최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.35 no.6, 2022년, pp.463 - 468
차가락 (School of Mechanical Engineering, Chung-Ang University) , 장승환 (School of Mechanical Engineering, Chung-Ang University)
The high porosity of the infill pattern of carbon chopped fiber-reinforced Nylon composite structures fabricated by the fused filament fabrication (FFF) type 3D printers determines the mechanical performance of the printed structures. This study experimentally evaluated the mechanical performance of...
Thompson, M.K., Moroni, G., Vaneker, T., Fadel, G., Campbell,?R.I., Gibson, I. Bernard, A., Schulz, J., Graf, P., Ahuja, B., and?Martina, F., "Design for Additive Manufacturing: Trends,?Opportunities, Considerations, and Constraints," Cirp Annals,?Vol. 65, Issue 2, 2016, pp. 737-760.
Dizon, J.R.C., Espera Jr, A.H., Chen, Q., and Advincula, R.C.,?"Mechanical Characterization of 3D-printed Polymers," Additive Manufacturing, Vol. 20, 2018, pp. 44-67.
Lu, B., Li, D., and Tian, X., "Development Trends in Additive?Manufacturing and 3D Printing," Engineering, Vol. 1, Issue 1,?2015, pp. 85-89.
De Leon, A.C., Chen, Q., Palaganas, N.B., Palaganas, J.O.,?Manapat, J., and Advincula, R.C., "High Performance Polymer?Nanocomposites for Additive Manufacturing Applications,"?Reactive and Functional Polymers, Vol. 103, 2016, pp. 141-155.
Baek, U.G., Nam, G.B., Roh, J.S., Park, S.E., and Roh, J.U., "A?Study on the Improvement of Bending Characteristics of 3D?Printed Thermoplastic Structures Reinforced at the Lateral?Surface using Continuous Fiber Reinforced Thermosetting?Composites," Composites Research, Vol. 34, No. 2, 2021, pp. 136-142.
Wang, P., Zou, B., and Ding, S., Shi, Z., Ma, Y., and Yao, P.,?"Preparation of Short CF/GF Reinforced PEEK Composite Filaments and Their Comprehensive Properties Evaluation for?FDM-3D Printing," Composites Part B: Engineering, Vol. 198,?2020, 108175.
Manapat, J.Z., Mangadlao, J.D., Tiu, B.D.B., Tritchler, G.C., and?Advincula, R.C., "High-strength Stereolithographic 3D Printed?Nanocomposites: Graphene Oxide Metastability" ACS Applied?Materials & Interfaces, Vol. 9, Issue 11, 2017, pp. 10085-10093.
Advincula, R.C., Dizon, J.R.C., Chen, Q., Niu, I., Chung, J.,?Kilpatrick L., and Newman, R., "Additive Manufacturing for?COVID-19: Devices, Materials, Prospects, and Challenges,"?MRS Communications, Vol. 10, Issue 3, 2020, pp. 413-427.
Oh, E.Y., Lee, J.W., and Suhr, J.H., "3D Printable Composite?Materials: A Review and Prospective" Composites Research, Vol.?31, No. 5, 2018, pp. 192-201.
Kabir, S.M.F., Mathur, K., and Seyam, A.F.M., "The Road to?Improved Fiber-reinforced 3D Printing Technology," Technologies, Vol. 8, Issue 4, 2020, pp. 51.
Saeed, K., McIlhagger, A., Harkin-Jones, E., McGarrigle, C.,?Dizon, D., Shar, M.A., McMillan, A., and Archer, E., "Characterization of Continuous Carbon Fibre Reinforced 3D Printed?Polymer Composites with Varying Fibre Volume Fractions,"?Composite Structures, Vol. 282, 2022, pp. 115033.
Somireddy, M., Singh, C.V., and Czekanski, A., "Analysis of the?Material Behavior of 3D Printed Laminates via FFF," Experimental Mechanics, Vol. 59, Issue 6, 2019, pp. 871-881.
Elkaseer, A., Schneider, S., and Scholz, S.G., "Experiment-based?Process Modeling and Optimization for High-quality and?Resource-efficient FFF 3D Printing," Applied Sciences, Vol. 10,?Issue. 8, 2020, pp. 2899.
Kubota, M., Hayakawa, K., and Todoroki, A., "Effect of Buildup Orientations and Process Parameters on the Tensile?Strength of 3D Printed Short Carbon Fiber/PA-6 Composites,"?Advanced Composite Materials, Vol. 31, No. 2 2022, pp. 119-136.
Blok, L.G., Longana, M.L., Yu, H., and Woods, B.K.S., "An?Investigation into 3D Printing of Fibre Reinforced Thermoplastic Composites," Additive Manufacturing, Vol. 22, 2018, pp.?176-186.
Barnik, F., Vasko, M., Handrik, M., Dorciak, F., and Majko, J.,?"Comparing Mechanical Properties of Composites Structures?on Onyx Base with Different Density and Shape of Fill," Transportation Research Procedia, Vol. 40, 2019, pp. 616-622.
Impens, D., and Urbanic, R.J., "Assessing the Impact of Postprocessing Variables on Tensile and Compression Characteristics for 3D Printed Components," IFAC-PapersOnLine, Vol. 48,?Issue 3, 2015, pp. 652-657.
Pascual-Gonzalez, C., San Martin, P., Lizarralde, I., Fernandez,?A., Leon, A., Lopes, C.S., and Fernandez-Blazquez, J.P., "Postprocessing Effects on Microstructure, Interlaminar and Thermal Properties of 3D Printed Continuous Carbon Fibre Composites," Composites Part B: Engineering, Vol. 210, 2021, pp.?108652.
Stava, O., Vanek, J., Benes, B., Carr, N., and M?ch, R., "Stress?Relief: Improving Structural Strength of 3D Printable Objects,"?ACM Transactions on Graphics (TOG), Vol. 31, Issue 4, 2012,?pp. 1-11.
Arefin, A.M.E., Khatri, N.R., Kulkarni, N., and Egan, P.F.,?"Polymer 3D Printing Review: Materials, process, and Design?Strategies for Medical Applications," Polymers, Vol. 13, Issue 9,?2021, pp. 1499.
Zigon, J., Kariz, M., and Pavlic, M., "Surface Finishing of 3DPrinted Polymers with Selected Coatings," Polymers, Vol. 12,?Issue 12, 2020, pp. 2797.
Kumar, K., and Kumar, G.S., "An Experimental and Theoretical?Investigation of Surface Roughness of Poly-jet Printed Parts:?This Paper Explains How Local Surface Orientation Affects?Surface Roughness in a Poly-jet Process," Virtual and Physical?Prototyping, Vol. 10, Issue 1, 2015, pp. 23-34.
Hetrick, D.R., Sanei, S.H.R., and Ashour, O., "Void Content?Reduction in 3D Printed Glass Fiber-Reinforced Polymer?Composites through Temperature and Pressure Consolidation,"?Journal of Composites Science, Vol. 6, Issue 5, 2022, pp. 128.
Karakurt, I., and Lin, L., "3D Printing Technologies: Techniques, Materials, and Post-processing," Current Opinion in?Chemical Engineering, Vol. 28, 2020, pp. 134-143.
Kabir, S.M.F., Mathur, K., and Seyam, A.F.M., "The Road to?Improved Fiber-reinforced 3D Printing Technology," Technologies, Vol. 8, Issue 4, 2020, pp. 5.
ASTM D638, Standard Test Method for Tensile Properties of?Plastics.
ASTM S. Standard Test Methods for Flexural Properties of?Unreinforced and Reinforced Plastics and Electrical Insulating?Materials. ASTM D790. Annual Book of ASTM Standards,?1997.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.