참고문헌 (20)

1. Noh, M. J., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "System Design for Laser Scanning Unit using A3," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 71-72, 2011. 

2. Yoo, K. S., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "Injection Molding of a Laser Scanning Unit Optical System", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 102-103, 2011. 

3. Rober,t E., Hopkins and D. Stephenson, Optical Scanning(Marcel Dekker), pp. 27~82, 1991. 

4. Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 11, pp. 163~170, 2004. 

5. Kim, S. S., Kim, H. K., Jeong, S. H., Kim, H. J., Kim, J. H., "Development of f-theta Lens for Laser Beam Printer", Journal of the Korean Institute of Electrical and Electronic Material Engineers, Vol. 19, No. 4, pp. 386-390, 2006. 

   원문보기 상세보기

6. Jeong, I. S., Ban, M. S, Son,, K. E., and Lee, B. B., "Development of Ftheta Lens for Laser Scanning Unit", Transactions of the KSME C: Technology and Innovation, Vol. 1, No. 1, pp. 13-19, 2013. 

   원문보기 상세보기

7. Rim, C. S., "The effect analysis of birefringence of plastic f-theta lens on the beam diameter", Korean Journal of the Optics and Photonics, Vol. 11, No. 2, pp. 73-79, 2000. 

8. Bringans, R. D., "Application of Blue Diode Lasers to Printing", Proc. of Materials Research Society Symposium, Vol. 482, pp. 1203-1210, 1998. 

9. Sakuma, N., "Aspherical Surface in the Laser Writing Optics", Optical Design, No. 17, pp. 9-15, 1999. 

10. Carmina, L., William, T. P. and Peter, P. C., "Athermalization of a Single-Component Lens with Diffractive Optics", Applied Optics, Vol. 32, No. 13, pp. 2295-2302, 1993. 

    상세보기

11. Kazuo, M., "Historical Review and Future Trends of Scanning Optical Systems for Laser Beam Printers", Proc. of SPIE, Vol. 1987, pp. 264-273, 1993. 

12. Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, pp. 163-170, 2004. 

13. Wu, C.-H. and Chen, W.-S., "Injection molding and injection compression molding of three-beam grating of DVD pickup lens," Sensors and Actuators A, Vol. 125, pp. 367-375, 2006. 

    상세보기

14. Suzuki, H., Kodera, S., Maekawa, S., Morita, N., Sakurai, E., Tanaka, K., & Syoji, K., "Study on Precision Grinding of Micro Aspherical Surface," Journal of the Japan Society for Precision Engineering, Vol. 64, No. 4, pp. 619-623, 1998. 

    상세보기

15. Itoh, S., "Study on Measurement of Axi-Symmetrical Form Generated by Ultra-Precision Machining(3rd Report)", Journal of the Japan Society for Precision Engineering, Vol. 61, No. 3, pp. 391-395, 1995. 

    

16. Lee, J. S. and Syoji, K., "A study on ultra precision machining for aspherical surface of optical parts," Journal of the KSPE, Vol. 19, No. 10, pp. 195-201. 2002. 

17. Takanori, H., Takesuke, M., Hisao, I., Masaharu, D. and Yoshio, A., "Laser Scanning Optical System with Plastics Lenses Featuring High Resolution," Proc. of SPIE, Vol. 1670, pp. 404-415, 1992. 

18. Yi, A. Y., & Jain, A., "Compression molding of aspherical glass lenses-A combined experimental and numerical analysis", Journal of the American Ceramic Society, Vol. 88, pp. 579-586, 2005. 

    상세보기

19. Carmina, L., William, T. P. and Peter, P. C., "Athermalization of a Single-Component Lens with Diffractive Optics," Applied Optics, Vol. 32, No. 13, pp. 2295-2302, 1993. 

    상세보기

20. Lee, E. S. and Back, S. Y., "A Study on optimum grinding factors for aspheric convex surface micro-lens using design of experiments", International Journal of Machine tools & Manufacture, Vol. 47, No. 3-4, pp. 509-520, 2007. 

    상세보기

저자의 다른 논문 :

문성민 (6) 류성기 (116)