최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국분무공학회지 = Journal of ilass-korea, v.27 no.4, 2022년, pp.173 - 180
김지엽 (경북대학교 기계공학과) , 정철 (경북대학교 기계공학과) , 강원중 (경북대학교 기계공학과) , 김정웅 (경북대학교 기계공학과) , 홍정구 (경북대학교 기계공학과)
Cooling fog is being used in various parts of society such as fine dust reduction, cleanliness, and temperature drop. Cooling fog has the advantage of low flow rate and ease of use compared to other spray systems. In the case of cooling fog, it was confirmed that the injection angle increased as the...
F. Sultan, N. Ashgriz, D. R. Guildenbecher and P. E.?Sojka, "Handbook of Atomization and Sprays", Springer,?2011.
H. Lefebvre and V. G. McDonell, "Atomization and?Sprays, 2nd ed", CRC Press: Boca Raton, 2017.
S. Y. Lee, Atomization and Spray, Minumsa, 1996.
S. H. Shah, K. R. Pai, S. R. Shinde and B. N. Thorat,?"Analysis of a Vapor Compression Refrigeration System using a Fog-Cooled Condenser", Applied Thermal Engineering, Vol. 196, 2021, 117229.
R. Ghosh, T. K. Ray and R. Ganguly, "Cooling Tower?Fog harvesting in power plant-A pilot study", Energy,?Vol. 89, 2015, pp. 1018~1028.
C. Guo, W. Nie, C. Xu, H. Peng, C. Zhang, S. Li, N.?Yue, Z. Liu, S. Yang, Q. Ma and M. Li, "A Study of?the Spray Atomization and Suppression of Tunnel Dust?Pollution based on a CFD-based Simulation", Journal?of Cleaner Production, Vol. 276, 2020, 123632.
J. Sanchez-Hermosilla, F. Paez, V. J. Rincon and A. J.?Callejon, "Evaluation of a Fog Cooling System for?applying Plant-Protection Products in a Greenhouse?Tomato Crops", Crop Protection, Vol. 48, 2013, pp. 76~81.
K. Rajmund, "Advantages of Water Fog Use as a Fire?Extinguisher", Academic and Applied Research in Military and Public Management Science, Vol. 14, No. 2,?2015, pp. 259~264.
P. E. Santangelo, "Characterization of high- pressure?water-mist sprays: Experimental analysis of droplet?size and dispersion", Experimental Thermal and Fluid?Science, Vol. 34, No. 8, 2010, pp. 1353~1366.
Z. Wang, W. Wang and Q. Wang, "Optimization of?water mist droplet size by using CFD modeling for fire?suppressions", Journal of Loss Prevention in the Process Industries, Vol. 44, 2016, pp. 626~632.
C. N. Huang and Y. H. Ye, "Development of a water-mist cooling system: A 12,500 Kcal/h air-cooled chiller", Energy Reports, Vol. 1, 2015, pp. 123~128.
Y. Hikosaka, M. Kanechi, M. Sato and Y. Uno, "Dry-fog Aeroponics Affects the Root Growth of Leaf Lettuce (Lactuca sativa L. cv. Greenspan) by Changing?the Flow Rate of Spray Fertigation", Environmental?Control in Biology, Vol. 53, No. 4, 2015, pp. 181~187.
Z. Ning and K. Zhu, "Research on Prevention and Control Technologies of Harbor Pollution", 2009 International Conference on Energy and Environment?Technology, 2009, pp. 713~716.
T. Cutts, S. Kasloff, D. Safronetz and J. Krishnan,?"Decontamination of common healthcare facility surfaces contaminated with SARS-CoV-2 using peracetic?acid dry fogging", Journal of Hospital Infection, Vol. 109,?2021, pp. 82~87.
Y. Murata, Y. Kudo and M. Yonezawa, "Characteristics of a Dry Fog Ionizer", Journal of Physics: Conference Series, Vol. 142, 2008, 012066.
J. Krishnan, G. Fey, C. Stansfield, L. Landry, H. Nguy,?S. Klassen and C. Robertson, "Evaluation of a Dry?Fogging System for Laboratory Decontamination",?Applied Biosafety, Vol. 17, No. 3, 2012, pp. 132~141.
S. K. Chaulya, A. Chowdhury, S. Kumar. R. S. Singh,?S. K. Singh, R. K. Singh, G. M. Prasad, S. K. Mandal?and G. Banerjee, "Fugitive Dust Emission Control Study?for a developed smart dry fog system", Journal of?Environmental Management, Vol. 285, 2021, 112116.
A. Arbel, O. Yekutieli and M. Barak, "Performance of a?Fog System for Cooling Greenhouse", Journal of Agricultural Engineering Research, Vol. 72, No. 2, 1999,?pp. 129~136.
Kendarto, D. R. Handarto, M. Saukat, T. Herwanto and?K. Pandiangan, "Enhancement of Droplets Quality for?fog cooling system in a naturally-ventilated greenhouse using centrifugal and axial fans", IOP Conference Series: Earth and Environmental Science, Vol. 542,?2020, 012032.
A. Haeussermann, E. Hartung, T. Jungbluth, E. Vranken, J. M. Aerts and D. Berckmans, "Cooling effects?and evaporation characteristics of fogging systems in?an experimental piggery", Biosystems Engineering,?Vol. 97, No. 3, 2007, pp. 395~405.
V. Priedniece, V. Kirsanovs, M. Dzikevics, ?. Vigants,?I. Veidenbergs and D. Blumberga, "Experimental and?analytical study of the flue gas condenser-fog unit",?Energy Procedia, Vol. 158, 2019, pp. 822~827.
H. Toida, T. Kozai, K. Ohyama and Handarto, "Enhancing Fog Evaporation Rate using an Upward Air Stream?to improve Greenhouse Cooling Performance", Biosystems Engineering, Vol. 93, No. 2, 2006, pp. 205~211.
S. Buhl, A. Stich and C. Bulitta, "Dry fog disinfection?as an alternative method for room decontamination",?Current Directions in Biomedical Engineering, Vol. 7,?No. 2, 2021, pp. 427~429.
S. M. A. Najafi, P. Mikaniki and H. Ghassemi, "Microscopic and macroscopic atomization characteristics of?a pressure-swirl atomizer, injecting a viscous fuel oil",?Chinese Journal of Chemical Engineering, Vol. 28, No. 1,?2020, pp. 9~22.
M. Chaker, C. B. Meher-Homji and T. Mee III, "Inlet?Fogging of Gas Turbine Engines: Part B - Fog Droplet?Sizing Analysis, Nozzle Types, Measurement and Testing", ASME Turbo Expo 2002: Power for Land, Sea,?and Air, Vol. 4, 2002, pp. 429~441.
S. Wadekar, A. Yamaguchi and M. Oevermann, "Large-Eddy Simulation Study of Ultra-High Fuel Injection?Pressure on Gasoline Sprays", Flow, Turbulence and?Combustion, Vol. 107, 2021, pp. 149~174.
Y. Gao, X. Li, P. Chang and L. Liu, "Experimental?Study on Deliquification with Atomizing Nozzle in?Gas Well", IOP Conference Series: Earth and Environmental Science, Vol. 555, 2020, 012127.
E. Barakat, T. Jin, H. Wang, K. Hu and G. Wang,?"Experimental and numerical study of fogging cooling?performance through a cylindrical duct for a micro gas?turbine", Applied Thermal Engineering, Vol. 207, 2022,?118115.
B. Chen, D. Gao, Y. Li, C. Chen, X. Yuan, Z. Wang and?P. Sun, "Investigation of the droplet characteristics and?size distribution during the collaborative atomization?process of a twin-fluid nozzle", The International Journal of Advanced Manufacturing Technology, Vol. 107,?2020, pp. 1625~1639.
S. Li, C. Chen, Y. Wang, F. Kang and W. Li, "Study on?the Atomization Characteristics of Flat Fan Nozzles for?Pesticide Application at Low Pressures", Agriculture,?Vol. 11, No. 4, 2021, 309.
G. Gao, C. Wang and Z. Kou, "Experimental Studies?on the Spraying Pattern of a Swirl Nozzle for Coal?Dust Control", Applied Sciences, Vol. 8, No. 10, 2018,?1770.
S. Mandato, E. Rondet, G. Delaplace, A. Barkouti, L. Galet, P. Accart, T. Ruiz and B. Cuq, "Liquids' atomization with two different nozzles: Modeling of the?effects of some processing and formulation conditions?by dimensional analysis", Powder Technology, Vol. 224,?2012, pp. 323~330.
J. Y. Kim, S. J. Lee and J. G. Hong, "Spray Mode and?Monodisperse Droplet Properties of an Electrospray",?ACS Omega, Vol. 7, No. 32, 2022, pp. 28667~28674.
J. Y. Kim, S. J. Lee, G. Y. Baik and J. G. Hong, "Effects of?working fluids on spray modes and atomization characteristics in electrospray", J. Korean Soc. Precis. Eng,?Vol. 38, 2021, pp. 61~68.
K. W. Ku, J. G. Hong and C. W. Park, "Effect of assist-air of twin fluid atomizer on urea thermal decomposition", Atomization Sprays, Vol. 25, 2015, pp. 895~915.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.