2021년, pp.281 - 291

김순호 (Industry-University Cooperation Foundation, Changwon University)

초록
AI-Helper

건설산업의 환경부하를 최소화하기 위해서는 건축 자재의 친환경성을 강화하고 내구수명을 연장하여 신축 및 철거를 최소화의 필요성이 있다. 따라서 이러한 문제점을 개선하기 위해 많은 한옥의 지붕마감 공법이 제안되었지만 현재는 경제성, 무게, 내구성 등의 문제점으로 기존공법을 사용하는 추세이다. 한옥 건물의 지붕재로 사용되는 점토기와의 제조방법에 경주에서 생산된 기와용 점토와 고령토와 S사의 재활용 FNS(Ferro Nickel Slag) 활용하여 문제를 해결하고자 연구를 진행하여 한국전통 점토기와의 개발 특성과 재료를 연구하고 관련 기초자료를 제시한다.

Abstract ▼ AI-Helper

To reduce the environmental load of the construction industry, there is a need to minimize construction and demolition by strengthening the eco-friendliness of building materials and extending the durable lifespan. Therefore, while many Hanok roof finishing methods have been proposed to address these problems, the current trend is to use the existing method due to issues such as economic feasibility, weight, and durability. The manufacturing method of clay roof tiles used as roofing materials for Hanok buildings is optimized by using a mixture of 64.5% Gyeongju clay, 15.0% kaolin, 15.0% FNS(Ferro Nickel Slag), and 5.5% MAS(Magnesia Aluminum Silicate) under optimal conditions. The results of the experiment involving firing at 1,125℃ showed that flexural strength of 12,102N, which is higher than the standard of KS F 3510, an absorption rate of 6.08%, a volume specific gravity of 2.15g/cm3, and the freeze-thaw properties were satisfied. A method for securing stable quality was studied.

주제어

표/그림 (11)

그림 Figure 1. Experimental procedure to manufacture and evaluate FNS clay roof tile
표 Table 1. Target values of clay roof tile test analysis
표 Table 2. Chemical composition of materials
표 Table 3. Mixing ratio of materials for clay roof tile experiment
표 Table 4. Mixture proportion of clay roof tile
$Figure 2. Flexural fracture load test$ 그림 Figure 2. Flexural fracture load test
표 Table 5. Results of flexural strength test
그림 Figure 3. Manufacture of clay roofing tile: Physical properties of specimens prepared at different sintering temperatures at 1,100~1,150°C
표 Table 6. Test results of total shrinkage
그림 Figure 4. FNS 0% to 20% addition SEM 20000 magnification analysis result 1125°C calcined clay tile
그림 Figure 5. Photo of color change produced by oxidative firing and reduction firing according to the addition of FNS to clay roof tiles

참고문헌 (11)

Kim EH, Yeo HJ, Lee YK. A study on reasonable policy direction for strengthening building safety. Seoul (Korea): Architecture & Urban Research Institute; 2016. p. 75-145.
Kim SH, Hong SW, Lee DW, Kim SW, Shin CH, Kim KT. On study of the energy analysis with mock-up house to HIP green home. Proceeding of the Architectural Institute of Korea; 2010 Oct 15-16; Daegu, Korea. Seoul (Korea): Architectural Institute of Korea; 2010. p. 575-8.
KIM JE. Housing trends after COVID-19 [Internet]. Seoul (Korea): Korean Specialized Construction Newspaper; 2021 May 3. Available from: http://www.koscaj.com/news/articleView.html?idxno218456
Song KL, Choi JL, Song JK, Cheon DY, Lee BY. Properties of eco-friendly korean traditional rooftile based on alkali-activated blast. Journal of the Archi tectural Institute of Korea. 2013 Aug;15(4):77-83.
Kim SH, Choi JM. A study on the characteristics of low temperature sintering ceramic siding using natural minerals. Journal of the Architectural Institute of Korea Structure & Construction. 2019 Dec;35(12):149-56. https://doi.org/10.5659/JAIK_SC.2019.35.12.149

상세보기
Kim SH. A study properties of traditional korean roof tile by adding nano alumino silicate. Journal of the Korea Institute of Building Construction. 2020 Oct;20(5):425-32. https://doi.org/10.5345/JKIBC.2020.20.5.425

원문보기 상세보기
Park SH, Chu YS, Song H, Lee JK, Seo SK. Fabrication of Mg(OH) 2 from ferro-nickel slag. Resources Recycling. 2013 Feb;22(1):42-7. https://doi.org/10.7844/kirr.2013.22.1.42

원문보기 상세보기
Choi WJ, Kim HS, Ann KY. A study on the hydration characteristics and fundamental properties of ternary blended cement using ferronickel slag. Journal of the Korean Recycled Construction Resources Institute. 2020 Mar;8(1):39-48. https://doi.org/10.14190/JRCR.2020.8.1.39

원문보기 상세보기
Lee KH. Characterization of flowable fill with ferro nickel slag dust. Journal of the Korea Academia-Industrial cooperation Society. 2017 May;18(5):16-21. https://doi.org/10.5762/KAIS.2017.18.5.16

원문보기 상세보기
Kim SH. Zero energy hip Green Home Construction Case and Energy Analysis. Journal of the Korean Institute of Architectural Sustainable Environment and Building Systems. 2011 Mar;01:279-88.
Choi JW, Han MS. Characteristics of Expression according to Iron Oxide Content in Ceramic Glaze. Journal of Conservation Science 2020;36(5):393-404. https://doi.org/10.12654/JCS.2020.36.5.09

원문보기 상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증