참고문헌 (18)

1. Sele, C., Von Werne, T., Friend, R., and Sirringhaus, H., "Lithography-Free, Self-Aligned Inkjet Printing with Sub-Hundred-Nanometer Resolution," Advanced Materials, Vol. 17, pp. 997-1001, 2005. 

   상세보기

2. Ko, S., Pan, H., Grigoropoulos, C., Luscombe, C., Frechet, J., and Poulikakos, D., "All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles," Nanotechnology, Vol. 18, 345202, 2007. 

   상세보기

3. de Gans, B., Duineveld, P., and Schubert, U., "Inkjet Printing of Polymers: State of the Art and Future Developments," Advanced Materials, Vol. 16, pp. 203-213, 2004. 

   상세보기

4. Wang, Y., Boker, J., and Lee, A., "Maskless lithography using drop-on-demand inkjet printing method," Proc. SPIE 5374, Emerging Lithographic Technologies VIII, pp. 628-636, 2004. 

5. Kang, B., Lee, W., and Cho, K., "Recent Advances in Organic Transistor Printing Processes," ACS Applied Materials&Interfaces, Vol. 5, pp. 2302-2315, 2013. 

   상세보기

6. Sun, Y., Zhang, Y., Liang, Q., Zhang, Y., Chi, H., Shi, Y., and Fang, D., "Solvent inkjet printing process for the fabrication of polymer solar cells," RCS adv, Vol. 3, pp. 11925-11934, 2013. 

7. Scalisi, R., Paleari, M., Favetto, A., Ariano, P., Pandolfi, P., and Chiolerio, A., "Inkjet printed flexible electrodes for surface electromyography," Organic Electronics, Vol. 18, pp. 89-94, 2015. 

   상세보기

8. Quan, J., Saaem, I., Tang, N., Ma, S., Negre, N., Gong, H., White, K., and Tian, J., "Parallel on-chip gene synthesis and application to optimization of protein expression," Nature Biotechnology, Vol. 29, pp. 449-452, 2011. 

   상세보기

9. Lee, Y., "Development of a Paper Strain Gauge using Inkjet-printing Technology," Journal of the Semiconductor & Display Technology, Vol. 14, pp. 23-27, 2015. 

   원문보기 상세보기

10. Kwon, K., "Waveform Design Methods for Piezo Inkjet Dispensers Based on Measured Meniscus Motion," Journal of Microelectromechanical Systems, Vol. 18, pp. 1118-1125, 2009. 

    상세보기

11. Kwon, K., Kim W, "A waveform design method for high-speed inkjet printing based on self-sensing measurement," Sensors and Actuators A: Physical, Vol. 140, pp. 75-83, 2007. 

    상세보기

12. Liu, Y., Pai, Y., Tsai, M., and Hwang, W., "Investigation of driving waveform and resonance pressure in piezoelectric inkjet printing," Applied Physics A, Vol. 109, pp. 323-329, 2012. 

    상세보기

13. Basaran, O., "Small-Scale Free Surface Flows with Breakup: Drop Formation and Emerging Applications," AlChE Journal, Vol. 48, pp. 1842-1848, 2004. 

    상세보기

14. Lopez, M., Sanchez, J., and Estrada, M., "Characterization of PEDOT:PSS dilutions for inkjet printing applied to OLED fabrication," 7th International Caribbean Conference on Device, Circuits and Systems, pp. 165-168, 2008. 

15. Kwon, K., "Experimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curve," Journal of Micro-mechanics and Microengineering, Vol. 20, 1105005, 2010. 

16. Alvin, U., and Basaran, O., "A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production," Physics of Fluids, Vol. 14, L1-L4, 2002. 

    상세보기

17. Liu, T., Tsai, M., and Pai, Y., "Control of droplet formation by operating waveforms for inks with various viscosities in piezoelectric inkjet printing," Applied Physics A 111, pp. 509-516, 2013. 

    상세보기

18. Microfab Technote., "Report on waveforms for customer," Available at: http://www.microfab.com/technotes, 2006. 

저자의 다른 논문 :

김기은 (7) 박종운 (30)