최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the Korean Recycled Construction Resources Institute = 한국건설순환자원학회 논문집, v.9 no.3, 2021년, pp.268 - 275
김호진 (목원대학교 건축공학과) , 배제현 (충남대학교 분석과학기술대학원) , 정용훈 (목원대학교 건축공학과) , 박선규 (목원대학교 건축공학과)
The three factors that determine the strength of concrete are the strength of cement paste, aggregate and ITZ(Interfacial Transition Zone) between aggregate and cement paste. Out of these, the strength of ITZ is the most vulnerable. ITZ is formed in 10~50㎛, the ratio of calcium hydroxide is h...
An, K.S., Lee, K.M. (1998). A study of factors influencing the fracture toughness of mortar-aggregate interfaces, Journal of the Korean Society of Civil Engineers, 18(1-6), 819-828 [in Korean].
Chang, J.H., Park, J.H. (2007). A study in the electrical circuit model of the electrode/electrolyte interface for improving electrochemical impedance fitting, The Transactions of The Korean Institute of Electrical Engineers, 55(6), 1087-1091 [in Korean].
Lee, K.H., Yang, K.H. (2018). Proposal for revision of lightweight aggregate concrete specifications based on in-situ quality control on concrete, Journal of the Korea Build Construction, 18(3), 211-218 [in Korean].
Lyu, K., She, W. (2019). Determination of aggregate surface morphology at the interfacial transition zone (ITZ). JoVE (Journal of Visualized Experiments), (154), e60245.
Park, J.H., Lee, H.S. (2017). An experimental study of the corrosion behavior evaluation of rebar in concrete by using electrochemical impedance spectroscopy(EIS) method, Journal of the Korea Institute for Structural Maintenance and Inspection, 21(1), 83-90 [in Korean].
Prokopski, G., Halbiniak, J. (2000). Interfacial transition zone in cementitious materials, Cement and Concrete Research, 30(4), 579-583.
Tao, G., Gao, C., Qiao, Z. (2017). Electrochemical impedance spectroscopy study of the compressive strength of concrete, International Journal of Electrochemical Science, 12, 11692-11700.
Vargas, P., Restrepo-Baena, O., Tobon, J.I. (2017). Microstructural analysis of interfacial transition zone(ITZ) and its impact on the compressive strength of lightweight concretes, Construction and Building Materials, 137, 381-389.
Wasserman, R., Bentur, A. (1996). Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength, Cement and Concrete Composites, 18(1), 67-76.
Yang, K.H. (2019). Evaluation of mechanical properties of lightweight concrete using bottom ash aggregates, Journal of the Korea Concrete Institute, 31(4), 331-337 [in Korean].
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.