최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.34 no.5, 2021년, pp.269 - 276
곽성훈 (Gyeongbuk Hybrid Technology Institute) , 문지훈 (Gyeongbuk Hybrid Technology Institute) , 홍상휘 (Gyeongbuk Hybrid Technology Institute) , 권순덕 (Gyeongbuk Hybrid Technology Institute) , 김병하 (KCA) , 김태용 (KCA (Korea Composites Application Co.))
PCM (Prepreg Compression Molding) process is a high-speed molding technology that can manufacture high-quality CFRP (Carbon Fiber Reinforced Plastic) parts. Compared to the autoclave process, it generates less waste and can significantly reduce cycle time, so various studies are being conducted in t...
Akiyama, K., "Development of PCM* Technology," SPE Automotive and Composites Divisions-11th Annual Automotive Composites Conference and Exhibition, ACCE 2011, 2011.
Reichanadter, A., Dustin, J., Balijepalli, B., and Mansson, J., "Process Modeling and Flexible Manufacturing of Multi-phase Resin Based Thermoset and Thermoplastic Prepreg," 2018.
Nguyen, F.N., Yoshioka, K., Kamae, T., Taketa, I., and Kitano, A., "Fast-cycle Cfrp Manufacturing Technologies for Automobile Applications".
Holmes, M., "High Volume Composites for the Automotive Challenge," Reinforced Plastics, Vol. 61, No. 5, 2017, pp. 294-298.
Taylor, T., Penney, D., and Yanagimoto, J., "One-Step Process for Press Hardened Steel-Carbon Fiber Reinforced Thermoset Polymer Hybrid Parts," Steel Research International, Vol. 91, No. 10, 2020, pp. 2000085.
Wulfsberg, J., Herrmann, A., Ziegmann, G., Lonsdorfer, G., Stoss, N., and Fette, M., "Combination of Carbon Fibre Sheet Moulding Compound and Prepreg Compression Moulding in Aerospace Industry," Procedia Engineering, Vol. 81, 2014, pp. 1601-1607.
Pasco, C., and Kendall, K., "Characterisation of the Thermoset Prepreg Compression Moulding Process," SPE Automotive and Composites Divisions-16th Annual Automotive Composites Conference and Exhibition, ACCE 2016, 2016.
Lee, J.-M., Kim, B.-M., and Ko, D.-C., "Development of Vacuum-assisted Prepreg Compression Molding for Production of Automotive Roof Panels," Composite Structures, Vol. 213, 2019, pp. 144-152.
Khan, M., Pasco, C., Reynolds, N., and Kendall, K., "On the Validity of Bias-extension Test Method for the Characterisation of In-plane Shear Properties of Rapid-cure Prepregs," Composite Structures, Vol. 246, 2020, pp. 112399.
Akermo, M., Larberg, Y., Sjolander, J., and Hallnader, P., "Influence of Interply Friction on the Forming of Stacked Prepreg," The 19th International Conference on Composite Materials (ICCM19), July 28 to August 2, 2013 in Montreal, Canada. Curran Associates, Inc., 2013, pp. 919-928.
Hawkes, A., "Hexcel at CAMX 2015," Reinforced Plastics, Vol. 60, No. 1, 2016, pp. 45-49.
Hwang, B.S., Um, M.K., and Lee, S.K., "A Study on the Process Parameters for High-Quality Laminates Using Resin Transfer Molding," Composites Research, Vol. 10, No. 3, 1997, pp. 22-33.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.