최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.15 no.3, 2021년, pp.7 - 12
박현준 (한국생산기술연구원 친환경열표면처리연구부문) , 조균택 (한국생산기술연구원 친환경열표면처리연구부문) , 문경일 (한국생산기술연구원 친환경열표면처리연구부문) , 김태범 (한국생산기술연구원 친환경열표면처리연구부문) , 김상섭 (인하대학교 신소재공학과)
Plastic injection molds used for rapid heating and cooling must minimize surface damage due to friction and maintain excellent thermal and low electrical conductivity. Accordingly, various surface treatments are being applied. The properties of Al2O3 coating and DLC coating were compared to find the...
J.C.G. Milan, A.R. Machado, I.V. Tomaz, L.R.R. da Silva, C.A. Barbosa, M. Mia, D.Y. Pimenov, "Effects of calcium-treatment of a plastic injection mold steel on the tool wear and power consumption in slot milling", J. Mater. Res. Technol. 13, pp. 1103-1114, 2021.
K. Schutzer, A.L. Helleno, S.C. Pereira, "The influence of the manufacturing strategy on the production of molds and dies", J. Mater. Pro. Technol. 179, pp. 172-177, 2006.
P. Krajnik, J. Kopac, "Modern machining of die and mold tools", J. Mater. Pro. Technol. 157-158, pp. 543-552, 2004.
Z. Li, J. Zhang, B. Dai, Y. Liu, "Microstructure and corrosion resistance property of laser transformation hardening pre-hardened AISI P20 plastic die steel" Opt. Laser Technol. 122, 105852, 2020.
K. Van Acker, K. Vercammen, "Abrasive wear by TiO2 particles on hard and on low friction coatings", Wear 256, pp. 353-361, 2004.
B. Zabala, X. Fernandez, J.C. Rodriguez, A. Lopez-Ortega, E. Fuentes, R. Bayon, A. Igartua, F. Girot, "Mechanism-based wear models for plastic injection moulds", Wear 440-441, 203105, 2019.
J. Robertson, "Hard amorphous (diamond-like) carbons", Prog. Solid State Chem. 21, 199-333, 1991.
N. Nelson, R.T. Rakowski, J. Franks, P. Woolliams, P. Weaver, B.J. Jones, "The effect of substrate geometry and surface orientation on the film structure of DLC deposited using PECVD" Surf. Coat. Technol. 254, pp. 73-78, 2014.
S.D.A. Lawes, M.E. Fizpatrick, S.V. Hainsworth, "Evaluation of the tribological properties of DLC for engine applications", J. Phys. D: Appl. Phys. 40, pp. 5427-5437, 2007.
T. Wu, K. Cheng, "An investigation on the micro cutting performance of diamond-like carbon coatings using finite element method", Int. J. Adv. Manuf. Technol. 73, pp. 1321-1340, 2014.
Y. Sugaya, Y. Motohashi, "Development of Shrinkage-Fit Die Coated with Film Possessing Low Friction Coefficient for Compacting Metal Powders", J. JSTP 48, pp. 110-114, 2007.
A. Grill, B. Meyerson, V. Patel, "Interface modifications for improving the adhesion of a-C:H films to metals", J. Mater. Res. 3 (2), pp. 214-217, 1988.
Y. Jun, J.Y. Choi, K.R. Lee, B.K. Jeong, S.K. Kwon, C.H. Hwang, "Application of diamondlike carbon films to spacer tools for electron guns of cathode ray tube (CRT)", Thin Solid Films 377-378, pp. 233-238, 2000.
Q. Zhang, S.F. Yoon, S. Zhgoon, B. Gan, J. Ahn, A. Revkov, A. Rusli, "Study of diamond like carbon films on LiNbO3", Thin Solid Films 360, pp. 274-277, 2000.
G. Capote, G.C. Mastrapa, V.J. Trava-Airoldi, "Influence of acetylene precursor diluted with argon on the microstructure and the mechanical and tribological properties of aC: H films deposited via the modified pulsed-DC PECVD method", Surface & Coatings Technology 284, pp. 145-152, 2015.
P. Mosaner, M. Bonelli, A. Miotello, "Pulsed laser deposition of diamond-like carbon films: reducing internal stress by thermal annealing", Appl. Surf. Sci. 208-209, pp. 561-565, 2003.
L. Yu, D. Yang, Q. Wei, L. Zhang, "Constructing of strawberry-like core-shell structured Al 2 O 3 nanoparticles for improving thermal conductivity of nitrile butadiene rubber composites", Compos. Sci. Eng. 209, 108786, 2021.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.