최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Corrosion science and technology, v.20 no.4, 2021년, pp.204 - 209
송민지 (충남대학교신소재공학과) , 최가현 (충남대학교신소재공학과) , 채호병 (충남대학교신소재공학과) , 김우철 (한국지역난방공사미래개발원) , 김희산 (홍익대학교 재료공학과) , 김정구 (성균관대학교신소재공학부) , 이수열 (충남대학교신소재공학과)
Corrosion failure analysis of the flow plate, which is one of the accessories of the plate heat exchanger in a district heating system, was performed. The flow plate is made of 316 stainless steel, and water at different temperatures in the flow plate exchanges heat in a non-contact manner. The flow...
Corrosion failures(Eds: K. Elayaperumal, V. S. Raja), pp. 88 - 92, Wiley, Hoboken, NJ (2015).
W. Faes, S. Lecompte, Z. Y. Ahmed, J. V. Bael, R. Salenbien, K. Verbeken, and M. D. Paepe, Corrosion and corrosion prevention in heat exchangers, Corrosion Reviews, 37, 2 (2019). Doi: https://doi.org/10.1515/corrrev-2018-0054
Z. D. Fan, J. S. Du, Z. B. Zhang, Y. C. Ma, S. Y. Cao, K. Niu, and C. X. Liu, Internal leakage of plate heat exchangers caused by cooperation of pitting, crevice corrosion, and fretting, Engineering Failure Analysis, 96, 340 (2019). Doi: https://doi.org/10.1016/j.engfailanal.2018.10.007
K. M. Deen, M. A. Virk, C. I. Haque, R. Ahmad, and I. H. Khan, Failure investigation of heat exchanger plates due to pitting corrosion, Engineering Failure Analysis, 17, 886 (2010). Doi: https://doi.org/10.1016/j.engfailanal.2009.10.023
S.H. Khodamorad, N. Alinezhad, D. Haghshenas Fatmehsari, and K. Ghahtan, Stress corrosion cracking in Type.316 plates of a heat exchanger, Case Studies in Engineering Failure Analysis, 5, 59 (2016). Doi: http://dx.doi.org/10.1016/j.csefa.2016.03.001
ASM Handbook, Vol. 13B (Eds: S. D. Cramer, J. Bernard, S. Covino), pp.78-84, ASM International, Materials Park, OH (2005).
T. Ohmi, Y. Nakagawa, M. Nakamura, A. Ohki, and T. Koyama, Formation of chromium oxide on 316L austenitic stainless steel, Journal of Vaccum Science and Technology A, 14, 2505 (1996). Doi: http://dx.doi.org/10.1116/1.580010
E. D. Mackey and T. F. Seacord, Guidelines for Using Stainless Steel in the Water and Desalination Industries, Journal American Water Works Association, 5, E158 (2017). Doi: https://doi.org/10.5942/jawwa.2017.109.0044
S. Kim, J. Lee, J. Kim, and W. Kim, Effect of the Crevice Former on the Corrosion Behavior of 316L Stainless Steel in Chloride-Containing Synthetic Tap Water, Metals and materials international, 24, 516 (2018). Doi: https://doi.org/10.1007/s12540-018-0062-2
※ AI-Helper는 부적절한 답변을 할 수 있습니다.