최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산림과학회지 = Journal of korean society of forest science, v.111 no.4, 2022년, pp.567 - 582
최윤성 (국립산림과학원 산림기술경영연구소) , 조민재 (국립산림과학원 산림기술경영연구소) , 문호성 (국립산림과학원 산림기술경영연구소) , 오재헌 (국립산림과학원 산림기술경영연구소)
Chainsaw use for motor-manual timber harvesting in South Korea is associated with worker safety issues. However, forestry operations such as timber harvesting have already been mechanized to reduce hazards to workers and increase productivity. This study analyzed the productivities and costs of fell...
Adebayo, A.B., Han, H.S. and Johnson, L. 2007. Productivity?and cost of cut-to-length and whole-tree harvesting in a?mixed-conifer stand. Forest Products Journal 57(6): 59-69.?
Acosta, F.C., Silva, I.M., Garcia, M.L. and Melo, R.R.D. 2020.?Productivity and costs of harvester cutting of teak trees?for thinning. Floresta e Ambiente 28.?
Alam, M., Acuna, M. and Brown, M. 2013. Self-levelling?feller-buncher productivity based on Lidar-derived slope.?Croatian Journal of Forest Engineering: Journal for Theory?and Application of Forestry Engineering 34(2): 273-281.?
Bell, J.L. 2002. Changes in logging injury rates associated?with use of feller-bunchers in West Virginia. Journal of?Safety Research 33(4): 463-471?
Bilici, E., Akay, A.E. and Abbas, D. 2019. Assessing the effects?of site factors on the productivity of a feller buncher: A?time and motion analysis. Journal of Forestry Research?30(4): 1471-1478.?
Brinker, R.W., Kinard, J., Rummer, B. and Lanford, B. 2002.?Machine rates for selected forest harvesting machines.?Circular 296(Revised). Alabama Agricultural Experimental?Station. Auburn. Alabama. USA. pp. 32.?
Cho, M.J. 2015. Efficient tree-length harvesting system using?tower-yarder and tractor-yarder. (Dissertation), ChunChoen. Kangwon National University.
Cho, M.J., Choi, Y.S., Paik, S.H., Mun, H.S., Cha, D.S., Han,?S.K. and Oh, J.H. 2019. Comparison of productivity and?cost between two integrated harvesting systems in South?Korea. Forests 10(9): 763.?
Choi, Y.S., Cho, M.J., Mun, H.S., Kim, D.H., Cha, D.S., Han,?S.K. and Oh, J.H. 2018. Analysis of yarding productivity?and cost of tower-yarder based on excavator using radioControlled double clamp carriage. Journal of Korean?Society of Forest Science 107(3): 266-277.?
Conway, S. 1982. Logging practices: Principles of timber harvesting systems. Miller Freeman Publications, San?Francisco, pp. 432.?
Dykstra, D.P. 1975. Production rates and costs for cable,?balloon, and helicopter yarding systems in old-growth?Douglas-fir(Dissertation). Oregon State University. pp.?1-44.?
Gerasimov, Y., Senkin, V., Vaatainen, K. 2012. Productivity of?single-grip harvesters in clear-cutting operations in the?northern European part of Russia. European Journal of?Forest Research 131(3): 647-654.?
Glade, D. 1999. Single-and double-grip harvesters-productive?measurements in final cutting of shelterwood. Journal of?Forest Engineering 10(2): 63-74.?
Forbrig, A. 2000. Konzeption und anwendung eines informationssystems uber forstmaschinen auf der grundlage von?maschinenbuchfuhrung, leistungsnachweisen und technischen daten. KWF.?
Konzeption und anwendung eines informationssystems uber?forstmaschinen auf der grundlage von maschinenbuchfuhrung,?leistrungsnachweisen und technischen daten. Doctor?Theses. Technische universitat munchen, Bericht Nr.29/2000 der Kuratoriums fur waldarbeit und forsttechnik,?Grobumstadt, p .213.?
Han, W.S. 2008. Development of an estimation model for?timber harvesting and transportation costs. Department of?Forest Resources Graduate School, Kookmin University.?pp. 157.?
Han, W.S., Cho, K.H., Oh, J.H., Song, T.H., Kim, J.W. and?Shin, M.Y. 2009. Felling productivity in Korean Pine?stands by using chain saw. Journal of Korean Forest?Society 98(4): 451-457.?
Hartsough, B.R., Zhang, X. and Fight, R.D. 2001. Harvesting?cost model for small trees in natural stands in the interior?northwest. Forest Products Journal 51(4): 54-56.?
Jirousek, R., Klvac, R. and Skoupy, A. 2007. Productivity?and costs of the mechanized cut-to-length wood harvesting?system in clear-felling operations. Journal of forest science?53(10): 476-482.?
Kim, M.K. and Park, S.J. 2012. An analysis of the operational?time and productivity in whole-tree and cut-to-length?logging operation system. Journal of Korean Society of?Forest Science 101(3): 344-355.?
Kim, M.K. and Park, S.J. 2013. An analysis of the operational?cost in the whole-tree and cut-to-length logging operation?system. Journal of Korean Society of Forest Science?102(2): 229-238.?
Korea Forest Service (KFS). 2021. Statistical yearbook of?forestry, pp. 36;267.?
Korea National Oil Corporation. 2022. Domestic oil prices.?http://www.knoc.co.kr/ (2022. 02. 23)?
LeDoux, C.B. and Huyler, N.K. 2001. Comparison of two?cut-to-length harvesting systems operating in eastern?hardwoods. Journal of Forest Engineering 12(1): 53-60.?
Lee, J.A. 2013. Productivity and cost analysis of whole-tree?harvesting system using swing-yarder. (Dissertation),?Chun-Choen. Kangwon National University.?
McEwan, A., Magagnotti, N. and Spinelli, R. 2016. The effects?of number of stems per stool on cutting productivity in?coppiced Eucalyptus plantations. Silva Fenn 50(2): 1448.?
Ministry of Employment and Labor (MOEL). 2021. Analysis?of industrial accident status. pp. 13.?
Miyata, E.S. 1980. Determining fixed and operation costs of?logging equipment. U.S. Department of Agriculture Forest?Service General Technical Report. NC-55. pp. 16.?
Nakagawa, M., Hamatsu, J., Saitou, T. and Ishida, H. 2007.?Effect of tree size on productivity and time required for?work elements in selective thinning by a harvester. International Journal of Forest Engineering 18(2): 24-28.?
Nakagawa, M., Hayashi, N. and Narushima, T. 2010. Effect?of tree size on time of each work element and processing?productivity using an excavator-based single-grip harvester?or processor at a landing. Journal of Forest Research 15(4):?226-233.?
Pausch, R. (2002). Ein System-Ansatz zur Untersuchung von?Zusammenhangen zwischen Waldstruktur, Arbeitsvolumina und Kosten der technischen und biologischen Produktion in Forstrevieren ost-und nordbayerischer Mittelgebirge (Doctoral dissertation, Technische Universitat?Munchen).?
Shin, M.Y. and Han, W.S. 2006. Development of a forest?inventory system for the sustainable forest management.?Journal of Korean Forest Society 95(3): 370-377.?
Slappendel, C., Laird, I., Kawachi, I., Marshall S. and Cryer?C. 1993. Factors affecting work-related injury among?forestry workers: A review. Journal of Safety Research?24(1): 19-32.?
Snee, R.D. 1977. Validation of regression model: Methods?and example. Technometrics 19: 415-428.?
Slappendel, C., Laird, I., Kawachi, I., Marshall S. and Cryer?C. 1993. Factors affecting work-related injury among?forestry workers: A review. Journal of Safety Research?24(1): 19-32.?
Spinelli, R., Magagnotti, N. and Hartsough, B. 2011. Productivity norms for harvesters and processors used in Italy.?Formec Austria.?
Spinelli, R., Lombardini, C. and Magagnotti, N. 2014. The?effect of mechanization level and harvesting system on?the thinning cost of Mediterranean softwood plantations.?Silva Fennica 48(1): 1-15.?
Stampfer, K. and Steinmuller, T. 2001. A new approach to?derive a productivity model for the harvester Valmet 911?Snake. In Proc., international mountain logging and 11th?Pacific Northwest skyline symposium-a forest engineering?odyssey (pp. 254-262).?
Strandgard, M., Walsh, D. and Mitchell, R. 2015. Productivity?and cost of whole-tree harvesting without debarking in?a Eucalyptus nitens plantation in Tasmania, Australia.?Southern Forests: A Journal of Forest Science 77(3):?173-178.?
Raymond, K. 2012. Innovation to increase profitability of steep?terrain harvesting. NZ Journal of forestry, August 2012.?57(2): 19-23.?
Vitorelo, B., Han, H.S. and Elliot, W. 2011. Productivity and?cost of integrated harvesting for fuel reduction thinning?in mixed-conifer forest. Forest Products Journal 61(8):?664-674.?
Woo, B.M. Park, J.M., Lee, J.W. and Chung, N.H. 1990, A?study on economical analysis of yarding operation by cable?crane. Journal of Korean Forest Society 79(4): 413-418.?
Zinkevicius, R., Steponavicius, D., Vitunskas, D. and Cinga,?G. (2012). Comparison of harvester and motor-manual logging in intermediate cuttings of deciduous stands. Turkish?Journal of Agriculture and Forestry 36(5): 591-600.?
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.