최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기사물인터넷융복합논문지 = Journal of internet of things and convergence, v.7 no.3, 2021년, pp.75 - 80
장성철 (한국폴리텍IV대학 충주캠퍼스 지능형기계과) , 심요섭 (한국폴리텍IV대학 홍성캠퍼스 전기과)
Since the optimization of the diesel engine for the ship cannot satisfy the NOx emission limit by the method of reducing the NOx emission, it is necessary to reduce the NOx by post-processing the exhaust gas. In this study, we will review the feasibility of designing a binary nozzle and mixing chamb...
R. R., Antos, D. Zanoelo, and M. Morbidelli, "Experimental and modeling analysis of the NOx OUT process", Chem. Eng. SCI., Vol. 57, No. 1, pp. 27-38, 2002.
P. M. Schaber, J. Colson, S. Dietz, "Study of the urea thermal decomposition (pyrolysis) reaction and importance to cyanuric acid production", Am. Lab., pp. 13-21, 1999.
W. G. Park, J. K. Kim, S. C. Jang, S. W. Lee, "Development of SCR Catalyst Unit Integral Duct Burner", KSPSE, 2020 Spring Conference, pp.67-68, 2020.
Menter, F. and Esch, T., "Elements of Industrial Heat Transfer Predictions," 16th Bazilian Congress of Mechanical Engineering (COBEM), Uberlandia, Brazil. 2001.
D. C. Wilcox, "Turbulence modeling for CFD, DCW industries", Inc. La Canada, CA, 1993.
Launder, B. E. and Spalding, D. B., The numerical computational of turbulence flows", Computational methods in applied mechanics and engineering, Vol.3, pp.269-289, 1972.
K. Keller, "Low cost, high performance, high volume heatsinks", in Proc. Electronics Manufacturing Technology Symposium, pp. 113-118, 1998.
S. Narasimhan and J. Majdalani, "Characterization of compact heat sink models in natural convection", IEEE Trans. Components and Packaging Technologies, Vol. 25, Issue 1, pp.78-86, 2002.
S. P. Watson and B. G. Sammakia, "The thermal performance of a chip scale package array with simple block and plate heat sinks", in Proc. Thermal and Thermomechanical Phenomena in Electronic Systems Conf, pp.27-84, 2002.
S. C. Jang, S. M. Han, C. K. Lee, & H. C. Jung"FSI Analysis of Pneumatic Actuator", KSPSE Spring Conference, pp. 81-83, 2016.
S. C. Jang, H. D. Cho, and N. K. Kim, "Development of Gear Type Vane Damper Change Link Type in FD Fan, "KSMTE, Vol. 13, No. 1, pp.104-109. 2000.
S. C. Jang, S. H. Han. and J. W. Kim, "A Study on Performance Improvement of Gear Type Vane Damper in FD Fan(Productivity Increases & Construction Improvement)" KSMTE J. Vol.19, No.1, pp.134-139. 2010.
C. S. Yi, J. K. Hong, J. S. Suh, Y. I. Shin, and Y. S. Park, 2009, "Effect of Cutoff Angle on the Flow Characteristic of Turbo-Fan", Conference Proceedings of KSME Spring Annual Meeting(KSME09TE068), pp.311-318. 2015.
P. J. Witt, C. G. Solnordal, L. J. Mittoni, S. Finn, J. Pluta, "Optimising the Design of Fume Extraction Hoods Using a Combination of Engineering and CFD Modelling", Applied Mathematical Modelling, Vol.30, No.11, pp.1167-1179. 2006,
C. H. Kim, H. S. Ahn and T. H. Sok, "On a Method for the Durability Enhancement of Plastic Spur Gear Using Finite Element Analysis", Transactions of the KSME A, Vol. 27, No.2, pp.223-230. 2006.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.