$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

높은 광출력을 갖는 Laser Diode Bar의 열응력 개선: 마이크로-홈 도입을 통한 응력 분포 변화 분석
Thermal Stress Relief through Introduction of a Microtrench Structure for a High-power-laser-diode Bar 원문보기

한국광학회지 = Korean journal of optics and photonics, v.32 no.5, 2021년, pp.230 - 234  

정지훈 (인하대학교 정보통신공학과 광소자 및 LED 연구실) ,  이동진 (인하대학교 정보통신공학과 광소자 및 LED 연구실) ,  오범환 (인하대학교 정보통신공학과 광소자 및 LED 연구실)

초록
AI-Helper 아이콘AI-Helper

열응력 완화 기술은 고출력 레이저 다이오드의 빔의 품질과 안정성을 향상시키기 위한 주요 요소기술로 큰 주목을 받고 있다. 본 연구에서는 레이저 다이오드 바(LD-bar) chip-on-submount (CoS)에 발생하는 열응력 분포 양상을 SolidWorks 소프트웨어를 사용하여 해석하고, 마이크로-홈 구조 도입에 따라 열응력 완화에 미치는 영향을 체계적으로 분석한다. 마이크로-홈 구조는 누적응력을 차단하는 효과가 있는 반면, 열흐름을 방해하는 역기능도 있으므로, 시스템 구조와 방열금속판 두께에 따라 홈 깊이를 최적화할 필요가 있다. 간단히 도입된 예시구조에 대하여, LD-bar CoS의 칩 홀더 금속판에 도입하는 마이크로-홈 구조 최적화를 통해 칩 전면부 표면 응력을 마이크로-홈 구조가 없는 경우의 약 1/5 정도로 낮추었다. 향후 초고출력 시스템에서 방열을 위한 열저항과 광출력 빔크기를 최소한으로 유지하면서, 열응력을 효과적으로 완화시키는 구조로 활용이 기대된다.

Abstract AI-Helper 아이콘AI-Helper

Relief of thermal stress has received great attention, to improve the beam quality and stability of high-power laser diodes. In this paper, we investigate a microtrench structure engraved around a laser-diode chip-on-submount (CoS) to relieve the thermal stress on a laser-diode bar (LD-bar), using t...

주제어

표/그림 (5)

참고문헌 (20)

  1. Y. Izawa, N. Miyanaga, J. Kawanaka, and K. Yamakawa, "High power lasers and their new applications," J. Opt. Soc. Korea 12, 178-185 (2008). 

  2. H. Zhong, T. Duan, H. Lan, M. Zhou, and F. Gao, "Review of low-cost photoacoustic sensing and imaging based on laser diode and light-emitting diode," Sensors 18, 2264 (2018). 

  3. M. Xue, N. Yongqiang, Z. Jianwei, Z. Xing, P. Hangyu, Q. Li, and W. Lijun, "Research progress of red semiconductor laser diodes for laser display," Laser Optoelectron. Prog. 56, 180001 (2019). 

  4. T. Ozturk and O. Morikawa, "THz applications of multimode laser diodes: a review," Turk. J. Phys. 43, 303-313 (2019). 

  5. D. Agop-Forna, C. Cretu, C. Topoliceanu, M. Salceanu, D. Vasincu, and N. Forna, "Clinical applications of diode lasers in oral surgery: a review," Romanian J. Oral Rehabil. 13, 265-270 (2021). 

  6. H. Liu, S. Sun, L. Zheng, G. Wang, W. Tian, D. Zhang, H. Han, J. Zhu, and Z. Wei, "Review of laser-diode pumped Ti:sapphire laser," Microw. Opt. Technol. Lett. 63, 2135-2144 (2021). 

  7. M. Voss, C. Lier, U. Menzel, A. Barwolff, and T. Elsaesser, "Time-resolved emission studies of GaAs/AlGaAs laser diode arrays on different heat sinks," J. Appl. Phys. 79, 1170-1172 (1996). 

  8. E. Dabrowska, M. Teodorczyk, L. Lipinska, R. Kozinski, and A. Malag, "Application of graphene oxide for reduction of thermal resistance of high-power laser diodes," Electron. Lett. 49, 1550-1551 (2013). 

  9. P. Wen, D. Li, S. Zhang, J. Liu, L. Zhang, K. Zhou, M. Feng, Z. Li, A. Tian, and H. Yang, "High accuracy thermal resistance measurement in GaN/InGaN laser diodes," Solid-State Electron. 106, 50-53 (2015). 

  10. Z. Wu, S. D. You, Q. Du, and Y. Huang, "Influence of smile effect on beam properties of spectrally combined beams based on diode laser stacks," Opt. Commun. 471, 126031 (2020). 

  11. S. Khandekar, G. Sahu, K. Muralidhar, E. Y. Gatapova, O. A. Kabov, R. Hu, X. Luo, and L. Zhao, "Cooling of high-power LEDs by liquid sprays: challenges and prospects," Appl. Therm. Eng. 184, 115640 (2021). 

  12. X. Liu, M. H. Hu, C. G. Caneau, R. Bhat, and C.-E. Zah, "Thermal management strategies for high power semiconductor pump lasers," IEEE Trans. Compon. Packag. Technol. 29, 268-276 (2006). 

  13. S. C. Chaparala, F. Xie, C. Caneau, C. E. Zah, and L. C. Hughes, "Design guidelines for efficient thermal management of mid-infrared quantum cascade lasers," IEEE Trans. Compon. Packag. Manuf. Technol. 1, 1975-1982 (2011). 

  14. V. Novak, B. Podobnik, J. Mozina, and R. Petkovsek, "Analysis of the thermal management system for a pump laser," Appl. Therm. Eng. 57, 99-106 (2013). 

  15. H. Zhu, M. Hao, J. Zhang, W. Ji, X. Lin, J. Zhang, and Y. Ning, "Development and thermal management of 10 kW CW, direct diode laser source," Opt. Laser Technol. 76, 101-105 (2016). 

  16. K. Mehta, Y.-S. Liu, J. L. Wang, H. Jeong, T. Detchprohm, R. D. Dupuis, and P. D. Yoder, "Thermal design considerations for III-N vertical-cavity surface-emitting lasers using electro-opto-thermal numerical simulations," IEEE J. Quantum Electron. 55, 2400308 (2019). 

  17. X.-D. Zhang, X.-P. Li, Y.-X. Zhou, J. Yang, and J. Liu, "Vascularized liquid metal cooling for thermal management of kW high power laser diode array," Appl. Therm. Eng. 162, 114212 (2019). 

  18. Y.-T. Yu, X.-Q. Xiang, X.-Z. Zhou, K. Zhou, G.-W. Xu, X.-L. Zhao, and S.-B. Long, "Device topological thermal management of β -Ga2O3 Schottky barrier diodes," Chinese Phys. B 30, 067302 (2021). 

  19. B.-G. Ji and B.-H. O, "Heat conduction analysis and improvement of a high-power optical semiconductor source using graphene layers," Korean J. Opt. Photon. 26, 168-171 (2015). 

  20. B.-G. Ji, S.-G. Lee, S.-G. Park, and B.-H. O, "Bypass heat sink analysis for a laser diode bar with a top canopy," Curr. Opt. Photon. 1, 113-117 (2017). 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로