최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.9, 2021년, pp.35 - 41
고정일 (금오공과대학교 기계시스템공학과) , 이의영 (금오공과대학교 기계시스템공학과) , 이민재 (금오공과대학교 기계시스템공학과) , 최성대 (금오공과대학교 기계시스템공학과) , 허장욱 (금오공과대학교 기계시스템공학과)
A rotor is a crucial component in various mechanical assemblies. Additionally, high-speed and high-efficiency components are required in the automotive industry, manufacturing industry, and turbine systems. In particular, the failure of high-speed rotating bearings has catastrophic effects on auxili...
Choi, J. H., "Introduction of Failure Prognosis and PHM", Journal of The Korean Society of Mechanical Engineers, Vol. 53, No. 7, pp. 24-34, 2013.
Jeon, H. K., Kim, J. S., Kim, B. J. and Kim, W. J., "A Study on the fault diagnosis of ratating machine by machine learning", Journal of The Acoustical Society of Korea, Vol. 39, pp. 263-269, 2020.
Hong, D. P. and Kim, W. T., "Quantitative NDE Thermography for Fault Diganosis of Ball Bearings with Micro-Foreign Substances", Journal of The Korean Society for Nondestructive Testing, Vol. 34, pp. 305-310, 2014.
Muzakkir, S. M., Lijesh, K. P. and Hirani, H., "Failure Mode and Effect Analysis of Journal Bearing", International Journal of Applied Engineering Research, Vol. 10, No. 16, pp. 36843-36850, 2015.
Ahn, D. G., Yoo, J. M. and Jang, J. S., "How to Perform FMEA Effectively for Weapon System Development Stage", Journal of Applied Reliability, Vol. 21, No. 1, pp. 45-60, 2021.
Fitch, J., "How Water Causes Bearing Failure", Machinery Lubrication, Vol. 7, pp. 2-4, 2008.
Alam, S. T. and Hu,r J. W., "EEMD assisted supervised learning for the fault diagnosis of BLDC motor using vibration signal", Journal of Mechanical Science and Technology, Vol. 34, No. 10, pp. 3981-3990, 2020.
Kwak, T. H., Song, A. R. and Kim, Y. G., "The Impact of the PCA Dimensionality Reduction for CNN based Hyperspectral Image Classification", Korean Journal of Remote Sensing, Vol. 35, No. 6-1, pp. 959-971, 2019.
Jung, S. H., Lee, G. I., Kim, J. M., Hong, S. W., Chung, Y. S. and Jung, H. K., "A Comparison of Target Identification using Support Vector Machine with Various Kernel Functions" The Korean Institute of Electrical Engineers, Vol. 12, No. 1, pp. 77-95, 2020.
Yoo, Y. S., Kim, D. H., Kim, S. and Hur, J. W., "Fault Prognostics of a SMPS based on PCA-SVM" Journal of The Korean Society of Manufacturing Process Engineers, Vol. 19, No. 9, pp. 47-52, 2020.
Lee, G. H., Shin, B. C. and Hur, J. W., "Fault Classification of Gear Pumps Using SVM", Journal of Applied Reliability, Vol. 20, No. 2, pp. 189-196, 2020.
Hong, C. H., "Confusion Plot for the Confusion Matrix", Journal of the Korean Data And Information Science Society, Vol. 32, No. 2, pp. 1065-1066, 2018.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.