참고문헌 (13)

1. Q. Wilhelmsen, D. Berstad, A. Aasen, and P. Neksa, "Reducing the exergy destruction in the cryogenic heat exchangers of hydro liquefaction processes", Int. J. hydrogen energy, Vol. 43, No. 10, 2018, pp.5033-5047, doi: https://doi.org/10.1016/j.ijhydene.2018.01.094. 

   상세보기

2. T. Kim, B. I. Choi, Y. S. Han, and K. H Do, "Thermodynamic analysis of a hydrogen liquefaction process for a hydrogen liquefaction pulot platn with a small capacity", Trans Korean Hydrogen New Energy Soc, Vol. 31, No. 1, 2020, pp. 41-48, doi: https://doi.org/10.7316/KHNES.2020.31.1.41. 

   원문보기 상세보기

3. J. W. Leachman, R. T. Jacobsen, S. G. Penoncello, and E.W. Lemmon, "Fundamental equations of state for parahydrogen, normal hydrogen, and orthohydrogen", J. Phys. Chem. Ref. Data, Vol. 38, No. 721, 2009, doi: https://doi.org/10.1063/1.3160306. 

   상세보기

4. P. J. Donaubauer, U. Cardella, L. Decker, and H. Klein, "Kinetics and heat exchanger design for catalytic ortho-para hydrogen conversion durting liquefaction", Chem. Eng. Technol, Vol. 42, No. 3 2019, pp. 669-679, doi: https://doi.org/10.1002/ceat.201800345. 

   상세보기

5. B. Sun, D. Wadnerkar, R. P. Utikar, M. Tade, N. Kavanagh, S. Faka, G. M. Evans, and V. K. Pareek, "Modeling of cryogenic liquefied natural gas ambient air vaporizers", Ind. Eng. Chem. Res, Vol. 57, No. 28, 2018, pp. 9281-9291, doi: https://doi.org/10.1021/acs.iecr.8b01226. 

   상세보기

6. M. Ichard, Q. R. Hansen, P. Middha, and D. Willoughby, "CFD computations of liquid hydrogen releases", Int. J. hyrogen energy, Vol 37, No. 22, 2012, pp. 17380-17389, doi: https://doi.org/10.1016/j.ijhydene.2012.05.145. 

   상세보기

7. D. C. Lee, H. Afrianto, H. S. Chung, and H. M. Jeong, "Numerical analysis of LNG vaporizer heat transfer characteristic in LNG fuel ship", The Korean Society of Marine Eng, Vol. 37, No. 1, 2013, pp. 22-28, doi: https://doi.org/10.5916/jkosme.2013.37.1.22. 

   원문보기 상세보기

8. F. Huerta and V. Vesovic, "CFD modelling of the isobaric evaporation of cryogenic liquids in storage tanks", Int. J. heat and mass transfer, Vol. 176, 2021, pp. 121419, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121419. 

   상세보기

9. S. Beak, J. H. Kim, S. Jeong, and J. Jung, "Development of highly effective cryogenic printed circuit heat exchanger (PCHE) with low axial conduction", Cryogenics, Vol. 52, No. 7-9, 2012, pp. 366-374, doi: https://doi.org/10.1016/j.cryogenics.2012.03.001. 

   상세보기

10. D. Popov, K. Fikiin, B. Stankov, G. Alvarez, M. Y. Idrissi, A. Damas, J. Evans, and T. Brown, "Cryogenic heat exchangers for process cooling and renewable energy storage: a review", App. Thermal Eng, Vol. 153, 2019, pp. 275-290, doi: https://doi.org/10.1016/j.applthermaleng.2019.02.106. 

    상세보기

11. "Standard test method for freezing point of aqueous engine coolants", ASTM D1177-17, 2017, Retrieved from https://www.astm.org/Standards/D1177.htm. 

12. "ANSYS fluent theory guide", ANSYS, 2013. 

13. "Fuelingprotocols for light duty gaseous hydrogen surface vehicles J2601_202005", SAE MOBILUS, 2020, Retrieved from https://www.sae.org/standards/content/j2601_202005/. 

저자의 다른 논문 :

손상호 (7)