최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국결정성장학회지 = Journal of the Korean crystal growth and crystal technology, v.31 no.4, 2021년, pp.182 - 189
하태완 (경기대학교 신소재공학과) , 강승구 (경기대학교 신소재공학과) , 김강덕 (경기대학교 신소재공학과)
Porous ceramics were manufactured using the foaming method for the development of inorganic insulating materials. Silica fume and SiO2 were used as main raw materials, and bentonite was used as a rapid setting agent for uniform structure formation of porous ceramics. The porous ceramics were sintere...
R.C. Lewis, "Properties of fresh and hardened concrete containing supplementary cementitious materials", N.D. Belie, M. Soutsos and E. Gruyaert, Ed, Vol. 3 (Springer, New York, 2018) p. 99.
F. Sanchez and C. Ince, "Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites", Compos. Sci. Technol. 69 (2009) 1310.
H.M. Khater, "Effect of silica fume on the characterization of the geopolymer materials", Int. J. Adv. Struct. 5 (2013) 12.
Y.P. Moon and J.Y. Choi, "Enhancement of the life of refractories through the operational experience of plasma torch melter", J. Nucl. Fuel Cycle Waste Technol. 14 (2016) 1277.
A. Watanabe, H. Takahashi and F. Nakatani, "Mechansim of dense magnesia layer formation near the surface of magnesia-carbon brick", J. Am. Ceram. Soc. 69 (1986) 213.
M. Hamidouche, N. Bouaouadja, C. Olagnon and G. Fantozzi, "Thermal shock behavior of mullite ceramic", Ceram. Int. 29 (2003) 599.
Z. Zivcova, E. Gregorova, W. Pabst, D.S. Smith, A. Michot and C. Poulier, "Thermal conductivity of porous alumina ceramics prepared using starch as a pore-forming agent", J. Eur. Ceram. Soc. 29 (2009) 347.
K. Andreev, V. Tadaion, Q. Zhu, W. Wang, Y. Yin and T. Tonnesen, "Thermal and mechanical cyclic tests and fracture mechanics parameters as indicators of thermal shock resistance - case study on silica refractories", J. Eur. Ceram. Soc. 39 (2019) 1650.
K. Andreev, V. Tadaion, J. Koster and E. Verstrynge, "Cyclic fatigue of silica refractories - effect of test method on failure process", J. Eur. Ceram. Soc. 37 (2017) 1811.
E. Gregorova, W. Pabst, P. Diblikova and V. Necina, "Temperature dependence of dampling in silica refractories measured via the impulse excitation technique", Ceram. Int. 44 (2018) 8363.
C. Sadik, I.E. El-Amrani and A. Albizane, "Recent advances in silica-alumina refractory: A review", J. Asian Ceram. Soc. 2 (2014) 83.
H. Lu, Y. Lei, L. Jia-zhan and Y. Jing-kun, "Effect of Al 2 O 3 powder on properties of fumed silica thermal insulating composites using mechanofusion technique", Appl. Mech. Mater. 148-149 (2012) 1011.
Y. Dai, Y. Yin, X. Xu, S. Jin, Y. Li and H. Harmuth, "Effect of the phase transformation on fracture behavior of fused silica refractories", J. Eur. Ceram. Soc. 38 (2018) 5601.
C.N. Djangang, E. Kamseu, M.K. Ndikontar, G.L. Lecomte-Nana, J. Soro, U.C. Melo, A. Elimbi, P. Blanchart and D. Njopwouo, "Sintering behaviour of porous ceramic kaolin-corundum composites: phase evolution and densification", Mater. Sci. Eng. A. Struct. Mater. 528 (2011) 8311.
T. Shimizu, K. Matsuura, H. Furue and K. Matsuzak, "Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method", J. Eur. Ceram. Soc. 33 (2013) 3429.
P. Sepulveda, "Gelcasting foams for porous ceramics", J. Am. Ceram. Soc. 76 (1997) 61.
D.J. Green, "Fabrication and mechanical properties of lightweight ceramics produced by sintering of hollow spheres", J. Am. Ceram. Soc. 68 (1985) 403.
A. Pokherl, D.N. Seo, S.T. Lee and I.J. Kim, "Processing of porous ceramics by direct foaming : a review", J. Korean Ceram. Soc. 50 (2013) 93.
W. Ramsden, "Separation of solids in the surface-layers of solutions and 'suspensions' (observations on surfacemembranes, bubbles, emulsions, and mechanical coagulation). - Preliminary account", Proc. R. Soc. Lond. 72 (1904) 477.
S.U. Pickering, "Pickering: emulsions", J. Chem. Soc. 91 (2001) 2001.
H. Schneider, J. Schreuer and B. Hildmann, "Structure and properties of mullite - a review", J. Eur. Ceram. Soc. 28 (2008) 329.
R.W. Powell, "Thermal conductivity of selected materials", R.W. Powell, C.Y. Ho and P.E. Liley, Ed, Vol. 8, (U. S. Dept. of Commerce, Washington, 1966) p. 99.
D.H. Olson, J.T. Gaskins, J.A. Tomko, E.J. Opila, R.A. Golden, G.J.K. Harrington, A.L. Chamberlain and P.E. Hopkins, "Local thermal conductivity measurements to determine the fraction of α-cristoblaite in thermally grown oxides for aerospace applications", Scr. Mater. 177 (2020) 214.
W. Yan, N. Li, Y. Li, G. Liu, B. Han and J. Xu, "Effect of particle size on microstructure and strength of porous spinel ceramics prepared by pore-forming in situ technique", Bull. Mater. Sci. 34 (2011) 1109.
S. Bhanja and B. Sengupta, "Influence of silica fume on the tensile strength of concrete", Cem. Concr. Res. 35 (2005) 743.
R. Duval and E.H. Kadri, "Influence of silica fume on the workability and the compressive strength of high-performance concretes", Cem. Concr. Res. 28 (1998) 533.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.